Optimization of control setting and size of shunt capacitors on distribution feeders

Loads on electric utility systems have two components: active power (measured in kilowatts) and reactive power (measured in kilovars). Active power has to be generated at the power plant, whereas reactive power can be provided by either power plants or capacitors. It is a well-known fact that shunt power capacitors are the most economical source to meet the reactive power requirements of inductive loads and transmission lines operating at a lagging power factor.This paper describes new contributions to the problem of optimization of size and control setting of shunt capacitors on distribution feeders, so that the losses along the feeder are minimized. The variation of the KVAR of the load on the feeder with the distance from the substation is assumed to be linear. The parameters of this function are estimated from the available KVAR loading on the feeder first by using least-square techniques and then by using least-absolute-value parameter estimation techniques. The results obtained are compared with that obtained if the current profile is assumed to be uniformly distributed on the feeder. Our results show that the optimum size of the capacitor bank as well as its optimum location depend on the parameters of the model used for the load. Also, our results show a large saving in the size of the capacitor banks used with a considerable per-unit-loss reduction along the feeder.This work was supported by the National Science and Engineering Research Council of Canada, Grant No. A4146. The first author acknowledges the help received from Engineer Samy Soliman for reviewing all the mathematical expressions in this paper.     

Synthesis and comparative solution properties of single‐, twin‐, and triple‐tailed associating ionic polymers based on diallylammonium salts

The cycloterpolymerizations of single‐, twin‐, and triple‐tailed hydrophobes with hydrophilic monomer N,N‐diallyl‐N‐carboethoxymethylammonium chloride and sulfur dioxide afforded a series of cationic polyelectrolytes (CPEs) in excellent yields. These CPEs, upon the acidic hydrolysis of the pendent ester groups, gave the corresponding pH‐responsive cationic acid salts, which, upon a treatment with sodium hydroxide, were converted to polybetaines (PBs), anionic polyelectrolytes (APEs), and PB/APE polymers containing various proportions of zwitterionic (PB) and anionic fractions (APE) in the polymer chain. At a shear rate of 0.36 s⁻¹ at 30 °C, salt‐free water solutions of the CPEs (2 g/dL) containing 8, 4, and 2.67 mol % of the single‐, twin‐, and triple‐tailed hydrophobes (all having 8 mol % octyloxy tails) had apparent viscosity values of 70, 2800, and 396,000 cps, respectively. The PB/APE polymer with a ratio of 33:67 for the zwitterionic and anionic fractions in the polymer chain gave the highest viscosity value. The superior viscosity behavior of the polymers containing the triple‐tailed hydrophobe was attributed to the blocky nature of the comonomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5480–5494, 2006     

Antenna behavior of donor–acceptor dye‐loaded novel supramolecular framework hosts

New guest dye cations within the channel cavities of supramolecular hosts are studied. The guest organic dyes are intercalated in the supramolecular hosts by a coprecipitation reaction to give new dye‐sensitizer coordination polymers. The absorption spectra for the dye molecules within the supramolecular hosts show intense bands in the region from 500 to 700 nm due to the presence of the dyes within the parallel channels in the monomeric forms. The properties of the resulting colored polymers were investigated by IR, UV–vis, fluorescence spectra and X‐ray powder diffraction, indicating the excitation energy transfer from neutral red or pyronine as donors to methylene blue or thionine as acceptors within a supramolecular system filled with a mixture of both dyes. The wide‐ranging tenability of these highly organized materials offers fascinating new possibilities for exploring excitation energy transfer phenomena, and challenges for developing new photonic devices. Copyright © 2005 John Wiley & Sons, Ltd.     

Crystal and molecular structure of triphenylarsine

Triphenylarsine crystallizes in the triclinic space groupP¯1 (No. 2),a=11.200(2),b=15.263(7),c=17.871(6) Å,=84.63(5),=80.21(5), =86.41(6)°,Z=8, with four molecules in the asymmetric unit. The structure was solved by direct methods and refined in the initial stages by full-matrix least squares and finally by block-diagonal least-squares methods toR=0.055 for 3537 reflections. The dimensions and the conformations of the four independent molecules are almost identical. The molecules do not exhibitC _3v symmetry.     

Synthesis,Crystal Structure,Ab Initio Studies and Fingerprint Plots of 2-Chloro-1,3-dioxo-2,3-dihydro-1H-inden-2-yl acetate

Abstract  

2-Chloro-1,3-dioxo-2,3-dihydro-1H-inden-2-yl acetate, C₁₁H₇ClO₄ (Fig. 1), has been synthesized and the structure has been solved by IR and X-ray diffraction studies. The crystals are triclinic, space group P [`1] \bar{1} , with a = 7.62060(10) ?, b = 11.5944(2) ?, c = 13.0753(3) ?, α = 97.2820(10)°, β = 101.5740(10)°, γ = 101.7930(10)°, Mr = 238.62, V = 1090.82(3) ?³, Z = 4 and R = 0.0557. In the title compound there are two molecules in the asymmetric unit. The molecules are linked via weak C–H···O hydrogen bonds forming R₄⁴(28) rings. The intermolecular interactions were analysed by means of the fingerprint plots derived from the Hirshfeld surfaces. The fingerprint plots evidenced subtle differences in the intermolecular contacts for the two independent molecules.      

