Application of chelate forming resin Amberlite XAD-2-o-vanillinthiosemicarbazone to the separation and preconcentration of copper(II), zinc(II) and lead(II)

A very stable chelating resin matrix was synthesized by covalently linking o-vanillinthiosemicarbazone (oVTSC) with the benzene ring of the polystyrene-divinylbenzene resin Amberlite XAD-2 through a -NN- group. The resin was used successfully for the separation and preconcentration of copper(II), zinc(II) and lead(II) prior to their determination by atomic absorption spectrophotometry. The total sorption capacity of the resin was 850, 1500 and 2000 mug g(-1) of the resin for Cu(II), Zn(II) and Pb(II), respectively. For the quantitative sorption and recovery of Cu(II), Zn(II) and Pb(II), the optimum pH and eluants were pH 2.5-4.0 and 4 M HCl or 2 M HNO(3) for Cu(II), pH 5.5-6.5 and 1.0-2.0 M HCl for Zn(II) and pH 6.0-7.5 and 3 M HCl or 1 M HNO(3) for Pb(II). Both, the uptake and stripping of these metal ions were fairly rapid, indicating a better accessibility of the chelating sites. The t (1 2 ) values for Cu(II), Zn(II) and Pb(II) were also determined. Limit of tolerance of some electrolytes like NaCl, NaF, NaNO(3), Na(2)SO(4) and Na(3)PO(4) have been reported. The preconcentration factor for Cu(II), Zn(II) and Pb(II) was 90, 140 and 100 respectively. The method was applied for the determination of Cu(II), Zn(II) and Pb(II) in the water samples collected from Sabarmati river, Ahmedabad, India.     

Studies on the equilibrium uptake of some metal ions on titanium arsenate and titanium tungstoarsenate gels using radiotracers

Sorption of some univalent, divalent and trivalent metal ions has been studied on the hydrogen form of titanium arsenate and titanium tungstoarsenate gels as a function of initial solution concentration at pH 5–6. The effect of pH on maximum uptake (Q_max) has also been seen for some representative ions. Sorption of metal ion becomes almost negligible below pH 1.8, with the exception of monovalent cations. Rubidium ions exhibit interesting adsorption behaviour. The data have been compared with the exchange properties of these two inorganic ion exchangers, as reported earlier^6,8.     

Thermal decomposition of hydrazinium monoperchlorate in the molten state

The thermal decomposition of hydrazinium monoperchlorate (HP-1) in the molten state has been investigated using differential thermal analysis, thermogravimetric analysis, a constant volume manometric technique and mass-spectrometry. The stoichiometry of the reaction can be represented by the equation: 20 N₂H₅C1O₄ 13 NH₄C1O₄ + 3.5 Cl₂ + 2 O₂ + 13 N₂ + 0.5 N₂O + 0.5 H₂ + + 23.5 H₂OThe data seem to indicate that the mechanism, which involves an associated complex, remains unchanged from 140 to 190°. Consequently, impurities capable of forming associated complexes with the hydrazinium or the perchlorate ion desensitize the thermal decomposition of HP-1, the extent of desensitization being determined by the size, the charge and the concentration of the impurity.

---

Zusammenfassung Die thermische Zersetzung von Hydrazin-monoperchlorat (HP-1) im geschmolzenen Zustand wurde unter Einsatz der Differentialthermoanalyse, der thermogravimetrischen Analyse, der manometrischen Methode mit konstrantem Volumen und der Maßenspektrometrie untersucht. Die Stöchiometrie der Reaktion kann durch folgender Gleichung dargestellt werden: 20 N₂H₅C1O₄ 13 NH₄C1O₄ + 3.5 Cl₂ + 20₂ + 13 N₂ + 0.5 N₂O + 0.5 H₂ + 23.5 H₂ODie Angaben zeigen, dass der Mechanismus, in welchen ein assoziierter Komplex mit inbegriffen ist, im Temperaturenbereich von 140° bis 190° C unverändert bleibt. Folglich setzen Verunreinigungen, die mit dem Hydrazinoder dem Perchlorat-Ion assozüerte Komplexe zu bilden imstande sind, die Empfindlichkeit der thermischen Zersetzung von HP-1 herab, wobei das Ausmaß der Herabsetzung von der Grösse, der Ladung und der Konzentration der Verunreinigung abhängt.

