Influence of humic substances on sorption and methylation processes of inorganic- and organo-tin species

The influence of humic substances on sorption and methylation processes for inorganic- and organotin species is presented. Four sediment samples from different locations of the Rivers Elbe, Mulde and Spittelwasser, Germany, with different organotin and humic contents were selected to extract the humic and fulvic acids. The various fractions—the original sediment, the humic acid, the fulvic acid and the residual sediment—were analysed for their organotin content. The individual buyltin species show quite different distribution patterns. Monobutyltin is found mostly associated with humic acids. Dibutyltin shows a nonunique behaviour. At low total organotin content, dibutyltin is found bonded to humic and fulvic acids, whereas at high organotin content dibutyltin is distributed more with the residual sediment. Most of the tributyltin remains in the sediment unextracted; only small quantities of it are in the fulvic acid fraction. Tetrabutyltin is only in the humic acid fraction when it binds to humic matter; it mostly remains in the sediment. General observations indicate that ionic butyltin species bind to fulvic acids whereas the non-polar tetrabutyltin is not found in the fulvic acid fractions in any of the samples. The appearance of monomethyl- and dimethyl-tin species in the humic and fulvic acid fractions after the alkaline extraction was surprising. There is a correlation between the humic content of the sample and the formation of methyltin species. Evidence is provided by experiments that humic substances act as methylation agents.     

Role of orientation in kinetics of nucleation and growth of crystals in polymers

A theoretical framework is provided for generalizing the inferences drawn from the results of earlier experimental studies of kinetics of crystallization in oriented poly(ethylene terephthalate). The framework is obtained by combining extensions of classical nucleation theories in polymers^3,4 and a theory of crystal growth with anisotropic incorporation of segments into growing crystals.¹⁵ It is shown that, while a very strong dependence of rate of primary nucleation on orientation does exist, there is a only a much weaker dependence of rate of crystal growth on the orientation of the crystallizing polymer. The theoretical formulation provided here would allow qualitative estimates for comparison with experiments.     

Raney nickel reductions—VIII A synthesis of 1:2-benzanthracene and its 3′-methyl and 4-methyl derivatives

1:2-Benzanthracene and the 3′-methyl derivative have been prepared by Raney nickel reduction of the sulphuric esters of the leuco derivatives of 1:2-benzanthraquinone and 4′-chloro-3′-methyl-1:2-benzanthraquinone, followed by dehydrogenation. 3-Hydroxy-1:2-benzanthraquinone was methylated in the 4-position by formaldehyde, sodium hydrosulphite and sodium hydroxide solution (the Marschalk reaction). Simultaneous reduction of the nuclear hydroxyl and quinone groups was effected by Raney nickel reduction of the trisulphuric ester of 3:9:10-trihydroxy-4-methyl-1:2-benzanthracene, and the resultant hexahydro-4-methyl-1:2-benzanthracene was dehydrogenated to 4-methyl-1:2-benzanthracene. The preparation of 3:4:9:10-dibenzopyrene from Mayvat brilliant red AF by Raney nickel reduction of the sulphuric ester of the leuco derivative and subsequent dehydrogenation is described.     

Extraction and micro-determination of manganese(II) with oxine and aliquat 336

A sensitive and selective method has been developed for the micro-determination of Mn(II) by the selective extraction of the yellow Mn(II)-8-hydroxyquinolinate complex with a liquid ion-exchanger, Aliquat 336, from basic medium. The molar absorptivity of the complex is 2.2 x 10(4)1.mole(-1).cm(-1) at 420 nm and the colour system obeys Beer's law in the range 0.1-3.5 ppm Mn(II) in the final solution. The composition and stability of the complex are discussed. Potential interferents have been examined and the method is applied to analysis of standard steel and bronze samples.     

Use of a carboxylate exchanger in the determination of copper in distilled water by neutron activation analysis

Copper in distilled water is collected on Zeokarb 226(NH ₄ ⁺ ) and irradiated with thermal neutrons. By comparison of the induced activity of 0.51 MeV photopeak of⁶⁴Cu with that of a standard, irradiated under comparable conditions, copper at ppb levels is easily determined.     

Translational hydrodynamics for binary mixtures: Memory from internal molecular relaxation

We consider a binary fluid mixture made up of a monatomic species and a two level molecular species and investigate the decay of correlations in the hydrodynamic variables. By restricting our considerations to the translationally hydrodynamic situations, we deduce a set of generalised hydrodynamic equations in which the frequency, ω, and wavenumber, k, dependent memory arises solely from the internal molecular relaxation. From these generalised hydrodynamic equations, we identify various (k, ω) dependent transport coefficients and the relaxation time which depends on k. We also compute the spectrum of (polarised) light scattered from such a binary mixture. We illustrate the dependence on k, ω and concentration in the problem by a numerical calculation of the generalised transport coefficients, the Rayleigh-Brillouin spectrum and the dispersion of various modes in this spectrum for the case of thermal relaxation in a parahydrogen-helium mixture.     

