Conformational dynamics of a bispyridinium cyclophane

A complete study of the conformational behavior of 4,8-diaza-3(1,4),9(4,1)-dipyridina-1,6(1,4)-dibenzenacyclodecaphan-3(1),9(1)-bis(ilium) bishexafluorophosphate is described. This study allows us to conclude that the process observed by which the different chemical shifts of the pyridinium protons show coalescence at a high-temperature 1H NMR is the rotation around the C-N bond, whereas the conformational equilibrium between the four conformers is produced at low temperature.     

Evaluating the significance threshold in robustness testing. A critical discussion on the influence of time in molecular fluorescence spectrometry

Robustness experiments are performed in analytical chemistry to assess the behaviour of an analytical procedure under conditions slightly different from those of the experimental optimum. This work presents a study of robustness applied to a previously proposed fluorescent methodology using two replicated 2(7-4) saturated fractional factorial designs. A comparison is established between three different ways to test the significance of the effects of the variables involved on the response signal. Critical discussions about the most appropriate threshold to be introduced when testing for significance of the factors and the influence of the time necessary to carry out the experiments are included.     

Primary and secondary relaxations in bis-5-hydroxypentylphthalate revisited

The molecular structure of bis-5-hydroxypentylphthalate (BHPP) is like dihexyl phthalate but having appended to it two hydroxyl end groups, which contribute additional dipole moments and capacity for hydrogen-bond formation. In a previously published dielectric study of the primary and secondary relaxations of BHPP, it was found that all the dynamic properties are normal except for the anomalously large width of the primary relaxation loss peak. There are two secondary relaxations, the relaxation time of the slower one increases with increasing pressure, whereas that of the faster one is practically insensitive to pressure. Hence, the slower secondary relaxation is the "universal" Johari-Goldstein (JG) [J. Chem. Phys. 53, 2372 (1970); 55, 4245 (1971)] relaxation in BHPP. All is well except if the observed large width of the primary relaxation were an indication of a corresponding large coupling parameter n=0.45 in the coupling model. Then the predicted relations between the primary relaxation time tau(alpha) and the JG relaxation time tau(JG) found previously to hold in many glass formers would be violated. It was recognized that this singular behavior of BHPP is likely due to broadening of the primary loss peak by the overlapping contributions of two independent dipole moments present in BHPP, and the actual coupling parameter is smaller. However, at the time of publication of the previous work there were not enough data to support this explanation. By making broadband dielectric measurements of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) that have chemical structures closely related to BHPP but with only one dipole moment, we show that all their dynamic properties are almost the same as BHPP but the widths of their primary relaxation loss peaks are significantly narrower corresponding to a smaller coupling parameter n=0.34. The new data presented here indicate that the coupling parameter of BHPP is about the same as DBP and DOP, and the predicted relations between tau(alpha) and tau(JG) of BHPP are brought back in agreement with the experimental data.     

Surface activity of thymol: implications for an eventual pharmacological activity

In the present work, we studied the ability of thymol to affect the organization of model membranes and the activity of an intrinsic membrane protein, the GABA(A) receptor (GABA(A)-R). In this last aspect, we tried to elucidate if the action mechanism of this terpene at the molecular level, involves its binding to the receptor protein, changes in the organization of the receptor molecular environment, or both. The self-aggregation of thymol in water with a critical micellar concentration approximately = 4 microM and its ability to penetrate in monomolecular layers of soybean phosphatidylcholine (sPC) at the air-water interface, even at surface pressures above the equilibrium, lateral pressure of natural bilayers were demonstrated. Thymol affected the self-aggregation of Triton X-100 and the topology of sPC vesicles. It also increased the polarity of the membrane environment sensed by the electrochromic dye merocyanine. A dipolar moment of 1.341 Debye was calculated from its energy-minimized structure. Its effect on the binding of [3H]-flunitrazepam ([3H]-FNZ) to chick brain synaptosomal membranes changed qualitatively from a tendency to the inhibition to a clear activatory regime, up on changing the phase state of the terpene (from a monomeric to a self-aggregated state). Above its CMC, thymol increased the affinity of the binding of [3H]-FNZ (K(d-control)= 2.9, K(d-thymol)= 1.7 nM) without changing the receptor density (B(max-control)= 910, B(max-thymol)= 895 fmol/mg protein). The activatory effect of thymol on the binding of [ [3H]-FNZ was observed even in the presence of the allosteric activator gamma-aminobutyric acid (GABA) at a concentration of maximal activity, and was blocked by the GABA antagonist bicuculline. Changes in the dipolar arrangement and in the molecular packing of GABA(A)-R environment are discussed as possible mediators of the action mechanism of thymol.     

