Aerosol‐Assisted Synthesis of Porous TiNxOy@C Nanocomposites

Porous TiN_xO_y‐based particles were synthesized by an aerosol spray process. At first, the starting sol solution containing the metal precursor and the nitrogen source is sprayed to form an aerosol that is subsequently pyrolysed at different temperatures. The obtained dried particles are an amorphous coordination “polymer” rich in carbon and nitrogen. These “glassy” particles are finally thermally treated at 800 °C, promoting the crystallization of the particles and the release of a major part of the carbon. As the particles keep their original shape, carbon loss and density increase during the crystallization step and lead to the development of an accessible pore structure. The process was analyzed and extended to the synthesis of other metal nitrides, such as VN and W₂N, thereby showing its general validity for the production of functional nanocrystalline nitride ceramics with high porosity still occupying a relatively small volume, and otherwise not easily accessible.     

Small-angle neutron scattering of mixed ionic perfluoropolyether micellar solutions

Aqueous mixed micellar solutions of perfluoropolyether carboxylic salts with ammonium counterions have been studied by small-angle neutron scattering. Two surfactants differing in the tail length were mixed in proportions n2/n3 = 60/40 w/w, where n2 and n3 are the surfactants with two and three perfluoroisopropoxy units in the tail, respectively. The tails are chlorine-terminated. The mixed micellar solutions, in the concentration range 0.1-0.2 M and thermal interval 20-40 degrees C, show structural characteristics of the interfacial shell that are very similar to ammonium n2 micellar solutions previously investigated; thus, the physics of the interfacial region is dominated by the polar head and counterion. The shape and dimensions of the micelles are influenced by the presence of the n3 surfactant, whose chain length in the micelle is 2 A longer than that of the n2 surfactant. The n3 surfactant favors the ellipsoidal shape in the concentration range 0.1-0.2 M with a 1/2 ionization degree of n2 micelles. The very low surface charge of the mixed micelles is attributed to the increase in hydrophobic interactions between the surfactant tails, due to the longer n3 surfactant molecules in micelles. The closer packing of the tails decreases the micellar curvature and the repulsions between the polar heads, by surface charge neutralization of counterions migrating from the Gouy-Chapman diffuse layer, leading to micellar growth in ellipsoids with greater axial ratios.     

Neural Network Inference of Molar Mass Distributions of Peptides during Tailor-Made Enzymatic Hydrolysis of Cheese Whey: Effects of pH and Temperature

The fine-tuning of the enzymatic hydrolysis of proteins may provide a pool of peptides with predefined molar mass distributions. However, the complex mixture of molecules (peptides and amino acids) that results after the proteolysis of cheese whey turns unfeasible the assessment of individual species. In this work, a hybrid kinetic model for the proteolysis of whey by alcalase, multipoint-immobilized on agarose, is presented, which takes into account the influence of pH (8.0-10.4) and temperature (40-55 degrees C) on the activity of the enzyme. Five ranges of peptides' molar mass have their reaction rates predicted by neural networks (NNs). The output of NNs trained for constant pH and temperatures was interpolated, instead of including these variables in the input vector of a larger NN. Thus, the model complexity was reduced. Coupled to differential mass balances, this hybrid model can be employed for the online inference of peptides' molar mass distributions. Experimental kinetic assays were carried out using a pH-stat, in a laboratory-scale (0.03 L) batch reactor. The neural-kinetic model was integrated to a supervisory system of a bench-scale continually stirred tank reactor (0.5 L), providing accurate predictions during validation tests.     

Turbulence in microfluidics: Cleanroom-free,fast, solventless,and bondless fabrication and application in high throughput liquid-liquid extraction

This paper addresses an important breakthrough in the deployment of ultra-high adhesion strength microfluidic technologies to provide turbulence at harsh flow rate conditions. This paper is only, to our knowledge, the second reporting on the generation of high flow rate-assisted turbulence in microchannels. This flow solves a crucial bottleneck in microfluidics: the generation of high throughput homogeneous mixings. We focused on the fabrication of bulky polydimethylsiloxane (PDMS) microchips (without any interfaces) rather than the laborious surface modifications that were employed in the first reporting about turbulence-assisted microfluidics. The fabrication is cleanroom-free, simple, low-cost, fast, solventless, and bondless requiring only a laboratory oven. More specifically, our method relies on the shaping of a nylon scaffold, cure of PDMS with embedded nylon, and removal of this scaffold. The scaffold was obtained by manually wrapping nylon threads. The withdrawing out of the scaffold was completed in few seconds using only a plier. Such microchannels endured flow rates of up to 60.0 mL min⁻¹ with a strikingly low elastic deformation. The importance in producing turbulence into microscale channels was successfully shown in liquid-liquid extractions. The great energy dissipation rate relative to the turbulence created high throughput and efficient extractions in microfluidics for the first time. The residence time was only 0.01 s at 25.0 mL min⁻¹ (total flow rate of the immiscible phases). In addition, the partition coefficient determined in a single run was similar to that obtained by the conventional batch shake-flask method that was realized in triplicate.     

