Neutron diffraction study on composite compound Nd2Co7

The crystallographic and the magnetic structures of the composite compound Nd₂Co₇ at 300 K are investigated by a combined refinement of X-ray diffraction data and high-resolution neutron diffraction data. The compound crystallizes into a hexagonal Ce₂Ni₇-type structure and consists of alternately stacking MgZn₂-type NdCo₂ and CaCu₅-type NdCo₅ structural blocks along the c axis. A magnetic structure model with the moments of all atoms aligning along the c axis provides a satisfactory fitting to the neutron diffraction data and coincides with the easy magnetization direction revealed by the X-ray diffraction experiments on magnetically pre-aligned fine particles. The refinement results show that the derived atomic moments of the Co atoms vary in a range of 0.7 μ_B-1.1 μ_B and the atomic moment of Nd in the NdCo₅ slab is close to the theoretical moment of a free trivalent Nd³⁺ ion, whereas the atomic moment of Nd in the NdCo₂ slab is much smaller than the theoretical value for a free Nd³⁺ ion. The remarkable difference in the atomic moment of Nd atoms between different structural slabs at room temperature is explained in terms of the magnetic characteristics of the NdCo₂ and NdCo₅ compounds and the local chemical environments of the Nd atoms in different structural slabs of the Nd₂Co₇ compound.     

美国对清洁能源研发的探讨

美国能源部高级研究计划署(the Depart ment of Energy’s Advanced Research Projects Agency-Energy,简称为ARPA-E)在2011年2月28日到3月2日召开了第二届年会.与会人员达2000多人.在会上有许多人发表了重要的讲话,其中有前加州州长A.Schwarzenegger,现任能源部长朱棣文和ARPA-E主任A.Majum-dar等.A.Schwarzenegger州长在会议上说,根据我的经验,新能源的研发不仅能使美国在国际上保持一定的竞争力,而且能使美国的经济持续增长并在国内提供充足的就业机会.他还说,加州的政策已经使其人均用     

SJTU-1型医用超声诊断设备声输出测量系统的研制

本系统地研究了医用超声诊断设各声输出公布要求的国家标准GB16846—1997(idt.IEC61157—1992)中规定的主要指标的定义和测量方法，给出了相关的计算公式。介绍了为实施国标而研制的专用测量设备SJTU-1型医用超声设备声输出测量系统的工作原理、系统构成和技术性能。     

中国探月工程

 人类对月球的向往自古有之，我们对月球的探索从未停止。2004年，中国正式开展月球探测工程，探月工程又命名为“嫦娥工程”。工程规划分为三期，简称为“绕、落、回”。     

双脉冲电子束源实验

2MeV直线感应加速器注入器系统由电子束产生器和脉冲功率系统组成。电子束产生器包括由感应腔组成的阴极电压叠加器、阳极电压叠加器和真空二极管及束输运系统。脉冲功率系统则包含初级功率源Marx、次级功率源Blumlein线和触发系统，其作用是为感应腔提供一个具有数十纳秒平顶宽度的高压脉冲，激发感应腔在感应腔间隙上获得一个加速电场。在2MeV注入器功率系统中，4个Blumlein线的充气开关是由发散装置的输出触发信号进行导通控制的。通过控制发散输出触发信号到达Blumlein线开关的时间，即可以实现Blumlein线开关在不同时间内触发导通，使Blumlein线依据所设定的时间顺序输出激励脉冲，从而在真空二极管上获得高压脉冲串。由于功率系统采用的是182C结构，即一根Blumlein线驱动两个感应腔，因此最多可以实现四脉冲串列。     

