Creeping flow analysis of slightly non-Newtonian fluid in a uniformly porous slit

This paper provides the analysis of the steady, creeping flow of a special class of slightly viscoelastic, incompressible fluid through a slit having porous walls with uniform porosity. The governing two dimensional flow equations along with non-homogeneous boundary conditions are non-dimensionalized. Recursive approach is used to solve the resulting equations. Expressions for stream function, velocity components, volumetric flow rate, pressure distribution, shear and normal stresses in general and on the walls of the slit, fractional absorption and leakage flux are derived. Points of maximum velocity components are also identified. A graphical study is carried out to show the effect of porosity and non-Newtonian parameter on above mentioned resulting expressions. It is observed that axial velocity of the fluid decreases with the increase in porosity and non-Newtonian parameter. The outcome of this theoretical study has significant importance both in industry and biosciences.     

Organometallic assembling of chitosan‐Iron oxide nanoparticles with their antifungal evaluation against Rhizopus oryzae

The ever‐increasing resistance of plant microbes towards fungicides and bactericides has been causing serious threat to plant production in recent years. For the development of an effective antifungal agent, we introduce a novel hydrothermal protocol for synthesis of chitosan iron oxide nanoparticles (CH‐Fe₂O₃ NPs) using acetate buffer of low pH 5.0 for intermolecular interaction of Fe₂O₃ NPs and CH. The composite structure and elemental elucidation were carried out by using X‐ray power diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X‐ray (EDX), Transmission Electron Microscopy (TEM), Fourier Transformed Infrared Spectroscopy (FTIR) and Ultraviolet Visible Absorption Spectroscopy (UV–vis spectroscopy). Additionally, antifungal activity was evaluated both In vitro and In vivo against Rhizopus oryzae which is causing fruit rot disease of strawberry. We compared different concentrations (0.25%, 0.50%, 075% and 1%) of CH‐Fe₂O₃ NPs and 50% synthetic fungicide (Matalyxal Mancozab) to figure out suitable concentration for application in the field. XRD analysis showed a high crystalline nature of the NPs with average size of 52 nanometer (nm). SEM images revealed spherical shape with size range of 50–70 nm, whereas, TEM also revealed spherical shape, size ranging from 0 nm to 80 nm. EDX and FTIR results revealed presence of CH on surface of Fe₂O₃ NPs. The band gap measurement showed peak 317–318 nm for bare Fe₂O₃ NPs and CH‐Fe₂O₃ NPs respectively. Antifungal activity in both In vitro and In vivo significantly increased with increase in concentration. The overall results revealed high synergetic antifungal potential of organometallic CH‐Fe₂O₃ NPs against Rhizopus oryzae and suggest the use of CH‐Fe₂O₃ NPs against other Phyto‐pathological diseases due to biodegradable nature.     

MOFs for desulfurization of fuel oil: Recent advances and future insights

Nowadays, desulfurization of fuel oil has raised concern globally because of strict industrial and environmental legislations. Albeit hydrodesulfurization (HDS) has been extensively used in oil refineries to produce low sulfur oil (< 10 ppm) but not been proven as effective method for the removal of dibenzothiophene (DBT), benzothiophene (TH) and their derivatives. Subsequently, adsorptive desulfurization (ADS) and oxidative desulfurization (ODS) methods have been developed to achieve high removal efficiency. In the past decade, metal–organic frameworks (MOFs) and its composites as oxidative catalysts, as well as adsorbents, have attracted the researchers owing to high surface area, tunable properties, and reusable. The present review comprises use of MOFs and their composites for the removal of sulfur from fuel oil via ODS and ADS processes. Additionally, physicochemical properties of MOFs, mechanism, pros and cons of both process, regeneration, and future challenges have been discussed briefly. Moreover, current limitations and future prospective are also discussed.     

Investigating direct current potentials that affect native protein conformation during trapped ion mobility spectrometry–mass spectrometry

Trapped ion mobility spectrometry–time-of-flight mass spectrometry (TIMS-TOFMS) has emerged as a tool to study protein conformational states. In TIMS, gas-phase ions are guided across the IM stages by applying direct current (DC) potentials (D1–6), which, however, might induce changes in protein structures through collisional activation. To define conditions for native protein analysis, we evaluated the influence of these DC potentials using the metalloenzyme bovine carbonic anhydrase (BCA) as primary test compound. The variation of DC potentials did not change BCA-ion charge and heme content but affected (relative) charge-state intensities and adduct retention. Constructed extracted-ion mobilograms and corresponding collisional cross-section (CCS) profiles gave useful insights in (alterations of) protein conformational state. For BCA, the D3 and D6 potential (which are applied between the deflection transfer and funnel 1 [F1] and the accumulation exit and the start of the ramp, respectively) had most profound effects, showing multimodal CCS distributions at higher potentials indicating gradual unfolding. The other DC potentials only marginally altered the CCS profiles of BCA. To allow for more general conclusions, five additional proteins of diverse molecular weight and conformational stability were analyzed, and for the main protein charge states, CCS profiles were constructed. Principal component analysis (PCA) of the obtained data showed that D1 and D3 exhibit the highest degree of correlation with the ratio of folded and unfolded protein (F/U) as extracted from the mobilograms obtained per set D potential. The correlation of D6 with F/U and protein charge were similar, and D2, D4, and D5 showed an inverse correlation with F/U but were correlated with protein charge. Although DC boundary values for induced conformational changes appeared protein dependent, a set of DC values could be determined, which assured native analysis of most proteins.     

