Evolved gas analysis (EGA) of brick clays

Using a system based on non-dispersive infrared (NDIR) detectors, evolved gas analysis (EGA) was able to identify and quantify the principal volatiles produced by heating powdered samples of UK brick clays. From these results, atmospheric emissions likely to result from brick production can be predicted. In addition, EGA results for extruded brick clay test pieces are significantly different from those of powdered samples. Within an extruded brick clay body, evolved gases are contained within a pore system and evolved gas-solid phase reactions also occur. This EGA study provides further evidence on the nature of firing reactions within brick clay bodies. The qualitative and quantitative influence of heating rate — a key process condition in brick manufacture — on gas release is also outlined.Dedicated to Dr. Robert Mackenzie on the occasion of his 75th birthday     

Investigation of the chemical state of copper in Cu/SiO2 composite films by x-ray photoelectron spectroscopy

The concentration and chemical state of copper in the subsurface region of Cu/SiO₂ composite films obtained by simultaneous magnetron sputtering from two sources (Cu and SiO₂) are determined by x-ray photoelectron spectroscopy (XPS). It is established that copper in the as-grown film is primarily in the form of unoxidized atoms dispersed in a SiO₂ matrix. Annealing of the film results in practically no oxidation, but about 70% of the copper atoms condense into metallic clusters with sizes below 10 Å in the subsurface region and about 50 Å in the bulk of the film. The changes in the binding energy of core electrons, and especially in the energies of Auger electrons, are so large in this situation that photoelectron and Auger spectroscopy are efficient methods for monitoring the chemical state of this composite material.     

High quantum efficiency of intersubband transitions in coherent tunneling of electrons through asymmetric double-barrier structures

A converging perturbation series that can be summed analytically has been obtained for intersubband transitions of electrons coherently tunneling through the middle of a dimensionally quantized level in an asymmetric double-barrier structure in a high-frequency terahertz electric field. The possibility of a substantial increase in tunneling current accompanied by either absorption or emission of a photon has been demonstrated. The quantum efficiency of radiative transitions between dimensionally quantized levels can be up to 66%. Zh. éksp. Teor. Fiz. 112, 237–245 (July 1997)     

Temperature and frequency dependence of the spin-lattice relaxation times of E′1 centers in neutron-irradiated quartz glass

Results are reported for measurements of the spin-lattice relaxation times of E′₁ centers in quartz glass, produced by neutron irradiation, with the measurements made at two frequencies 9.25 and 24.0 GHz over a wide temperature interval 1.5–300 K. The experimental data are interpreted on the basis of interaction mechanisms of the spins with two-level systems with excitation energies ∼6, ∼26, and ∼420 cm⁻¹. A small modification of the existing theory allows us to explain a number of features of the observed temperature and frequency dependence of the relaxation rate. The results are compared with the data available in the literature on spin-lattice relaxation of irradiation centers in crystalline quartz and quartz glass. Fiz. Tverd. Tela (St. Petersburg) 39, 1335–1337 (August 1997)     

Excitation of bulk elastic waves at the surfaces of piezoelectric crystals with 422,622 symmetry

The problem of exciting bulk elastic waves at the surface of a piezoelectric with symmetries 422,622 has been solved by a successive approximation method. In the approximation of a fixed electric field, created at the surface of the piezoelectric crystal by a two-electrode transducer, the distributions are found for the shear wave stress and the energy flux density in the far zone. The equivalent circuit parameters for a two-electrode radiator are determined taking account of the dynamic piezoelectric correction obtained in the second approximation. The equivalent circuit parameters and the transducer loss are treated for TeO₂ crystals. A realistic possibility of using surface transducers in the development of acousto-optic modulators in the s.h.f. region is shown. Tomsk State Academy of Control Systems and Radio Electronics. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 1, pp. 8–15, January, 1997.     

玻璃陶瓷材料中Tm3+离子红外到蓝色上转换发光

系统研究了PbF2+GeO2+WO3ⅩⅣTmF3玻璃陶瓷材料中,在近红外光(1.06μm)激发下,Tm3+离子的发光特性.实验中观测到Tm3+离子的两组峰值位置分别在20920cm-1和22173cm-1的蓝色上转换发光,并证实这两组上转换发光分别与吸收三个和四个光子有关,同时建立了上转换发光的模型.为了选择最佳掺杂浓度,详细地测量了Tm3+离子峰值为20920cm-1的蓝色上转换发光强度与TmF3浓度的关系.     

非线性光纤方向耦合器孤子动力特性分析

利用变分方法,导出了双曲正割型光孤子在非线性光纤耦合器中传输时满足的动力学方程组,分析了该方程组的平衡点性态,讨论了光孤子的开关特性.指出参数|β|<2π.是能实现完全的开关操作的必要条件.     

溶胶-凝胶制备技术与新型催化材料Ⅲ.溶胶粒子表面修饰方法制备催化膜

提出用溶胶粒子表面修饰方法，结合溶胶凝胶技术制备无机催化膜．该方法的基本原理是利用合适的金属配合物在胶粒表面的吸附作用，经溶胶凝胶过程，将活性组分结合到无机膜中．实验测定结果表明：（ＮｉＥＤＴＡ）２－，ＶＯ－３，ＭｏＯ２－４，（Ｐｄ（ＮＨ３）４）２＋，ＰｄＣｌ２－４，ＰｔＣｌ２－６和ＲｈＣｌ３－６可用来修饰ＡｌＯＯＨ溶胶．以Ｐｄ／γＡｌ２Ｏ３催化膜的制备为例，经三次溶胶凝胶过程，可制得无裂缺的厚度为９μｍ的Ｐｄ／γＡｌ２Ｏ３催化膜，膜材料的平均孔直径为６ｎｍ，Ｐｄ被均匀地分布在膜的顶层，其平均粒径为２３ｎｍ．