Kinetics and mechanism of the formation of poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene] and poly(methyldecylsiloxane) by hydrosilylation

The kinetics of the formation of poly(carbosiloxane), as well as of alkyl-substituted poly(siloxane), by Karstedt's catalyst catalyzed hydrosilylation were investigated. Linear poly(carbosiloxane), poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene], (PTMDSE), was obtained by hydrosilylation of 1,3-divinyltetramethyldisiloxane (DVTMDS) and 1,1,3,3-tetramethyldisiloxane (TMDS), while alkyl-substituted poly(siloxane), poly(methyldecylsiloxane), (PMDS), was synthesized by hydrosilylation of poly(methylhydrosiloxane) (PMHS) and 1-decene. To investigate the kinetics of PTMDSE formation, two series of experiments were performed at reaction temperatures ranging from 25 to 56 °C and with catalyst concentrations ranging from 7.0 × 10⁻⁶ to 3.1 × 10⁻⁵ mol Pt/mol CHCH₂. A series of experiments was performed at reaction temperatures ranging from 28 to 48 °C, with catalyst concentrations of 7.0 ×10⁻⁶ mol of Pt per mol of CHCH₂, when kinetics of PMDS formation was investigated. All reactions were carried out in bulk, with equimolar amounts of the reacting Si H and CHCH₂ groups. The course of the reactions was monitored by following the disappearance of the Si H bands using quantitative infrared spectroscopy. The results obtained showed typical first order kinetics for the PTMDSE formation, consistent with the proposed reaction mechanism. In the case of PMDS an induction period occurred at lower reaction temperatures, but disappeared at 44 °C and the rate of Si H conversion also started to follow the first-order kinetics. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2246–2258, 2007     

Calculation of the Radiating Characteristics of a Thermodynamically Nonuniform Gas Medium

Passive methods of remote analysis of waste gases of industrial enterprises and aircrafts engines and gases ejected in eruptions of volcanos, in fires, and in other processes disturbing the atmosphere are now of limited utility because of the lack of well-developed mathematical techniques for solving the inverse problems of gas analysis. However, the advantage of these methods is obvious, since the equipment is limited to a receiving device and the gas medium serves as a radiator. At the same time, in modern techniques, the interpretation of measurements of emissivities of gases is performed using a phenomenological approach such that experimental data on radiation characteristics of various objects are approximated by simple polynomial relations whose coefficients are determined by minimization methods. This approach does not allow one to investigate the mechanism of the processes occurring in a radiating medium and gives no way of solving the inverse problem of monitoring the composition and thermodynamic parameters of a medium which disturbs the atmosphere by thermal effects. In elaborating theoretical methods of gas analysis, the elaboration of the direct problem of calculation of radiating characteristics of gases is of importance, since it is not clear how the emissivity of a gas medium depends on its thermodynamic parameters. This paper is devoted to the above problem. Here, the error is estimated that arises in modeling a nonuniform gas medium with an actual temperature distribution, which linearly depends on coordinate, by a uniform gas layer. It is shown that the difference between the radiation intensities calculated for uniform and nonuniform media can be significant in the practically important case where the recording device is in a zone of normal temperatures. This implies that the error of reconstruction of the spectroscopic and molecular parameters of gaseous compounds from high-temperature measurements of the radiating and absorbing characteristics should take into account the thermodynamic nonuniformity of the medium.     

Effect of weak magnetic field on polariton-electron scattering in semiconductor microcavities

The polarition linewidth is calculated as a function of magnetic field applied perpendicular to the microcavity plane for microcavity excition-polaritons scattered by free electrons in a quantum well. The calculated function exhibits oscillatory behavior; i.e., the scattering rate either increases or decreases with magnetic induction. Possible applications of this effect are discussed.     