---

Résumé La décomposition thermique en milieu fondu du monoperchlorate d'hydrazinium (HP-1) a été étudiée par analyse thermique différentielle, thermogravimétrie, manométrie à volume constant et spectromètrie de masse. La réaction peut être représentée par l'équation suivante: 20 N₂H₅C1O₄ 13 NH₄C1O₄ + 3.5 Cl₂ + 2 O₂ + 13 N₂ + 0.5 N₂O + 0.5 H₂ + 23.5 H₂OLes données semblent indiquer que le mécanisme mettant en jeu un complexe associé reste inaltéré dans l'intervalle de températures allant de 140 à 190°. Par conséquent, les impuretés qui pourraient former des complexes associés avec les ions hydrazinium ou perchlorate désensibilisent la décomposition thermique de HP-1, le taux de désensibilisation étant déterminé par la taille, la charge et la concentration de l'impureté.

---

(-1), , , - -. : 20 N₂H₅ClO₄ 13 NH₄ClO₄ + 3.5 l₂ + 2 ₂ + 13 N₂ + 0.5 N₂O + 0.5 ₂ + 23.5 ₂ , , - , 140° 190°. , , - , -1, , .

     

Kinetics and mechanism of oxidation of aspartic acid by bismuth(V) in HClO4-HF medium

The kinetics of oxidation of Aspartic acid by bismuth(V) studied in HClO₄-HF mixture iodometrically exhibit complex dependence with respect to aspartic acid (AA). The rate law (i) accounts for all the experimental observations. where [Bi(V)] and [AA] are the gross analytical concentration of all fluorobismuth(V) species and the equilibrium concentration of aspartic acid, respectively. The oxidation product of the amino acid was identified to be an aldehyde. HF and F^? do not affect the rate of the reaction. © John Wiley & Sons, Inc.     

Manual and flow-injection spectrophotometric assay of thiols, based on their S-nitrosation

A general assay procedure for a wide variety of thiols is described. The technique has three steps: (1) formation of S-nitrosothiols with nitrous acid, (2) destruction of the excess of nitrous acid, (3) hydrolysis of the S-nitrosothiols with mercuric ions and subsequent formation of an azo-dye by means of the nitrous acid liberated. Both manual and flow-injection analysis (FIA) versions of the assay are described. Since the final step of the assay does not depend on the thiol assayed but only on the reaction of nitrous acid to form azo-dyes, the calibration graphs should be identical for all thiols. The manual system is about four times as sensitive as the FIA system, but the latter permits a high sample throughput and shows significantly lower sensitivity to interference by tryptophan. Though this general technique cannot be used for the assay of many sterically hindered thiols, it can be used for the assay of some protein thiol groups.     

Inorganic-organic hybrid nanoparticles from n-octyl triethoxy silane

Ormosil (organically modified silane) such as n-octyl triethoxy silane has been found to aggregate in the form of normal micelles as well as reverse micelles in which the triethoxy silane moeities are hydrolyzed to form a hydrated silica network while the n-octyl groups are held together through hydrophobic interaction. These nanoparticles are spherical in shape and are nearly monodispersed with an average diameter of below 100 nm. The nanoparticles originating from the micellar aggregate have an hydrophobic core with a layer of the hydrated silica network at the surface. The hydrophobic core can host hydrophobic molecules such as tetraphenyl porphyrin, which is leached out of the particles extremely slowly compared to that in Triton X-100 micelles. The nanoparticles originating from the reverse micelles have a hydrated silica network in the core surrounded by the hydrophobic n-octyl chains on the particle surface. The hydrophilic silica cores of these nanoparticles have been used to encapsulate horseradish peroxidase (HRP) and the enzyme shows its activity and follows Michaelis-Menten kinetics.     

