In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.     

一种新的空间域图像错误掩盖方法

提出了空间域图像错误掩盖方法.在信道丢包率较高时,采用场编码交织技术将图像按像素行分为两个场,并分别独立编码和传输.当某个场中的图像数据在网络传输过程中丢失时,用相邻场的像素值通过插值的方法恢复丢失数据.实验结果表明,掩盖效果明显优于现有的空间域错误掩盖方法,即使在图像数据丢失一半的情况下,恢复图像主观上仍可接受,测试图像的PSNR增益可达2.77~7.24 dB.     

电容应变式压力传感器原理及检测电路设计

论述了电容应变式压力传感器的原理，给出了一种电容应变式压力传感器的电路，并分析了压力大小与电路输出电压之间的关系。     

Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

光晶格中双组分玻色-爱因斯坦凝聚系统的调制不稳定性

利用线性稳定分析的方法,在不满足原子流相等的条件下,对光晶格中双组分玻色-爱因斯坦凝聚原子(BEC)系统的调制不稳定性区域与不同BEC组分的波长和不同的调制波长,以及两组分BEC间相互作用大小之间的关系进行了研究.结果显示,光晶格中双组分BEC系统的调制稳定性的区域在不满足原子流相等的条件下,随不同的波长,不同的调制和相互作用之间的大小会出现了较大的变化.相应结果可为实际应用中如何操控双组分BEC提供有用的信息.     

Broadband spin‐controlled focusing via logarithmic‐spiral nanoslits of varying width

This work presents analytical, numerical and experimental demonstrations of light diffracted through a logarithmic spiral (LS) nanoslit, which forms a type of switchable and focus‐tunable structure. Owing to a strong dependence on the incident photon spin, the proposed LS‐nanoslit converges incoming light of opposite handedness (to that of the LS‐nanoslit) into a confined subwavelength spot, while it shapes light with similar chirality into a donut‐like intensity profile. Benefitting from the varying width of the LS‐nanoslit, different incident wavelengths interfere constructively at different positions, i.e., the focal length shifts from 7.5 μm (at λ = 632.8 nm) to 10 μm (at λ = 488 nm), which opens up new opportunities for tuning and spatially separating broadband light at the micrometer scale.

     

一种用于电子纸的电泳液的显示性能研究

用有机颜料汉沙黄(P.Y.3)、苏丹黑和合适的稳定剂为原料配制了一种性能稳定的电泳显示液.分析了此电泳显示液中颜料微粒的带电机理及其影响因素,研究了在改变电压方向时反射光谱与吸收光谱的变化及其原因,光谱分析结果表明体系中存在的各种吸附使显示效果受到局限,反射谱与吸收谱的变化在表征器件的显示特性时呈现出一致性,器件的反射光强和反射率在不同波长上有区域选择性,同时对比度也有区域选择性,这决定了在监测器件的响应时应选择的波长范围以及可利用的光源.兼顾灵敏性和测试信号强度的需求,选用峰值波长为470 nm的蓝光二极管为光源,电泳槽的厚度为0.2 mm,用荧光光谱仪监测相同周期不同幅值脉冲电压作用下颜料微粒在493 nm波长处的反射光强的变化,并由示波器记录并输出反射光强随驱动电压的变化,还结合相关理论讨论了驱动电压对器件的反射光强和对比度的影响.     

双参数形变谐振子湮没算符高次幂本征态的量子统计性质

研究双参数形变谐振子湮没算符高次幂本征态的量子统计特性. 结果表明, 当k为偶数时它们都可存在N次方压缩; 并且它们均可呈现反聚束效应.     

蜡烛火焰三维温度场重建实验研究

本文在实验室中以蜡烛火焰为研究对象,研究采用辐射图像处理技术重建蜡烛三维温度场。并采用细丝热电偶实测火焰局部温度,对蜡烛火焰三维温度场可视化的结果进行了比较。结果表明,火焰高温区的重建温度是合理的,此方法能够很好地重建单峰、双峰三维温度分布。进一步证实了基于火焰图像处理技术实现三维温度场可视化的可行性。     

超细激光束准直器设计的新数学模型

为了获取长距离超细激光束，采用几何能量守恒法设计出一种衍射光学元件，推导出高斯光入射时衍射光学元件位相函数。根据建立的数学模型，设计超细激光束准直器，并模拟高斯光入射时出射激光束的光斑形状及光强分布，最后计算了能量利用率。