Photoluminescent properties and Raman spectra of ZnO-based scintillating glasses

Glasses in SiO₂–ZnO–BaO system with the different ZnO/BaO ratio were studied. In some cases, BaF₂ was introduced to substitute for BaO on the equal base. Photoluminescent spectra showed that ZnO in glass matrices behaved somewhat differently from ZnO crystals. Especially, the introduction of fluorine ions led to dramatic shift of UV emission band of glasses closer to that of ZnO crystals. Raman spectral analysis provided consistent results. In particular, Raman bands in the high frequency region are sensitive to effects of different ZnO/BaO or BaF₂/BaO ratio on structure of glasses.     

Study of the dissolution and growth of salt single crystals in inhomogeneous acoustic fields: I. A standing acoustic wave

The growth of the isolated (100) face of a KDP crystal at exposure of the phase boundary to the initial ultrasound field and a standing acoustic wave has been investigated. A significant growth response of this face, exposed to sound normally along the acoustic axis in the near zone of a piston-like half-wave vibrator with f = 20 kHz and tangentially in the pulsed two-frequency (f = 600 and 900 kHz) standing-wave mode, has been revealed. It is shown that the mechanisms of mass exchange enhancement in these acoustic modes are different. The results obtained show a fundamental possibility of controlling crystal growth and dissolution by varying the parameters of inhomogeneous acoustic field.     

Doping of KDP single crystals with cerium: Growth and optical properties

The features of doping of KDP crystals with cerium ions and organocerium complexes with alizarin complexon and arsenazo III have been investigated. It is established that “direct” doping by introducing cerium salts into the initial solution cannot be implemented. The effect of organometallic complexes of cerium on the crystal growth has been studied. Organocerium complexes predominantly enter the prismatic or pyramidal growth sectors. It is shown that the complex arsenazo III + Ce blocks the growth of the prismatic sector. Cerium-doped KDP crystals exhibit a photoluminescence band peaking at the wavelength λ_max= 350 nm.     

An analysis of migration paths of Li+ cations in ternary oxygen-containing compounds Li p X q O r

A new method was developed for studying voids and channels in crystal structures based on the Voronoi-Dirichlet partition of crystal space, and 822 structurally characterized ternary compounds Li ^p X ^q O ^r were analyzed for the first time. For these compounds, the dimensionality was determined and the migration patterns of channel systems capable of providing lithium-ion transport were constructed. The calculated coordinates of lithium atoms in the centers of the voids are consistent (within 0.4 ?) with the known structural data. Among these compounds, 113 compounds have infinite channel systems, 60 compounds (18 structural types, STs) have been described earlier in the literature as solid electrolytes, and 53 compounds (23 STs) can be considered as potential one-, two-, or three-dimensional ionic conductors (13, 3, and 7 STs, respectively). Original Russian Text ? N.A. Anurova, V.A. Blatov, G.D. Ilyushin, O.A. Blatova, A.K. Ivanov-Shitz, L.N. Dem’yanets, 2008, published in Kristallografiya, 2008, Vol. 53, No. 6, pp. 987–993.     

Fully developed mixed convection in horizontal and inclined tubes with uniform heat flux using nanofluid

Fully developed laminar mixed convection of a nanofluid consists of water and Al₂O₃ in horizontal and inclined tubes has been studied numerically. Three-dimensional elliptic governing equations have been solved to investigate the flow behaviors over a wide range of the Grashof and Reynolds numbers. Comparisons with previously published experimental and numerical works on mixed convection in a horizontal and inclined tube are performed and good agreements between the results are observed. Effects of nanoparticles concentration and tube inclinations on the hydrodynamics and thermal parameters are presented and discussed. It is shown that the nanoparticles concentration does not have significant effects on the hydrodynamics parameters. Heat transfer coefficient increases by 15% at 4 Vol.% Al₂O₃. Skin friction coefficient continually increases with the tube inclination, but the heat transfer coefficient reaches a maximum at the inclination angle of 45°.     

Accuracy analysis of airborne gravimeter calibration using repeated flight paths

Some possible errors in determining the gravity anomalies are discussed. Such errors may be caused by an inaccurate calibration of the gravimeter used in an airborne survey system. An approach based on wavelet decompositions is proposed for its additional calibration with the use of flight data obtained during repeated flights.     

A quality criterion for visual tracking during nystagmus

The aim of this study is to construct a quantitative characteristic for the degree of gaze stabilization on a visual target with consideration of physiological constraints. A quality criterion for visual tracking during optokinetic vestibulocervical nystagmus is proposed. The index of imaginary tracking during rotation in the dark allows one to speak of a difference in the image stabilization quality between a healthy person and a patient. Experimental nystagmus data are used to calculate the quality index of visual tracking and the index of imaginary tracking.     

Buckling of a stiff thin film on a compliant substrate in large deformation

A finite-deformation theory is developed to study the mechanics of thin buckled films on compliant substrates. Perturbation analysis is performed for this highly nonlinear system to obtain the analytical solution. The results agree well with experiments and finite element analysis in wavelength and amplitude. In particular, it is found that the wavelength depends on the strain. Based on the accurate wavelength and amplitude, the membrane and peak strains in thin films, and stretchability and compressibility of the system are also obtained analytically.     

Multi-layer thin films/substrate system subjected to non-uniform misfit strains

Current methodologies used for the inference of thin film stress through curvature measurement are strictly restricted to stress and curvature states that are assumed to remain uniform over the entire film/substrate system. These methodologies have recently been extended to a single layer of thin film deposited on a substrate subjected to the non-uniform misfit strain in the thin film. Such methodologies are further extended to multi-layer thin films deposited on a substrate in the present study. Each thin film may have its own non-uniform misfit strain. We derive relations between the stresses in each thin film and the change of system curvatures due to the deposition of each thin film. The interface shear stresses between the adjacent films and between the thin film and the substrate are also obtained from the system curvatures. This provides the basis for the experimental determination of thin film stresses in multi-layer thin films on a substrate.