Synthesis and Systematic Study on the Effect of Different PEG Units on Stability of PEGylated,Integrin-αvβ6-Specific A20FMDV2 Analogues in Rat Serum and Human Plasma

A20FMDV2 is a 20-mer peptide that exhibits high selectivity and affinity for the tumour-related αvβ6 integrin that can compete with extracellular ligands for the crucial RGD binding site, playing a role as a promising αvβ6-specific inhibitor for anti-cancer therapies. Unfortunately, the clinical value of A20FMDV2 is limited by its poor half-life in blood caused by rapid renal excretion and its reported high susceptibility to serum proteases. The incorporation of poly (ethylene glycol) chains, coined PEGylation, is a well-established approach to improve the pharmacokinetic properties of drug molecules. Here, we report a systematic study on the incorporation of a varying number of ethylene glycol units (1–20) into the A20FMDV2 peptide to establish the effects of PEGylation size on the peptide stability in both rat serum and human plasma. In addition, the effect of acetyl and propionyl PEGylation handles on peptide stability is also described. Selected peptide analogues were assessed for integrin-αvβ6-targeted binding, showing good specificity and activity in vitro. Stability studies in rat serum established that all of the PEGylated peptides displayed good stability, and an A20FMDV2 peptide containing twenty ethylene glycol units (PEG₂₀) was the most stable. Surprisingly, the stability testing in human plasma identified shorter PEGs (PEG₂ and PEG₅) as more resistant to degradation than longer PEGs, a trend which was also observed with affinity binding to integrin αvβ6.     

Synthesis and Characterization of Some Novel Dialkyldithiophosphate Derivatives of Macrocyclic Complexes of Pb(II) Having N2 S2 Potential Donors in 14- to 20-Membered Rings

Dialkyldithiophosphate derivatives of macrocyclic complexes of Pb(II), having N₂S₂ potential donors, of the general formula, [Pb(L)S₂P(OR)₂] (where L = macrocyclic ligands L¹, L², L³, L⁴ & L⁵ and R = CH₃-, C₃H₇ ⁿ- & C₃H₇ ⁱ-) have been Synthesized from the reactions of [Pb(L)X₂] (where X = Cl, NO₃, or CH₃COO) with sodium dialkyl dithiophosphates in 1:2 molar ratios in THF. Fifteen new derivatives have been synthesized by the combination of five macrocyclic complexes of 14–20 member rings with three different types of dialkyldithiophosphate. These compounds have been characterized by elemental analysis, molar conductance, molecular weight determination, IR, ¹H NMR, ¹³C, and ³¹P NMR. Molecular weight determinations of these complexes indicate their monomeric nature. An octahedral structure is proposed.     

Electrical,Mechanical, and Thermal Properties of Poly(4,4′-Cyclohexylidene Diphenylene-m-Benzene/Toluene-2,4-Disulfonate)

Abstract

The films of poly(4,4′-cyclohexylidene diphenylene-m-benzene disulfonate) (PSBB, 0.610 mm thick) and poly(4,4′-cyclohexylidene diphenylene-toluene-2,4-disulfonate) (PSBT, 0.537 mm thick) showed 8.23 ± 0.25 and 9.6 ± 0.245 kV, respectively, as the dielectric breakdown voltage (ac) in air at room temperature. The same films have 8.8 × 10¹¹ and 7.2 × 10¹⁴ ω°Cm volume resistivity. PSBB (40 μm thick) and PSBT (50 μm thick) films have tensile strengths of 1971 and 1677 kg/cm² and percent elongations of 1.3 and 1.2, respectively. The static hardnesses of PSBB (0.178 mm thick) and PSBT (0.190 mm thick) at three different loads (15–60 g) are 12.8–15.5 and 14.5–16.5 kg/mm², respectively. PSBB and PSBT are thermally stable up to about 355°C in an N₂ atmosphere and involve two-step degradation. DSC and DTA showed T _g at about 125–127 and 138–142°C, respectively, for PSBB and PSBT in N₂. PSBB and PSBT have comparable breakdown voltages and volume resistivity with some useful plastics whereas they have superior T _g and thermal stability with retention of excellent solubility in common solvents over polysulfonates without a cardo group. Thus, the cardo (cyclo-hexyl) group has enhanced thermal and mechanical properties with excellent solubility and easy processing.