Attempted Oxidative Deamination of N-Deacetylcolchicinoids with 3,5-Di(tert-butyl)-1,2-benzoquinone: Synthesis of 2H-1,4-Benzoxazine-Type Adducts

In an attempt to use 3,5-di(tert-butyl)-1,2-benzoquinone for the oxidative deamination of N-deacetylcolchicine ( 4 ) and N-deacetylthiocolchicine (=N-deacetyl-10-demethoxy-10-(methylthio)colchicine; 5 ) to give the corresponding ketones 2 and 3 , the 2H-1,4-benzoxazine-type adducts 8 / 9 and 11 / 12 , respectively, were formed instead, showing a new and unexpected behavior of Corey's reagent. The adducts were separated and spectroscopically characterized, and a plausible scheme of formation is reported.     

Cluster and periodic DFT calculations of MgO/Pd(CO) and MgO/Pd(CO)(2) surface complexes

The bonding and vibrational properties of Pd(CO) and Pd(CO)(2) complexes formed at the (100) surface of MgO have been investigated using the gradient-corrected DFT approach and have been compared to the results of infrared and thermal desorption experiments performed on ultrathin MgO films. Two complementary approaches have been used for the calculation of the electronic properties: the embedded cluster method using localized atomic orbital basis sets and supercell periodic calculations using plane waves. The results show that the two methods provide very similar answers, provided that sufficiently large supercells are used. Various regular and defect adsorption sites for the Pd(CO) and Pd(CO)(2) have been considered: terraces, steps, neutral and charged oxygen vacancies (F and F(+) centers), and divacancies. From the comparison of the computed and experimental results, it is concluded that the most likely site where the Pd atoms are stabilized and where carbonyl complexes are formed are the F(+) centers, paramagnetic defects consisting of a single electron trapped in an anion vacancy.     

Polyphenolic Composition and Antioxidant Activity (ORAC,EPR and Cellular) of Different Extracts of Argylia radiata Vitroplants and Natural Roots

Plant biochemistry studies have increased in recent years due to their potential to improve human health. Argylia radiata is an extremophile plant with an interesting polyphenolic profile. However, its biomass is scarce and occasionally available. Argylia in vitro biomass was obtained from tissue culture and compared with in vivo roots regarding its polyphenolic and flavonoid content. Different solvents were used to prepare extracts from the in vitro tissue of callus and aerial plant organs and in vivo roots. UPLC-MS/MS was used to assess the chemical composition of each extract. ORAC-FL and scavenging of free radicals (DPPH and OH) methods were used to determine the antioxidant capacity of extracts. Furthermore, the biological activity of the extracts was established using the cellular antioxidant activity method. The vitroplants were a good source of polyphenols (25–68 mg GAE/100 g tissue FW), and methanol was the most efficient solvent. Eight polyphenolic compounds were identified, and their antioxidant properties were investigated by different chemical methods with EPR demonstrating its specific scavenging activity against free radicals. All extracts showed cellular dose-dependent antioxidant activity. The methanolic extract of vitroplants showed the highest cellular antioxidant activity (44.6% and 51%) at 1 and 10 µg/mL of extract, respectively. Vitroplants of A. radiata are proposed as a biotechnological product as a source of antioxidant compounds with multiple applications.     

Copper and iron interactions with angiotensin-converting enzyme inhibitors. A study by fast-atom bombardment tandem mass spectrometry

Fast atom bombardment, combined with high-energy collision-induced tandem mass spectrometry, has been used to investigate gas-phase metal-ion interactions with captopril, enalaprilat and lisinopril, all angiotensin-converting enzyme inhibitors.Suggestions for the location of metal-binding sites are presented. For captopril, metal binding occurs most likely at both the sulphur and the nitrogen atom. For enalaprilat and lisinopril, binding preferably occurs at the amine nitrogen. Copyright 1999 John Wiley & Sons, Ltd.     

Pulsed X-ray diode with a long-lifetime plasma cathode

6 shots, the X-ray dose, uniformity, and ionisation rate values guarantee an effective preionisation of excimer laser discharges. Owing to both the long lifetime and the substantial absence of maintenance, this X-ray diode seems suitable to preionise commercial gas lasers, such as excimer and TEA CO₂ lasers. Received: 28 August 1998 / Revised version: 16 November 1998 / Published online: 24 February 1999