Gas chromatographic determination of nitrite in water by precolumn formation of 2-phenylphenol with flame ionization detection

Nitrite can be determined by its reaction with 2-aminobiphenyl in acidic medium to produce 2-phenylphenol which is quantified by gas chromatography with flame ionisation detection using biphenyl as an internal standard. The hydrolysis of the intermediate diazonium ion avoids many of the problems encountered in the conventional determination of nitrite by the diazotization of an aromatic amine (usually sulphanilamide) and coupling with N-(1-napthyl)ethylenediamine dihydrochloride to yield an azo dye followed by spectrophotometry. Unlike this method, the proposed reaction is rapid and does not suffer from interferences by copper(II), iron(III) and lead(II). The calibration graph was linear over the range 5–1000 μg/l NO₂-N and the limit of detection found to be 0.5 μg/l NO₂-N. A single analysis can be completed within 20 min. The method was not affected by coloured or turbid analyte solutions and has been used to determine nitrite in natural waters.     

Rational designing of glyco-nanovehicles to target cellular heterogeneity

The aberrant expression of endocytic epidermal growth factor receptors (EGFRs) in cancer cells has emerged as a key target for therapeutic intervention. Here, we describe for the first time a state-of-the-art design for a heparan sulfate (HS) oligosaccharide-based nanovehicle to target EGFR-overexpressed cancer cells in cellular heterogeneity. An ELISA plate IC₅₀ inhibition assay and surface plasma resonance (SPR) binding assay of structurally well-defined HS oligosaccharides showed that 6-O-sulfation (6-O-S) and 6-O-phosphorylation (6-O-P) of HS tetrasaccharides significantly enhanced EGFR cognate growth factor binding. The conjugation of these HS ligands to multivalent fluorescent gold nanoparticles (AuNPs) enabled the specific and efficient targeting of EGFR-overexpressed cancer cells. In addition, this heparinoid-nanovehicle exhibited selective homing to NPs in cancer cells in three-dimensional (3D) coculture spheroids, thus providing a novel target for cancer therapy and diagnostics in the tumor microenvironment (TME).

Heparan sulfate oligosaccharide based nanovehicle greatly enhance the selective targeting of cancer cells in tumor microenvironment.     

Europium luminescence of EF-hand helix-turn-helix chimeras: impact of pH and DNA-binding on europium coordination

A series of Eu(III) metallopeptides, designed on the basis of the structural similarity of the helix-turn-helix and EF-hand motifs, have been studied by Eu(III) (7)F(0) --> (5)D(0) excitation spectroscopy. The impact of EF-hand ligand set differences on the hydration number and Eu(III) coordination environment are compared among the peptides. The conditional binding affinities were determined by Eu titration (P3, log K(a) = 6.0 +/- 0.4; P3W, log K(a) = 5.9 +/- 0.2; P5b, log K(a) = 5.3 +/- 0.1). Two similar coordination environments occur in each case, consistent with structural flexibility about the metal site. The coordination environments are consistent with 8- or 9-coordinate Eu(III), including six peptide-based ligands and two to three water molecules (P3, q = 1.9 +/- 0.2; P3W, q = 2.3 +/- 0.2; P4a, q = 1.9 +/- 0.3; P5b, q = 2.6 +/- 0.2). The Eu(III) (7)F(0) --> (5)D(0) excitation spectra are pH-dependent, as reported for several EF-hand proteins (oncomodulin, parvalbumin). A higher energy transition occurs at pH > 6, and has been assigned to deprotonation of coordinated water. The pK(a) leading to this new transition is dependent on Eu(III) Lewis acidity, which varies with the inner and outer sphere ligand set. The noncoordinating ninth position of the Eu-binding loop, which is poised to make second-sphere contacts to the coordinated water, stabilizes the deprotonated form of the coordinated solvent more effectively when it is Thr (P5b) than Asp (P3W). Upon DNA-binding by the metallopeptides, the pK(a) of the pH-dependent peak increases, but no new DNA-dependent transitions are observed. This indicates no DNA-based Eu(III) ligands are introduced, such as phosphate oxygen atoms of the DNA backbone. The hydration number decreases in the presence of DNA (P3W + DNA, q = 1.9 +/- 0.2; P5b + DNA, q = 1.7 +/- 0.2), indicating that DNA-binding by the metallopeptides organizes rather than compromises the Eu-binding site within the peptide.