Ab initio calculation of vibrational frequencies of GexPxS1−2x glass

The vibrational frequencies of GeS₄, GeP₄, Ge₂S₆, GeP₃, Ge₃P, Ge₂P₂, P₂S₂, P₃S, P₄S₃, α-P₄S₄, β-P₄S₄, α-P₄S₅, β-P₄S₅, P₄S₇, P₄S₉ and P₄S₁₀ are theoretically computed from the first principles. The Raman frequencies of Ge_xP_xS_1−2x glass are obtained for x varying from 0.05 to 0.019. The computed fundamental frequencies of clusters are compared with those experimentally found. In this way, we are able to identify the vibrating clusters in the real glass. The clusters identified in the real glass are found to be Ge₂P₂, P₄S₃, α-P₄S₄, β-P₄S₄, β-P₄S₅, P₄S₇, P₄S₉, β-P₄S₅, Ge₂S₆, Ge₃P.     

Enhanced physical and chemical adsorption of carbon dioxide using bimetallic copper–magnesium oxide/carbon nanocomposite

Mixed Cu and Mg oxides on nitrogen-rich activated carbon (AC) from Nypha fruticans biomass were characterized and their CO₂ adsorption performance was measured. Highly dispersed CuO and MgO nanoparticles on AC was obtained using an ultrasonic-assisted impregnation method. The optimum adsorbent is 5%CuO–25%MgO/AC having good surface properties of high surface area, pores volume and low particles agglomeration. The higher content of MgO of 5%CuO–25%MgO/AC adsorbent contributes to less metal carbide formation which increases their porosity, surface area and surface basicity. XPS analysis showed some amount of nitrogen content on the surface of the adsorbent which increased their surface basicity towards selective CO₂ adsorption. The presence of moisture accelerated the CO₂ chemisorption to form a hydroxyl layer on the surfaces. The 5%CuO–25%MgO/AC adsorbent successfully adsorbed CO₂ via physisorption and chemisorption of 14.8 and 36.2 wt%, respectively. It was significantly higher than fresh AC with better selectivity to CO₂.     

Novel Thorium Membrane Sensors with Anionic Response Based on Trioctylphosphine Oxide and Toluate Ionophores

Two novel potentiometric polymeric membrane sensors for rapid and accurate determination of thorium are described. These are based on the use of trioctylphosphine oxide (TOPO) and thorium toluate (Th‐TA) as ionophores dispersed in poly(vinyl chloride) matrix membranes plasticized with nitrophenyloctyl ether. In strong nitric acid medium, Th(IV) nitrate is converted into [Th(NO₃)₆]^2? complex and sensed as anionic divalent ion which exclude most cationic effect. Validation of the assay methods using the quality assurance standards (linearity range, accuracy, precision, within‐day variability, between‐day‐repeatability, lower detection limit and sensitivity) reveals excellent performance characteristics of both sensors. The sensors exhibit near‐Nernstian response for 1.0×10^?6–1.0×10^?1 M Th over the pH range 2.5–4.5. Calibration slopes of ?32.3±0.3 and ?27.2±0.2 mV/decade, precision of ±0.5 and ±0.8% and accuracy of 98.8±0.9 and 97.9±0.7% are obtained with TOPO and Th‐TA based sensors, respectively. Negligible interferences are caused by most interfering mono‐, di‐, tri‐, tetra‐, penta‐, and hexa‐valent elements commonly associated with thorium in naturally occurring minerals and ores. High concentrations of Cl^?, F^?, SO₄^2?, and NO₃^? ions have no diverse effect. Complete removal of the effect of the interferents in complex matrices is achieved by retention of [Th(NO₃)₆]^2? complex from 5 M nitric acid/methanol mixture (1 : 9 v/v) on a strong anion exchanger, washing out the cationic interferents followed by stripping off thorium anion complex and measurements. Both sensors are used for determining thorium in certified thorium ore samples (20–120 mg Th/kg) and some naturally occurring ores (200–600 mg Th/kg). The results obtained agree fairly well with the certified labeled values or the data obtained using X‐ray fluorescence spectrometry     

Phenylethyl Glycosides from Globularia alypum Growing in Turkey

From the leaves of Globularia alypum, three new phenylethyl glycosides, namely galypumosides A (=2‐(3,4‐dihydroxyphenyl)ethyl O‐α‐rhamnopyranosyl‐(1→3)‐4‐O‐[(E)‐caffeoyl]‐6‐O‐[(E)‐p‐coumaroyl]‐β‐glucopyranoside; 1 ), B (=2‐(3,4‐dihydroxyphenyl)ethyl O‐α‐rhamnopyranosyl‐(1→3)‐4‐O‐[(E)‐caffeoyl]‐6‐O‐[(E)‐feruloyl]‐β‐glucopyranoside; 2 ), and C (=2‐(3,4‐dihydroxyphenyl)ethyl O‐α‐rhamnopyranosyl‐(1→3)‐4‐O‐[(E)‐caffeoyl]‐6‐O‐menthiafoloyl‐β‐glucopyranoside; 3 ), were isolated, together with two known phenylethyl glycosides, calceolarioside A and verbascoside. Eight iridoid glucosides, catalpol, globularicisin, globularin, globularidin, globularinin, globularimin, lytanthosalin, and alpinoside, a flavon glycoside, 6‐hydroxyluteolin 7‐O‐sophoroside, a lignan glycoside, syringaresinol 4′‐O‐β‐glucopyranoside, and a phenylpropanoid glycoside, syringin, were also obtained and characterized. The structures of the isolates were elucidated on the basis of 1D‐ and 2D‐NMR experiments as well as HR‐MALDI‐MS.