Magnetic properties of oxygenated carbon nitride films from RF-discharge in an acetylene, nitrogen, and oxygen mixture environments

Properties of oxygenated carbon nitride films have attracted the attention of physics researchers due to their magnetic and physical properties, as well as for their usefulness in the industry. The free radicals were investigated using electron paramagnetic resonance applied in the study of spin concentration due to the different mechanism of preparation of carbon nitride films by RF-discharge with different kinds of plasma. Unpaired spin concentrations, in the order of 10²⁰ per cm³, were measured and their time recombination dependency was important in those films. The films were grown by plasma enhanced chemical vapor deposition using mixtures of hydrocarbons, N₂ and O₂ in different proportions.     

Monte Carlo study of interfacial silicon suboxide layers and oxidation kinetics

A simple simulation scheme that simultaneously describes the growth kinetics of SiO₂ films at the nanometer scale and the SiO_x/Si interface dynamics (its extent, and spatial/temporal evolution) is presented. The simulation successfully applies to experimental data in the region above and below 10 nm, reproduces the Deal and Grove linear-parabolic law and the oxide growth rate enhancement in the very thin film regime (the so-called anomalous region). According to the simulation, the oxidation is governed mainly by two processes: (a) the formation of a transition suboxide layer and (b) its subsequent drift towards the silicon bulk. We found that it is the superposition of these two processes that produces the crossover from the anomalous oxidation region behavior to the linear-parabolic law.     

Synthesis and characterisation of cadmium titanium oxide thin films by sol-gel technique

Crack free, dense and transparent CdTiO₃ thin films have been prepared by sol-gel technique using titanium butoxide and cadmium acetate. The formation of the CdTiO₃ phase started from 500°C annealing temperature onwards. The complete orthorhombic structure of CdTiO₃ was formed on Silicon (100) substrate at an annealing temperature of 600°C for 5 h. As the annealing temperature increased from 600 to 700°C, we have observed the cadmium silicate phase at the interface of Si and CdTiO₃ phase. Structural, morphological and elemental evolution of these CdTiO₃ thin films produced by sol-gel synthesis were characterised by grazing incidence X-ray diffraction (GIXRD), tapping mode atomic force microscopy (TMAFM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) respectively.     

Lasing in the far IR spectral range under femtosecond optical excitation of the InAs semiconductor in a magnetic field

Generation of a coherent electromagnetic radiation in the far IR (THz) spectral range upon excitation of a semiconductor InAs crystal by 70-fs Ti: sapphire laser pulses is studied. The effect of a magnetic field of different orientation on generation in the submillimeter-wavelength range is analyzed. Placing the crystal into the magnetic field of an optimized permanent magnet with a strength of 5 kOe aligned along the surface of the semiconductor increased the power of generated radiation by a factor of six compared with that in the absence of the field. For the average pump-laser output power of 150 mW and repetition rate of 80 MHz, the average power of the THz radiation reached 100 nW. For detection of ultrashort pulses of the THz radiation, we used, for the first time, a highly sensitive uncooled optoacoustic detector, which detected signals with a power lower than 1 nW.     

Field Structure in the Cross Section of a Ferrite Inhomogeneous Anisotropic Insert of a Rectangular Waveguide

We develop a physico-mathematical model describing excitation and distribution of electromagnetic waves in an anisotropic waveguide or resonator in the three-dimensional case. We develop a theoretical approach for discretization of the Maxwell equations in an arbitrary medium in the presence of bounding walls of a waveguide or resonator. The resulting system of linear algebraic equations for the electric-field components in an inhomogeneous anisotropic medium is solved by the method of biconjugate gradient. The results of calculating the electric field lines in the cross section of an anisotropic insert of a rectangular waveguide are presented.     

A priori tests of a stochastic mode reduction strategy

Several a priori tests of a systematic stochastic mode reduction procedure recently devised by the authors [Proc. Natl. Acad. Sci. 96 (1999) 14687; Commun. Pure Appl. Math. 54 (2001) 891] are developed here. In this procedure, reduced stochastic equations for a smaller collections of resolved variables are derived systematically for complex nonlinear systems with many degrees of freedom and a large collection of unresolved variables. While the above approach is mathematically rigorous in the limit when the ratio of correlation times between the resolved and the unresolved variables is arbitrary small, it is shown here on a systematic hierarchy of models that this ratio can be surprisingly big. Typically, the systematic reduced stochastic modeling yields quantitatively realistic dynamics for ratios as large as 1/2. The examples studied here vary from instructive stochastic triad models to prototype complex systems with many degrees of freedom utilizing the truncated Burgers–Hopf equations as a nonlinear heat bath. Systematic quantitative tests for the stochastic modeling procedure are developed here which involve the stationary distribution and the two-time correlations for the second and fourth moments including the resolved variables and the energy in the resolved variables. In an important illustrative example presented here, the nonlinear original system involves 102 degrees of freedom and the reduced stochastic model predicted by the theory for two resolved variables involves both nonlinear interaction and multiplicative noises. Even for large value of the correlation time ratio of the order of 1/2, the reduced stochastic model with two degrees of freedom captures the essentially nonlinear and non-Gaussian statistics of the original nonlinear systems with 102 modes extremely well. Furthermore, it is shown here that the standard regression fitting of the second-order correlations alone fails to reproduce the nonlinear stochastic dynamics in this example.     

Mode theory of volume superimposed holograms: I. Hologram modes

The wave field arising at reconstruction of volume volume-superimposed holograms was studied taking into account the multiple wave diffraction at hologram gratings. The theory is based on the wave field concept in the form of a superposition of hologram modes. Superimposed hologram modes were found.     

Luminescent properties of Ce in MSO4 (M: Ca, Sr and Ba) and the effect of Na co-doping

The optical properties of Ce³⁺ in CaSO₄, SrSO₄ and BaSO₄ are reported. The Ce³⁺ ion shows 4f⁰5d¹→²F_5/2,²F_7/2 luminescence in all three sulphates. Co-doping with Na⁺ does not change the local surrounding of the Ce³⁺ ion, but enhances the amount of Ce³⁺ ions built in. Under optical excitation, besides the typical Ce³⁺ doublet emission in the ultraviolet spectral region, band emission around 445 nm was observed. This band emission was not assigned to emission from a Ce³⁺ centre, but to emission from an impurity-trapped exciton. Under X-ray excitation, both Ce³⁺ emission and an emission band around 380 nm was observed. This band was assigned to emission from a self-trapped exciton.     

A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.