基于ARM处理器的运动目标检测与跟踪系统

运动目标的检测及跟踪技术广泛应用于军事与民用领域。传统基于PC的目标跟踪系统不能满足对体积、功耗及便携性的需求,基于ARM处理器S3C2440A和嵌入式Linux操作系统构建了一个比较完整、实用的目标跟踪系统。该系统利用摄像头采集运动目标图像,处理器进行数字图像处理,LCD显示跟踪目标。阐述了实现原理及图像获取、目标检测、图像分割和目标跟踪算法程序流程。通过实际测试,该系统能满足对低速运动目标的检测、识别和跟踪,且具有较好的实时性和稳定性。     

Research on calibration method in lab of direct solar channels of Sun photometer

We develop a new calibration method in lab by measuring the absolute spectral irradiance responsivity of Sun photometer sun channel. The absolute power responsivity of Sun photometer is obtained when a white laser double monochromator system serve as a source, and a standard transfer detector calibrated against cryogenic absolute radiometer is assembled to measure the absolute power of laser beam. The effective area of aperture is measured through laser raster scanning method, and the relative spectral irradiance responsivity of the corresponding channel is obtained by using tungsten-halogen lamps double monoehromator system. On the basis of the above results, the top of the atmosphere responsive constants V0 （500, 675, and 870 nm） are obtained by integration with extraterrestrial solar spectral irradiance data. Comparing the calibration results with that of CIMEL, France in November 2011, the relative differences are 4.38%, 2.23%, and 2.45%, respectively. The calibration uncertainty reaches to 2.048×10^-2, which shows a remarkable consistency with the Langley plot method. Further, our scheme can overcome the limits of space and atmospheric conditions which are only available at a high-altitude calibration site in particular date. The advantages lie in not only shortening the experiment period but also being of high precision. This new scheme definitely plays an important role in supporting the current and future sun photometry calibration activities which are significant to earth observation.     

Simulation of beam gas coulomb scattering in HALS

In conventional research on beam gas coulomb scattering(BGCS), only the related beam lifetime using the analytical method is studied. In this paper, using the particle-in-cell Monte Carlo collisions(PIC-MCC) method,we not only simulated the beam lifetime but also explored the effect of BGCS on the beam distribution. In order to better estimate the effect on particle distribution, we study the ultra-low emittance electron beam. Here we choose the He Fei Advanced Light Source. By counting the lost particles in a certain time, the corresponding beam lifetime we simulated is 4.8482 h/13.8492 h in x/y, which is very close to the theoretic value(5.0555 h /13.7024 h in x/y).By counting the lost particles relative to the collided particles, the simulated value of the loss probability of collided particles is 1.3431e-04, which is also very close to the theoretical value(1.3824e-04). Besides, the simulation shows there is a tail in the transverse distribution due to the BGCS. The close match of the simulation with the theoretic value in beam lifetime and loss probability indicates our simulation is reliable.     

Closely packed dense frequency selective surface

In order to realize wideband filtering properties of frequency selective surface （FSS）, FSS of closely packed elements is presented. The Y loop elements are chosen as the graphics elements. Based on the spectral domain method, the frequency response is analyzed for different incident angles and polarizations. The result of the numerical analysis shows that the dense FSS has wide passband with better independence of angle and polarization.     

华南沿海黄色粉土沉积的激光粒度分析及其成因讨论

在华南沿海地区的低矮丘陵及台地上,广泛发育一套黄色粉土堆积。对该区7个典型剖面进行系统的激光粒度分析,并与典型黄土以及研究区常见的海、河相沉积进行对比。结果表明,华南沿海各黄色粉土剖面均以10～50 μm的粗粉砂为众数粒组,<5 μm的粘粒为次众粒组,分别对应风成黄土的“基本粒组”和“挟持粒组”,岩性均属于粘土质粉砂。样品的粒度参数、粒度散点图、频率分布曲线、粒度指数特征均显示为典型的风成成因。粒度判别分析结果为负值,同样证实了黄色粉土的风成特性。华南沿海黄色粉土的各项粒度特征指标及其所反映的沉积类型、沉积环境均与我国典型黄土具有较好的可比性,而与研究区的海、河相沉积截然不同。     

双重Q62重标度模型的重标度参数经验公式

结出了双重Q^2重标度模型的重标度参数经验公式,其中建立了重标度参数ξV,ξS及ξG与原子核平均结合能之间的联系,利用这套公式可以给出A≥12的所有核的重标度参数值,进而可以采用这些重标度参数值计算有关核过程做出预言。     

超高速炸药加速器炮口弹丸速度的测量

炸药驱动器超高速(>3000m/s)弹丸速度的测量是超高速发生器及超高速碰撞现象研究等领域内一个必不可少的环节,本文在传统电测法及X光闪先照相技术的基础上,提出了改进的测量技术,使测量中尽量避免各种因素对测试的干扰,成功地获得了弹丸的炮口速度。实验表明,该技术为超高速驱动器及超高速撞击现象研究提供了一种可靠而方便的测试手段。     

高温应变下的晶界湮没机理的晶体相场法研究

应用晶体相场方法研究高温应变下的预熔化晶界位错湮没机理. 结果表明, 原预熔化晶界上的位错在应变作用下发生分离运动, 形成新晶界, 即亚晶界. 该过程的实质是生成了亚晶粒; 亚晶界的迁移过程的本质是亚晶粒长大、吞噬旧晶粒的过程; 亚晶界之间的湮没是亚晶粒完全吞噬旧晶粒过程的结束, 体系转变成为单个晶粒结构. 根据原子密度序参数沿x和y方向的投影值随应变量的变化特征, 可以揭示出高温应变作用下, 预熔化亚晶界相遇湮没的本质是两对极性相反的偶极子位错对发生二次湮没, 该湮没的微观过程是通过位错连续二次滑移湮没而实现的, 其湮没的速率较低温时的湮没速率要小许多.     

Light-scattering model for aerosol particles with irregular shapes and inhomogeneous compositions using a parallelized pseudo-spectral time-domain technique

To improve the modeling accuracy of radiative transfer, the scattering properties of aerosol particles with irregular shapes and inhomogeneous compositions should be simulated accurately. To this end, a light-scattering model for nonspherical particles is established based on the pseudo-spectral time domain(PSTD) technique. In this model, the perfectly matched layer with auxiliary differential equation(ADE-PML), an excellent absorption boundary condition(ABC) in the finite difference time domain generalized for the PSTD, and the weighted total field/scattered field(TF/SF) technique is employed to introduce the incident light into 3 D computational domain. To improve computational efficiency, the model is further parallelized using the Open MP technique. The modeling accuracy of the PSTD scheme is validated against Lorenz–Mie, Aden–Kerker, T-matrix theory and DDA for spheres, inhomogeneous particles and nonspherical particles, and the influence of the spatial resolution and thickness of ADE-PML on the modeling accuracy is discussed as well. Finally, the parallel computational efficiency of the model is also analyzed. The results show that an excellent agreement is achieved between the results of PSTD and well-tested scattering models, where the simulation errors of extinction efficiencies are generally smaller than 1%, indicating the high accuracy of our model. Despite its low spatial resolution, reliable modeling precision can still be achieved by using the PSTD technique, especially for large particles. To suppress the electromagnetic wave reflected by the absorption layers, a six-layer ADE-PML should be set in the computational domain at least.