Synthesis and characterization of polyaniline doped with organic acids

Spectroscopic [UV–visible and Fourier transform IR (FTIR)] and thermal properties of chemically synthesized polyanilines are found to be affected by varying the protonation media (acetic, citric, oxalic, and tartaric acid). The optical spectra show the presence of a greater fraction of fully oxidized insulating pernigraniline phase in polyaniline doped with acetic acid. In contrast, the selectivity in the formation of the conducting phase is higher in oxalic acid as a protonic acid media. The FTIR spectra of these polymers reveal a higher ratio of the relative intensities of the quinoid to benzenoid ring modes in acetic acid doped polyaniline. Scanning electron micrographs revealed a sponge‐like structure derived from the aggregation of the small granules in acetic acid and oxalic acid doped polyaniline. A three‐step decomposition pattern is observed in all the polymers, regardless of the protonic acid used for the doping. The second step loss related to the loss of dopant is found to be higher in the oxalic acid doped polymer. In accordance with these results the conductivity is also found to be higher in oxalic acid doped material. The temperature dependent conductivity measurements show the thermal activated behavior in all the polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2043–2049, 2004     

Microstructural assessment of InN-on-GaN films grown by plasma-assisted MBE

The structural properties of InN thin films, grown by rf plasma-assisted molecular beam epitaxy on Ga-face GaN/Al₂O₃(0001) substrates, were investigated by means of conventional and high resolution electron microscopy. Our observations showed that a uniform InN film of total thickness up to 1 μm could be readily grown on GaN without any indication of columnar growth. A clear epitaxial orientation relationship of , was determined. The quality of the InN film was rather good, having threading dislocations as the dominant structural defect with a density in the range of 10⁹–10¹⁰ cm⁻². The crystal lattice parameters of wurtzite InN were estimated by electron diffraction analysis to be a=0.354 nm and c=0.569 nm, using Al₂O₃ as the reference crystal. Heteroepitaxial growth of InN on GaN was accomplished by the introduction of a network of three regularly spaced misfit dislocation arrays at the atomically flat interface plane. The experimentally measured distance of misfit dislocations was 2.72 nm. This is in good agreement with the theoretical value derived from the in-plane lattice mismatch of InN and GaN, which indicated that nearly full relaxation of the interfacial strain between the two crystal lattices was achieved.     

New Heat-Resistant Polyimidates Derived from Bisphenols and Mono- and Dicarboxylic Acid Imidoyl Chlorides

New polyimidates were prepared from bisphenols and mono- and dicarboxylic acid imidoyl chlorides. The structures of the polymers were determined, and their physicochemical, chemical, and thermal properties were studied. The possibility of preparing film and compression materials with good mechanical characteristics from these polymers was examined.     

Relaxing local modes and the theory of low-frequency Raman scattering in glasses

Raman scattering in glasses is investigated theoretically. The experimental Raman spectra of glasses exhibit a low-frequency peak (at ～10 cm^?1) that, as a rule, is attributed to vibrational modes of nanometer-sized structural units (nanocrystallites). It is established that the elastic moduli of nanocrystallites must necessarily be dependent on their sizes due to the Laplace pressure effect. A theory of the low-frequency peak is constructed using a realistic size distribution function of nanocrystallites with allowance made for the Laplace pressure effect and the dissipation of vibrational energy. Within this theory, the shape of the low-frequency peak and its evolution with temperature can be analyzed quantitatively. The proposed approach offers a physical interpretation of the experimental data and provides insight into the relation of the characteristic nanocrystallite sizes to the elastic moduli and surface tension coefficients of materials.     

Analytical scheme calculations of angular momentum coupling and recoupling coefficients

We investigate the Scheme programming language opportunities to analytically calculate the Clebsch-Gordan coefficients, Wigner 6j and 9j symbols, and general recoupling coefficients that are used in the quantum theory of angular momentum. The considered coefficients are calculated by a direct evaluation of the sum formulas. The calculation results for large values of quantum angular momenta were compared with analogous calculations with FORTRAN and Java programming languages. The text was submitted by the authors in English.