Synthesis, characterization and antimicrobial investigation of mechanochemically processed silver doped ZnO nanoparticles

The application of nanomaterials has gained considerable momentum in various fields in recent years due to their high reactivity, excellent surface properties and quantum effects in the nanometer range. The properties of zinc oxide (ZnO) vary with its crystallite size or particle size and often nanocrystalline ZnO is seen to exhibit superior physical and chemical properties due to their higher surface area and modified electronic structure. ZnO nanoparticles are reported to exhibit strong bacterial inhibiting activity and silver (Ag) has been extensively used for its antimicrobial properties since ages. In this study, Ag doped ZnO nanoparticles were synthesized by mechanochemical processing in a high energy ball mill and investigated for antimicrobial activity. The nanocrystalline nature of zinc oxide was established by X-ray diffraction (XRD) studies. It is seen from the XRD data obtained from the samples, that crystallite size of the zinc oxide nanoparticles is seen to decrease with increasing Ag addition. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) data also supported the nanoparticle formation during the synthesis. The doped nanoparticles were subjected to antimicrobial investigation and found that both increase in Ag content and decrease in particle size contributed significantly towards antimicrobial efficiency. It was also observed that Ag doped ZnO nanoparticles possess enhanced antimicrobial potential than that of virgin ZnO against the studied microorganisms of Escherichia coli and Staphylococcus aureus.     

A T‐shaped selenenyl halide

The title selenenyl halide complex, 3‐iodo‐2‐phenyl‐3H‐3‐selenaindazole, C₁₂H₉IN₂Se, has an almost planar conformation and a nearly ideal T‐shape for the Se(INC) moiety [Se—I 2.8122 (12), Se—C 1.881 (7) and Se—N2 2.051 (6) Å; C—Se—N 79.6 (3), C—Se—I 96.8 (2) and N—Se—I 176.17 (17)°]. This arrangement, together with the two selenium lone pairs, leads to a distorted trigonal‐bipyrimidal geometry about the Se atom. Intermolecular interactions are largely limited to stacking forces.     

Effect of bication (Cu-Cr) substitution on the structure and electrochemical performance of LiMn2O4 spinel cathodes at low and high current rates

This report describes the detailed structural and electrochemical characterization of a series of low content (0.01 to 0.05) Cu-Cr bi-metal doped LiMn₂O₄ cathode material synthesized by sol–gel method. The structural and morphological features were described using XRD, SEM, TEM, EDAX and FTIR techniques. The electron transfer and its feasibility were discussed through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements. The charge–discharge studies were performed to evaluate the capacity fading and rate capability. It was found that the electrochemical performance is very much dependent on the amount of Cu-Cr bi-metal doping and interestingly decreased the capacity fading with high cycleability. The sample with the least amount of dopants (i.e., LiCu_0.01Cr_0.01Mn_1.98O₄) demonstrated much improved capacity, cycleability and high rate capability. The LiCu_0.01Cr_0.01Mn_1.98O₄ cathode exhibited a discharge capacity of 112 mA h g^?1 at very first cycle and retained 93 mA h g^?1 after 100 cycles at a C rate of 0.3. Further, the same material at very high current density (5 C) retained 83% of the initial discharge capacity. The Cu-Cr doping stabilized the spinel structure by suppressing the Jahn-Teller distortion effect and Mn dissolution and the resultant material showed the workability of the cathodes for devices which work at substantially high C-rate of 5C.     

Studies on thermal, thermal ageing and morphological characteristics of EPDM-g-VTES/LLDPE

A novel graft copolymer of vinyltriethoxysilane onto ethylene propylene diene terpolymer has been developed by grafting varying contents of VTES using dicumyl peroxide as an initiator in a twin-screw extruder. Grafting of VTES and EPDM has been ascertained using FTIR. The EPDM-g-VTES developed has been blended with different weight percentage of linear low density polyethylene [LLDPE] by melt mixing. Thermal, thermal ageing and morphological behaviour of the blends are studied with respect to the effect of blend composition, static vulcanization and dynamic vulcanization with varying quantities of VTES and LLDPE. The incorporation of silane moiety onto EPDM raises the inception and final decomposition temperature. The stability EPDM-g-VTES/LLDPE blend increases with increase in concentration of EPDM-g-VTES due to thermally stable Si-O-Si linkage. It was ascertain from SEM micrograph that EPDM-g-VTES/LLDPE blends lead to formation of interpenetrating crosslinked network during hot water treatment and by treatment with DCP, respectively. The linear, statically vulcanized, dynamically vulcanized and filled blends of EPDM-g-VTES/LLDPE have been characterized to assess the suitability of the blends for high performance applications. In addition, it is also observed that the incorporation of fillers improves thermal stability of the blends.