电感耦合等离子体原子发射光谱法测定硅铝铁合金中多种元素的优化研究

应用电感耦合等离子体原子发射光谱 (ICP AES)法 ,对硅铝铁合金中的Al,Fe ,Ca,Cr,Mn ,Ni,Si和Ti元素进行了测定。研究了ICP AES的操作条件和溶样方法 ,确定了适宜的实验条件 ,如对仪器参数和共存元素对信号的影响进行了研究。将实验条件优化后 ,使用该方法测定硅铝铁合金中多种元素 ,标准钢样测定结果与推荐值相符。对各种元素的检出限分别为Al(0 0 2 9μg·mL- 1 ) ,Fe(0 0 0 4 μg·mL- 1 ) ,Ca(0 0 0 75 μg·mL- 1 ) ,Cr(0 0 0 15 μg·mL- 1 ) ,Mn(0 0 0 0 9μg·mL- 1 ) ,Ni(0 0 0 2 7μg·mL- 1 ) ,Si(0 0 4 5 μg·mL- 1 )和Ti(0 0 0 3μg·mL- 1 )。对所测元素 ,测定结果的相对标准偏差 (n =6 )在 0 3%～ 1 8%之间 ,加入标准溶液的回收率在96 7%～ 10 2 9%范围。测定合金样品中高含量硅的结果与标准化学 (重量 )法的结果也相符。该方法的特点是数据可靠 ,简便可行和易于推广。     

Design of a reentrant double staggered ladder circuit for V-band coupled-cavity traveling-wave tube

The reentrant double staggered ladder slow-wave structure is employed in a high-power V-band coupled-cavity traveling-wave tube. This structure has a wide bandwidth, a moderate interaction impedance, and excellent thermal dissipation properties, besides the easy fabrication. A well-matched waveguide coupler is proposed for the structure. Combining the design of attenuators, a full-scale three-dimensional circuit model for the V-band coupled-cavity traveling-wave tube is constructed. The electromagnetic characteristics and the beam--wave interaction of this structure are investigated. The beam current is set to be 100 mA, and the cathode voltage is tuned from 16.8 kV to 15.8 kV. The calculation results show that this tube can produce a saturated average output power over 100 W with an instantaneous bandwidth greater than 1.25 GHz in the frequency ranging from 58 GHz to 62 GHz. The corresponding gain and electronic efficiency can reach over 32 dB and 6.5%, respectively.     

β-delayed neutron decay of 21N

The β-delayed neutron and γ spectra of neutron-rich nucleus ²¹N using β-γ and β-n coincidence measurements were presented in this paper. Thirteen new neutron groups ranging from 0.28 MeV to 4.98 MeV and with a total branching ratio 88.7±4.2% were observed. One γ transition among the excited states of ²¹O, and four γ transitions among the excited states of ²⁰O were identified in the β decay chain of ²¹N. The ungated half-life of 83.8±2.1 ms was also determined for ²¹N.     

柔性有机电致发光器件导电基板的工艺性能

在聚对苯二甲酸乙二醇酯(PET)柔性衬底上采用直流磁控溅射技术制备了氧化铟锡(ITO)透明导电薄膜,研究了衬底温度、溅射功率和溅射压强等工艺条件对薄膜光电性能的影响,并利用原子力显微镜(AFM)表征了衬底及ITO薄膜的表面形貌。结果表明,在PET衬底温度50℃、溅射功率100W和溅射压强2.66×10-1Pa的条件下,可以得到低方阻(50Ω/□)和高透过率(>90%)的透明导电薄膜。以此柔性ITO衬底为阳极,制备了结构为PET/ITO/NPB/Alq3/Mg∶Ag的柔性有机电致发光器件,在驱动电压为13V时,器件的发光亮度达到了2834cd/m2。     

采用7.5 μm中红外量子级联激光器的痕量甲烷气体检测仪

一种具有高稳定性和高敏感度的紧凑型仪器,能精确、实时、实地连续测量和显示环境空气中的痕量甲烷(CH₄)浓度。仪器采用了已集成热电制冷器激射波长为7.5μm的法布里-珀罗量子级联激光器(QCL)在室温脉冲工作模式下的最新技术,以覆盖CH₄位于ν₄附近基频特征吸收谱带。同时,采用高品质液氮制冷碲镉汞中红外探测器,配合全反射镀金椭球反射镜一同使用,在20 cm单路径开放式光路吸收气室环境下,确保被测甲烷气体浓度为200 μmol·mol-1的实验条件下保持稳定度高达5.2×10-3。此仪器所集成的软件算法通过时间鉴别电子技术实现对QCL控制,能够在无需校准的情况下,提供连续痕量甲烷气体检测。实验表明,仪器可以用于环境监测中的实地痕量气体测量,并且操作人员可以通过替换在不同波长下运行的QCL来测量其他气体。