A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

Mass transport in metals under intensive impulse reactions

An unusually high mobility of atoms under intensive impulse reactions is explained by the behavior of point defects at the shock wave front. It is shown that either a shock wave front or moving dislocations can capture the interstitials, or they can be thermally activated in the direction of the shock wave propagation.     

Dielectric and conductivity relaxations in quaternary ammonium polymer

Ionic conductivity of dry quaternary ammonium polymer, polydiallyldimethylammonium with Cl⁻ and H₂PO₄⁻ counter ions was studied in a wide range of frequencies (10⁻²-10⁷ Hz) and temperatures (300-470 K). The data were analysed within the formalism of permittivity. WAXS, and thermal properties of this polymer were investigated prior to conductivity measurements.     

Dynamic reflection holograms in CdF2 crystals with bistable centers

The diffraction efficiency and the recording and relaxation times of dynamic reflection holograms, recorded in CdF₂ crystals with bistable centers are studied experimentally in the temperature range 20–100°C. In the model experiments which measured the quality of the wave reflected from the hologram, the dynamic wavefront distortions are demonstrated to be efficiently compensated using a holographic corrector based on these crystals. CdF₂ crystals with bistable centers are likely to be useful in solving problems of correction of laser light wavefront and image correction in observation telescopes with nonideal primary mirrors.     

Lateral interactions in the thermal desorption of H2 from clean Cu/Ni(110) alloy surfaces

The adsorption of hydrogen on a clean Cu10%/Ni90% (110) alloy single crystal was studied using flash desorption spectroscopy (FDS), Auger electron spectroscopy (AES), and work function measurements. Surface compositions were varied from 100% Ni to 35% Ni. The hydrogen chemisorption on a-surface of 100% nickel revealed strong attractive interactions between the hydrogen atoms in accordance with previous work on Ni(100). Three desorption states (β₁, β₂ and α) appeared in the desorption spectra. The highest temperature (α) state was occupied only after the initial population of the β₂-state. As the amount of copper was increased in the nickel substrate, desorption from the higher energy binding α-state was reduced, indicating a decrease in the attractive interactions among hydrogen atoms. The hydrogen coverage at saturation was not affected by the addition of copper to the nickel substrate until the copper concentration was greater than 25% at which a sharp reduction in saturation coverage occurred. This phenomenon was apparently due to the adsorption of hydrogen on Ni atoms followed by occupation of NiNi and CuNi bridged adsorption sites, while occupation of CuCu sites was restricted due to an energy barrier to migration.     

Stochastic complete continuity property of operators connected with a Wiener process

We study properties of some linear and nonlinear operators which occur in the theory of stochastic differential and integral equations.Translated from Statisticheskie Metody Otsenivaniya i Proverki Gipotez, pp. 148–154, 1988.     

A method for computing the IR radiation of molecular gas jets in the volume approximation

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 55, No. 3, pp. 478–484, September, 1991.     

Rb saturation spectroscopy with an optically narrowed FM diode laser

A fast-frequency modulated (FM) diode laser has been optically narrowed using the technique of resonant optical feedback, to provide linewidths in each FM mode of ≈ 200 kHz peak-to-peak. With a drive frequency of 50 MHz and modulation index of 0.2, the FM laser has been used for the first time to obtain Doppler-free FM spectra of the Rb D₁ line at 795 nm. The potential use of this system for laser frequency stabilisation is discussed.     

Evaluation of integrals and the mellin transform

Translated from Itogi Nauki i Tekhniki, Seriya Matematicheskii Analiz, Vol. 27, pp. 3–146, 1989.     

Thermal emission spectrum from a semiconductor electron-hole plasma

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 55, No. 4, pp. 624–629, October, 1991.