高效甲醇水蒸气重整制氢的SBA-15改性的Cu/ZnO/Al2O3催化剂

以介孔SBA-15为结构助剂, 制备出用于甲醇水蒸气重整制氢的新型高效氧化硅掺杂的Cu/ZnO/Al₂O₃催化剂, 并与传统Cu/ZnO/Al₂O₃催化剂在相同条件下的催化性能进行了比较. 结果表明, 添加适量介孔SBA-15可显著提高催化剂的催化活性和选择性, 在大幅度提高甲醇转化率的同时有效降低了重整产气中CO的含量. 原位XRD分析证实适量介孔SBA-15的添加对传统Cu/ZnO/Al₂O₃催化剂的微结构性质可产生重要的调控作用, 从而大大改善其催化活性和制氢选择性.     

纳米γ-Fe2O3粉体的合成与磁性增强研究

采用微乳法合成出氧化铁的前驱体——纳米β-FeOOH, 分别以β-FeOOH与添加剂壬基酚聚氧乙烯醚(NP-4)以物质量的比(n)为4, 5, 100添加NP-4, 混合煅烧. 采用拉曼光谱分析了样品中炭含量及分布, 并且用透射电镜观测产物的形貌和粒径, 采用磁强计观测产物磁性的变化. 结果得出, 对n＝5或破乳所得凝胶煅烧, 所得样品皆为分散均匀的四方形颗粒状, 且为磁性明显增强的纳米氧化铁γ-Fe₂O₃. 还分别讨论了样品中炭含量以及颗粒形状对比饱和磁化强度σ_s、矫顽力、矩形比的影响.     

配合物[Pd(phen)Cl2]与腺嘌呤的键合作用研究

合成并表征了固体三元配合物[Pd(phen)Cl₂] 1. 以1和DNA的组成小分子腺嘌呤(ade)反应, 获得双核配合物单晶[Pd₂(phen)₂(ade)₂]Cl₂•4.5H₂O (2). 配合物2为正交晶系, 空间群为Pnma, 晶胞参数a＝2.1709(9) nm, b＝1.4378(6) nm, c＝1.2274(5) nm, α＝β＝γ＝90°, V＝3.8311(3) nm³, D_c＝1.729 g/cm³, Z＝4, F(000)＝2004, R₁＝0.0766, wR₂＝0.1526. phen配体以两个氮原子与钯(II)离子配位, 按生物学原子规范标号, ade以N(3), N(9)原子与钯(II)离子桥联配位, 形成双核混配型配合物.     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

一个新颖的三维异核锑(III)-镨(III)配合物[Sb2-μ4-(EDTA)2Pr(H2O)5]NO3•4H2O的合成、晶体结构及热分解研究

合成了锑-镨与乙二胺四乙酸形成的新颖三维配合物[Sb₂-μ₄-(EDTA)₂Pr(H₂O)₅]NO₃•4H₂O, 用元素分析、红外光谱、热分析及X射线单晶衍射法等进行了组成和结构表征. 结果表明该配合物属正交晶系, 空间群Pnn2; 晶胞参数: a＝1.07031(2) nm, b＝2.30805(4) nm, c＝0.72343(2) nm, V＝1.78711(7) nm³, Z＝2, D_c＝2.202 g/cm³, F(000)＝1164, μ＝2.955 mm^－1, GOF＝1.000, 最终偏离因子R₁＝0.0203, wR₂＝0.0545 [I＞2σ(I)]. 在标题化合物中, 每个镨(III)离子的配位数为9, 与五个水分子中的五个氧原子和四个羧基氧原子配位, 形成三帽三角棱柱空间配位多面体. 锑(III)与EDTA离子中的四个氧原子和两个氮原子配位, 在赤道平面上有一孤对电子. 同时讨论了配合物的热分解过程.     

超声波处理对球形β-Ni(OH)2结构及电化学性能的影响

A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.     

基于一次性薄层色谱电极高选择电化学发光分析法测定Ni(II)的研究

基于一种新的电极制作方法, 研制了具有薄层色谱分离功能的一次性薄层色谱电极. 结合该电极的分离、保留分析物于电极表面一定空间区域的色谱分离能力与电极表面电化学发光信号的空间分辨能力, 实现了分析物的高效分离与原位高灵敏度电化学发光(ECL)检测, 建立了电化学发光分析方法与薄层色谱分离方法联用的新技术. 并以Ni^2＋离子为代表探讨了这一方法的可行性和分析特性. 在最佳的实验条件下, 该方法测定Ni^2＋离子的线性范围为5.0× 10^－9～5.0×10^－6 g/mL, 检出限为1.5×10^－9 g/mL, 相对标准偏差为2.8% (c＝1.0×10^－6 g/mL, n＝11).     

单壁碳纳米管用做超级电容器的电极材料

摘要本文研究了采用电弧放电法大规模合成的单壁碳纳米管（SWNT）用作超级电容器电极材料的电化学性能。N₂吸脱附测试表明SWNT既有发达的微孔，又有发达的中孔，其比表面为435 m².g^-1。由于既有双电层电容，又有表面官能团产生的准电容，采用浓硝酸处理后的单壁碳纳米管在水相电解液中的比电容达到105 F/g。基于SWNT的超级电容器也有着良好的充放电可逆性和循环稳定性。     

双-单齿芳香酰胺型配体桥联La3＋一维配位聚合物的合成与晶体结构

通过硝酸镧和双-单齿芳香酰胺型配体L {L＝1,4-双[(2'-苄胺甲酰基苯氧基)-甲基]苯}之间的反应得到了配位聚合物{[La(NO₃)₃]₂•L₃}_n, 并用X射线单晶衍射测定了配合物的晶体结构. 配合物为三斜晶系, _P1空间群, 晶胞参数a＝1.1298(2) nm, b＝1.2689(1) nm, c＝2.1030(3) nm, α＝81.189(9)°, β＝80.95(1)°, γ＝65.832(9)°, V＝2.7032(6) nm³, Z＝2, R＝0.0267, wR＝0.0679, La^3＋为9配位, 呈变形的三帽三角棱柱配位构型. 配合物通过配体的桥联作用形成一维环链相间的配位聚合结构, 由于相邻链间不存在氢键和π-π堆积作用, 所以配合物是以单链形式堆积排列.     

新型吡啶[2',1': 5,1]吡唑[4, 3-d]嘧啶-4-酮类化合物的合成及其对PDE5酶的抑制活性研究

设计、合成出了新型吡啶并吡唑并嘧啶酮类化合物。目标化合物的生物活性评价结果显示，该类化合物对血小板中的PDE5酶具有较强的拟制活性，但略弱于西地那非。