Poly(L‐lysine) and clay nanocomposite with desired matrix secondary structure: Effects of polypeptide molecular weight

Nanocomposites (NC) were formed using cationic poly(L ‐lysine) (PLL), a semicrystalline polypeptide, that was reinforced by sodium montmorillonite (MMT) clay via solution intercalation technique. By varying solution conditions such as pH, temperature, and polypeptide concentration in the presence of clay platelets, the secondary structure of PLL was controllably altered into α‐helical, β‐sheet, and random coil. The high molecular weight polypeptide shows a strong propensity to fold into the β‐sheet structure when cast as films, irrespective of the initial secondary structure in solution. Nanocomposite local morphology confirms intercalated MMT platelets with PLL over a wide range of compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 239–252, 2007.     

Quantification of trace elements in human serum fractions by liquid chromatography and inductively coupled plasma mass spectrometry

On‐line coupling of LC and ICP‐MS has been used for fractionation and detection of species of Cu, Fe, I, Se and Zn in human serum. It has been shown that anion exchange chromatography provided better separation capability (both intra‐ and inter‐element) than size‐exclusion chromatography. The mobile phases for ion exchange chromatography consisted of Tris–HNO₃ buffer and ammonium salt (nitrate, acetate or formate). Formate was found to be the best mobile phase counter ion, enabling good chromatographic separation, and is acceptable for mass spectrometry too. The quantitative evaluation of element concentrations adhering to individual fractions was performed by the peak area normalization method. The repeatability of results ranged from 3 to 15% (depending on the element concentration level) and represented the main part of the result uncertainty. The accuracy of Cu and Zn fraction determinations was confirmed by comparison with the isotope dilution technique. Copyright © 2006 John Wiley & Sons, Ltd.     

Aeolian Tones of a Honeycomb Lattice Cell

Aeroacoustic resonant oscillations (aeolian tones) are studied for flow past two plates forming a cross in a square cross section channel. Possible oscillation modes are classified on the basis of admissible symmetry groups and the existence of the modes is proved. The infinite linear system of equations for these modes obtained by the sewing method was simplified and studied numerically. Curves of eigenfrequency versus plate length are constructed. The form of the eigenfunctions is studied.     

Lieb-thirring integral inequalities and sharp bounds for the dimension of the attractor of the Navier-Stokes equations with friction

A two-dimensional Navier-Stokes system with friction is considered in a large rect-angular periodic domain with area on the order of α^?1, α → 0. Bounds for the dimension of the attractor are obtained, which are sharp both as α → 0 and v → 0, where v is the viscosity coefficient.     

Influence of barrier parameters on tunneling in ferromagnet-insulator-ferromagnet contacts

The contribution of electrons moving at large angles to the barrier junction plane to the tunnel current is calculated. This contribution turns out to be small only if the Fermi energy of the electrons equals several electron volts. Otherwise, specifically, when the Fermi energy is no higher than 1–2 eV, this contribution dominates in high and thin potential barriers. It is found that the tunnel magnetic resistance in ferromagnet-insulator-ferromagnet contacts correlates with this contribution. It is this correlation that is responsible for a decrease in this contribution as the potential barriers get lower and thicker.     

Material tensor parameters of LiNbO3 relevant for electro- and elasto-optics

The complete set of self-consistent parameters of nominally undoped LiNbO₃ crystals of congruent composition that describe the electro-optic, piezoelectric, elasto-optic, elastic, and dielectric response has been determined by numerically evaluating available measurements. The parameters were determined at room temperature and consist of the low-frequency clamped dielectric constants ε^S _ij, elastic stiffness constants at constant electric field C^E _ijkl, piezoelectric stress coefficients e_ijk, elasto-optic constants at constant electric field p^E _ijkl, and clamped electro-optic coefficients r^S _ijk. It is shown that the complete set is required for calculating the effective electro-optic coefficients and dielectric constants in photorefractive applications of LiNbO₃. Received: 4 January 2002 / Revised version: 1 February 2002 / Published online: 14 March 2002     

Method of linear prediction in the ultrasonic spectroscopy of rock

The possibility of using the resonant acoustic spectroscopy method for testing the internal state of rock is considered. This method can be used for the determination of the concentration of defects and their spatial distribution. A rock specimen with defects is characterized by a high loss of vibrational energy, which leads to the overlapping of the resonant responses. In this case, the complex resonant frequencies are determined as the parameters of a model that describes the measured transfer function of the response of the mechanical system. The linearity of the vibratory system is used as the a priori information for presetting the functional dependences of the model. An algorithm is developed for the determination of the parameters of the resonances in conditions of their partial overlapping. Examples are presented to demonstrate the possibility of analyzing the complex elastic constant tensor of rock by the acoustic spectroscopy method. The proposed method of experimental data processing provides the possibility for the determination of the weak anisotropy that occurs in the velocity of sound because of a partial fracture of rock.     

Boundary Problems for the Quantum Bose Gas

A relaxation kinetic equation that describes the behavior of a Bose gas is derived. The Kramers half-space problem on isothermal slip is treated. An analytical solution and the number-of-particle distribution function for particles flying toward a wall, in explicit form, are obtained. The dependence of the slip velocity on the parameter that is the ratio of the chemical potential to the product of Boltzmann's constant by the absolute temperature is analyzed. The influence of the quantum effects on the isothermal slip coefficient is evaluated for He⁴.