Sensitive determination of hydrazine using poly(phenolphthalein), Au nanoparticles and multiwalled carbon nanotubes modified glassy carbon electrode

This study reports a detailed analysis of an electrode material containing poly(phenolphthalein), carbon nanotubes and gold nanoparticles which shows superior catalytic effect towards to hydrazine oxidation in Britton–Robinson buffer (pH 10.0). Glassy carbon electrode was modified by electropolymerization of phenolphthalein (PP) monomer (poly(PP)/GCE) and the multiwalled carbon nanotubes (MWCNTs) was dropped on the surface. This modified surface was electrodeposited with gold nanoparticles (AuNPs/CNT/poly(PP)/GCE). The fabricated electrode was analysed the determination of hydrazine using cyclic voltammetry, linear sweep voltammetry and amperometry. The peak potential of hydrazine oxidation on bare GCE, poly(PP)/GCE, CNT/GCE, CNT/poly(PP)/GCE, and AuNPs/CNT/poly(PP)/GCE were observed at 596 mV, 342 mV, 320 mV, 313 mV, and 27 mV, respectively. A shift in the overpotential to more negative direction and an enhancement in the peak current indicated that the AuNPs/CNT/poly(PP)/GC electrode presented an efficient electrocatalytic activity toward oxidation of hydrazine. Modified electrodes were characterized with High-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Amperometric current responses in the low hydrazine concentration range of 0.25–13 µM at the AuNPs/CNT/poly(PP)/GCE. The limit of detection (LOD) value was obtained to be 0.083 µM. A modified electrode was applied to naturel samples for hydrazine determination.     

Non-resonant microwave absorption studies of superconducting MgB2 and MgB2 + MgO

Non-resonant microwave absorption (NRMA) studies of superconducting MgB₂ and a sample containing ∼10% by weight of MgO in MgB₂ are reported. The NRMA results indicate near absence of intergranular weak links in the pure MgB₂ sample. A linear temperature dependence of the lower critical field H _c1 is observed indicating a non-s wave superconductivity. However, the phase reversal of the NRMA signal which could suggest d wave symmetry is also not observed. In the MgB₂ + MgO sample, much larger low field dependent absorption is observed indicating the presence of intergranular weak links. The hysteretic behavior of NRMA is compared and contrasted in the two samples. In the pure MgB₂ sample, a large hysteresis is observed between the forward and the reverse scans of the magnetic field indicating strong pinning of flux lines. This hysteresis saturates a few degrees below T _c while in the MgB₂ + MgO sample, a much slower increase of hysteresis with decreasing temperature is observed, a signature of weaker pinning.     

SYNTHESIS AND CHARACTERIZATION OF HYBRID PROTON CONDUCTING MEMBRANES OF POLY（VINYL ALCOHOL） AND PHOSPHOMOLYBDIC ACID

Hybrid proton conducting membranes of poly（vinyl alcohol） （PVA） and phosphomolybdic acid （PMA） were prepared by solution casting method. The effect of PMA doping and PVA crosslinking density on the membrane properties and proton conductivity were investigated. The crosslinking reaction between the hydroxyl group of PVA and the aldehyde group of glutaraldehyde （GA） was characterized by IR spectroscopy. Proton conductivity of the membranes increases with an increase in concentration of the doped PMA and also with an increase in crosslinking density of the membranes. Proton conductivity results indicate that a significant amount of PMA was maintained in the membranes even after several hours of immersion in water. A maximum conductivity of 0.0101 S cm^-1 was obtained for the membrane with 33.3 wt% PMA and crosslinking density of 5.825 mol%. X-ray diffraction studies were carried out to investigate the influence of PMA doping and crosslinking density on the nature of the membranes. These properties make them very good candidates for polymer electrolyte membranes for direct methanol fuel cell application.     

The Performance of an Electrorheological Fluid in Dynamic Squeeze Flow: The Influence of Solid Phase Size

This paper is concerned with an experimental investigation of a comparison of the rheological performance of an ER fluid, consisting of a carrier with a range of solid phase sizes, in oscillatory squeeze-flow under DC conditions. The fluid is sandwiched between two parallel plane electrodes, the upper one stationary and the lower one oscillating normal to its plane. It is seen that the dynamic performance of the fluid, in terms of the capacity for the transmission of imposed forces across the fluid, is highly dependent on the size of the dispersed solid phase and has an optimum value which is dependent on the mean value of the interelectrode gap. In addition the paper includes some measurements of the current through the fluid which may help to shed some further light on the mechanism of the ER effect. Finally the implications of the results to vibration control are discussed. Copyright 1999 Academic Press.     

Ultrasonic study of molecular interaction in binary liquid mixtures at 30°C

Densities ρ and ultrasonic speeds u of the binary mixtures of tetrahydrofuran (THF) with 1-butanol and tert-butanol, at 30°C, over the entire composition range were measured. From these data isentropic compressibility, K _s, intermolecular free length L _f, relative association R _A, acoustic impedance Z, molar sound speed R _m, deviations in isentropic compressibility ΔK _s, and excess volume V ^E were calculated. The variation of these parameters with composition of the mixture helps us in understanding the nature and extent of interaction between unlike molecules in the mixtures. Further, theoretical values of ultrasonic speed were evaluated using theories and empirical relations. The relative merits of these theories and relations were discussed.     

Rheology of semi-dilute solutions of calf-thymus DNA

We study the rheology of semi-dilute solutions of the sodium salt of calf-thymus DNA in the linear and nonlinear regimes. The frequency response data can be fitted very well to the hybrid model with two dominant relaxation times τ₀ and τ₁. The ratio (τ₀/τ₁) ∼5 is seen to be fairly constant on changing the temperature from 20 to 30°C. The shear rate dependence of viscosity can be fitted to the Carreau model.     

Measurement of the ground state 2n pickup probability for 28Si+68Zn and its role in sub-barrier fusion enhancement

The ground state and excited state transfer yields for the 2-neutron pickup channel in the ²⁸Si+⁶⁸Zn system have been measured explicitly. The recoil mass separator at the nuclear Science Centre, New Delhi was used for the measurement. A NaI(T1) detector was used for detecting the deexcitation γ’s from the transfer products. The kinematic coincidence technique was employed for the transfer measurement. Simplified coupled channels calculations show that out of all transfer channels the major contribution to the sub-barrier enhancement comes from the ground state 2 neutron pickup channel with a ground state Q-value of+1.83 MeV.