Wave biomechanics of the skeletal muscle

Results of acoustic measurements in skeletal muscle are generalized. It is shown that assessment of the pathologies and functional condition of the muscular system is possible with the use of shear waves. The velocity of these waves in muscles is much smaller than the velocity of sound; therefore, a higher symmetry type is formed for them. In the presence of a preferential direction (along muscle fibers), it is characterized by only two rather than five (as in usual media with the same anisotropy) moduli of elasticity. A covariant form of the corresponding wave equation is presented. It is shown that dissipation properties of skeletal muscles can be controlled by contracting them isometrically. Pulsed loads (shocks) and vibrations are damped differently, depending on their frequency spectrum. Characteristic frequencies on the order of tens and hundreds of hertz are attenuated due to actin-myosin bridges association/dissociation dynamics in the contracted muscle. At higher (kilohertz) frequencies, when the muscle is tensed, viscosity of the tissue increases by a factor of several tens because of the increase in friction experienced by fibrillar structures as they move relative to the surrounding liquid; the tension of the fibers changes the hydrodynamic conditions of the flow around them. Finally, at higher frequencies, the attenuation is associated with the rheological properties of biological molecules, in particular, with their conformational dynamics in the wave field. Models that describe the controlled shock dissipation mechanisms are proposed. Corresponding solutions are found, including those that allow for nonlinear effects.     

On the construction of samples for testing approximate optimization methods for estimate calculation algorithms

To validate approximate optimization schemes for estimate calculation algorithms (ECAs), it is necessary to compute the optimal height, which cannot be done in a reasonable amount of time. A variety of samples are built for which the optimal height of the ECAs is known by construction.     

Factor and term ranks for matrix union over semirings

We consider the arithmetic properties of the factor-rank and term-rank functions for matrices over semirings. In particular, we investigate the sets of matrices that satisfy the extremes of inequalities for these rank functions of matrix union. The classification of the linear transformations that keep these sets invariant is obtained. __________ Translated from Fundamentalnaya i Prikladnaya Matematika, Vol. 9, No. 3, pp. 175–197, 2003.     

On the scales of computability potentials of finite algebras: Results and problems

We give a review of general known results on problems concerning the structure of scales of computability potentials of n-element algebras. We also formulate a number of natural open problems. __________ Translated from Fundamentalnaya i Prikladnaya Matematika, Vol. 9, No. 3, pp. 145–164, 2003.     

Sensitivity of depolarized lidar signals to cloud and aerosol particle properties

Measurements from depolarized lidars provide a promising method to retrieve both cloud and aerosol properties and a versatile complement to passive satellite-based sensors. For lidar observations of clouds and aerosols, multiple scattering plays an important role in the scattering process. Monte Carlo simulations are carried out to investigate the sensitivity of lidar backscattering depolarization to cloud and aerosol properties. Lidar parameters are chosen to be similar to those of the upcoming space-based CALIPSO lidar. Cases are considered that consist of a single cloud or aerosol layer, as well as a case in which cirrus clouds overlay different types of aerosols. It is demonstrated that besides thermodynamic cloud phase, the depolarized lidar signal may provide additional information on ice or aerosol particle shapes. However, our results show little sensitivity to ice or aerosol particle sizes. Additionally, for the case of multiple but overlapping layers involving both clouds and aerosols, the depolarized lidar contains information that can help identify the particle properties of each layer.     

Influence of SiO2 in SiCp on the microstructure and impact strength of Al/SiCp composites fabricated by pressureless infiltration

The effect of SiO₂ in SiC_p and the following processing parameters on the microstructure and impact strength of Al/SiC_p composites fabricated by pressureless infiltration was investigated: Mg content in the aluminum alloy, SiC particle size, and holding time. Preforms of SiC_p in the form of rectangular bars (10 × 1 × 1 cm) were infiltrated at 1150°C in an argon→nitrogen atmosphere for 45 and 60 min by utilizing two aluminum alloys (Al-6 Mg-11 Si and Al-9 Mg-11 Si, wt.%). The results obtained show that the presence of SiO₂ in SiC affects the microstructure and impact strength of the composites significantly. When Al₄C₃ is formed, the impact strength decreases. However, a high proportion of SiC to SiO₂ limits the formation of the unwanted Al₄C₃ phase in the composites. Also, a higher content of Mg in the Al alloy lowers the residual porosity and, consequently, increases the composite strength. The impact strength grows with decrease in SiC particle size and increases considerably when the residual porosity is less than 1%. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 401–418, May–June, 2006.     

Ultrasonic evaluation of anisotropic damage in multiaxially textile-reinforced thermoplastic composites made from hybrid yarns

The basic damage and failure models of multiaxially reinforced composites with a thermoplastic matrix are presented and verified. Within the framework of continuum damage mechanics, a phenomenological model is introduced, where the damage is defined as a change in the elasticity tensor. For damage identification, a specific ultrasonic device was developed. A combination of an immersion set-up and a contact coupling device formed a system for an efficient determination of stiffness-tensor components from convenient sets of velocity measurements. Linked to a tensile machine, it allowed us to measure the anisotropic damage of the new materials group caused by tensile loading. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 2, pp. 221–234, March–April, 2006.     

Plasma effects and the modulation of white light spectra in the propagation of ultrashort, high-power laser pulses in barium fluoride

We report the results of a study of white light generation in a 7.5 cm long crystal of a high band-gap material, barium fluoride, using ultrashort (<42 fs) laser pulses over a range of values of incident laser power that extend up to more than three orders of magnitude larger than the critical power for self-focusing (P_cr). We explore white light generation and the intensity and spectral distributions within filaments that are formed as a result of the interplay of self-focusing and plasma-induced defocusing. The onset of plasma effects occurs at power levels in excess of 7 GW for ultrashort pulses in BaF₂. For incident power levels that are three orders of magnitude larger than the critical power, blue-shifting of the incident laser wavelength is observed in addition to asymmetric continuum generation. The blue shift enables us to estimate the temporal variation of the electron density in the plasma that is generated within the BaF₂ crystal. PACS 52.38.Hb; 42.65.Jx; 42.65.Tg; 33.80.Wz; 52.35.Mw     

Demineralisation of a semianthracite char with molten salts/HCl: A study by X-ray diffraction

The effects of chemical heat treatments of a semianthracite char (AC) on the composition of the mineral fraction of the material are investigated. The starting char was first treated with a mixture of LiCl/KCl or LiCl/KCl/CaO at 743, 873 or 1173 K and the products obtained were then washed thoroughly with distilled water. A small fraction of these samples were treated with 10⁻³ M HCl solution. The composition changes were studied by X-ray diffraction. The predominant mineral components initially present in the starting char are quartz, mullite, muscovite and/or kaolinite and oldhamite. The treatments of AC resulted in significant changes in the mineral fraction of the material, in particular when LiCl/KCl/CaO was used. In this case, spurrite, γ-calcium orthosilicate and gehlenite were formed, which were eliminated by treatment with 10⁻³ M HCl solution.     

双奇核188Au的准粒子带结构研究

利用在束γ谱学实验技术, 通过¹⁷³Yb(¹⁹F,4nγ)反应 布居了¹⁸⁸Au的高自旋态, 并对其准粒子带结构进行了研究. 基于实验测量结果, 对原有的双奇核¹⁸⁸Au能级纲图做了较大的修改. 通过系统性比较, 对15⁺以上的能级结构进行了讨论.