Magnetic resonance imaging of the uterus at an ultra low (0.02 T) magnetic field.

In vivo pelvic imaging of 39 women and in vitro relaxation time measurements of four uterine specimens were performed using an ultra low field (0.02 T) MRI unit. Average T1 times measured in vitro at 37 degrees C for the myometrium and endometrium were 206 ms (SD 47 ms) and 389 ms (SD 21 ms), respectively. Corresponding T2 times were 95 ms (SD 20 ms) and 167 ms (SD 13 ms). The proton relaxation of almost all myometrial specimens proved to be biexponential, but of all endometrial specimens was monoexponential. Contrast measurements between endometrium versus myometrium and myometrium versus the junctional zone were performed after imaging 18 volunteer women using different pulse sequence parameters. Normal uterine structures were optimally demonstrated by SE 700/70. Relatively short repetition times could be used, because spin-lattice relaxation times were short at the low magnetic field. Consequently, the short repetition times allowed averaging of four excitations to create adequate images within an acceptable scanning time. In addition to T2-weighted images a T1-weighted inversion recovery sequence with a short inversion time of 50 ms (IR 1000/50/40) adequately differentiated the three uterine zones. Although pathologic lesions of the uterus including leiomyomas, anomalies and carcinomas were well demonstrated, especially with the T2-weighted spin echo pulse sequence, further investigations are needed to evaluate the optimal technique for ultra low field MR imaging of uterine tumors.     

Product Integration Rules at Clenshaw-Curtis and Related Points: A Robust Implementation

Product integration rules generalizing the Fej?r, Clenshaw-Curtis,and Filippi quadrature rules respectively are derived for integralswith trigonometric and hyperbolic weight factors. The Chebyshevmoments of the weight functions are found to be given by well-conditionedexpressions, in terms of hypergeometric functions ₀F₁. An a priori error estimator is discussed which is shown bothto avoid wasteful invocation of the integration rule and toincrease significantly the robustness of the automatic quadratureprocedure. Then, specializing to extended Clenshaw-Curtis (ECC) rules,three types of a posteriori error estimates are considered andthe existence of a great risk of their failure is demonstratedby large scale validation tests. An empirical error estimator,superseding them for slowly varying integrands, is found toresult in a spectacular increase in the output reliability. Finally, enhancements in the control of the interval subdivisionstrategy aiming at increasing code robustness is discussed.Comparison with the code DQAWO of QUADPACK, with about a hundredthousand solved integrals, is illustrative of the increasedrobustness and error estimate reliability of our computer codeimplementation of the ECC rules.     

X-ray evidence for the absence of 90°-domains in polycrystalline PbTiO3 thin films with grains below a critical size

3 thin films is systematically studied by using X-ray diffraction (XRD). The PbTiO₃ thin films with different average grain sizes were prepared on various substrates by a sol-gel process. The films on NaCl and fused glass are randomly grain-oriented, while those on (111)Pt/Ti/SiO₂/Si are highly {100} cubic index grain-oriented . It is found from the XRD patterns of the films on NaCl that with decreasing average grain size from 230 to 80 nm, the intensities of high h index (h>l) peaks (hkl), such as (100), (110), (200), (201), (210), (211), etc., decrease rapidly and ultimately disappear, whereas another set of peaks (lkh), including (001), (002), (102), (112), etc., are still intense. This interesting result suggests that at grain size below a certain critical size an increasing number of grains no longer show 90°-domains, which is confirmed by TEM observations. Meanwhile, X-ray evidence of such a grain-size-related absence of 90°-domains is also found for PbTiO₃ films on Pt(111) and fused-glass substrates. The volume fractions of single-domain grains (without 90°-domains) in the films are estimated from their XRD patterns. By combining SEM and TEM investigations, the critical grain size for the formation of 90°-domains is further determined to be near 200 nm. Received: 19 December 1996/Accepted: 24 March 1997     

Inhomogeneities in silicon p-n-junctions

Latent macroscopic defects in silicon are detected by electrical and electron microscope measurements. They lead to anomalous temperature dependence of the Fermi level position and growth in the hole capture coefficient. A level with energy of 0.55 eV measured from the conduction zone controls the recombination process. It is proposed that macroscopic defects develop upon association of oxygen-silicon vacancy complexes. Action of an electron beam leads to reversible changes which increase upon multiple scanning, affecting the value of the diffusion length.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 4, pp. 71–75, April, 1991.     

Optical quenching of the magnetoplastic effect in NaCl crystals

Observations indicate that illuminating NaCl crystals by ultraviolet light (λ=350 nm) suppresses the magnetoplastic effect. The processes induced by illumination take place in a subsystem of point defects and are related to a change in the state of magnetically sensitive dislocation pinning sites. Fiz. Tverd. Tela (St. Petersburg) 39, 1389–1391 (1996)     

Variational perturbation theory. Anharmonic oscillator

A nonperturbative method is suggested for calculating functional integrals. Its efficiency is demonstrated for the quantum-mechanical anharmonic oscillator. A quantity we are interested in is represented by a series, a finite number of terms of which describes not only the region of small coupling constants but well reproduces the strong coupling limit. The method is formulated only in terms of the Gaussian functional quadratures and diagrams are used of the conventional perturbation theory.     

Possible application of X-ray optical elements for reducing the spectral bandwidth of an X-ray SASE FEL

A new design for a single pass X-ray Self-Amplified Spontaneous Emission (SASE) FEL is proposed. The scheme consists of two undulators and an X-ray monochromator located between them. The first stage of the FEL amplifier operates in the SASE linear regime. After the exit of the first undulator the electron bunch is guided through a non-isochronous bypass and the X-ray beam enters the monochromator. The main function of the bypass is to suppress the modulation of the electron beam induced in the first undulator. This is possible because of the finite value of the natural energy spread in the beam. At the entrance to the second undulator the radiation power from the monochromator dominates significantly over the shot noise and the residual electron bunching. As a result the second stage of the FEL amplifier operates in the steady-state regime when the input signal bandwidth is small with respect to that of the FEL amplifier. Integral losses of the radiation power in the monochromator are relatively small because grazing incidence optics can be used. The proposed scheme is illustrated for the example of the 6 nm option SASE FEL at the TESLA Test Facility under construction at DESY. As shown in this paper the spectral bandwidth of such a two-stage SASE FEL (Δλ/λ 5 × 10⁻⁵) is close to the limit defined by the finite duration of the radiation pulse. The average brilliance is equal to 7 × 10²⁴ photons/(s × mrad² × mm² × 0.1% bandw.) which is by two orders of magnitude higher than the value which could be reached by the conventional SASE FEL. The monochromatization of the radiation is performed at a low level of radiation power (about 500 times less than the saturation level) which allows one to use conventional X-ray optical elements (grazing incidence grating and mirrors) for the monochromator design.