Formation and Structure of [Al_(13)(μ_3-OH)_6(μ_2-OH)_6(μ_2-OH)_(12)(H_2O)_(24)]Cl_(15)·13H_2O

1 INTRODUCTION At present, the polyaluminium compounds are mainly studied by single-crystal X-ray diffraction method to obtain the components, structures and exis- tence forms of aluminium in hydrolysis system, and then hydrolysis courses and mechanisms of each hydrolytic polyaluminium cation could be further dis- closed[1～5]. Generally, the single crystals suitable for X-ray diffraction are obtained from the crystallization of polyaluminium cations into sulfates or selenates. Following …     

Synthesis of a deca-lithium cage containing an [(RN)2As(mu-NR)As(NR)2]4- tetraanion; a homologue of group 15 trianions of the type [E(NR)3]3-

The novel, deca-lithium cage [(mtaNHLi)(As2(Nmta)5)-Li(4).2thf]2 (1) (mtaN = 5-methylthiazolyl, C4H4N2S) contains an imido-bridged tetraanion [(mtaN)2As(mu-Nmta)-As(Nmta)2]4-, which represents a new type of multi-functional imido group 15 ligand framework (homologous with group 15 anions of the type [As(NR)3]3-).     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Time-resolved laser-induced plasma spectrometry for determination of minor elements in steelmaking process samples

A pulsed Nd:YAG laser operating on the fourth (266 nm) and second (532 nm) harmonics has been used to generate plasmas on the target surface in air at atmospheric pressure. The influence of wavelength on quantitative analysis of 4 minor elements in stainless steel samples (Si, Ti, Nb and Mo) was investigated. Stainless steel samples with different elemental concentrations were prepared and analyzed by laser-induced plasma spectrometry (LIPS). The effect of laser wavelength on analytical figures of merit (calibration curves, correlation coefficients, linear dynamic ranges, analytical precision, and accuracy values) was found to be negligible when internal standardization (an Fe line) and time-resolved laser-induced plasma are employed. For both wavelengths, the calibration curves presented a good linearity and an acceptable linear dynamic range in the concentration interval investigated. For the four elements studied, limits of detection lower than 150 microg g(-1) were achieved. To evaluate the influence of wavelength on precision and accuracy, a set of fifteen high-alloyed steel samples from different stages of steelmaking process have been analyzed. Finally, the long-term stability of the analytical measurements for Mo with 532 nm wavelength has been discussed. RSD values were lower than 5.3% for the elements studied.     

难降解有机废水的催化氧化法处理

催化氧化法可通过多种途径来加强传统的化学法处理效果，目前已成为难降解有机废水处理的一项重要新技术。本文介绍了光催化氧化法、均相氧化法、多相氧化法(包括电催化氧化法)以及超临界水氧化技术的国内外研究现状及特点，并对其在有机废水中的应用情况和发展前景作了扼要评述。     

A new method for obtaining adsorption isotherms on colloidal suspensions via electrokinetic sonic amplitude measurement

The standard methods for obtaining adsorption isotherms on colloidal suspensions are usually very time consuming and involve a large number of steps and assumptions that increase the experimental errors. In this work, an alternative method is proposed to evaluate the adsorption behavior of electrosteric-stabilized systems based on electrokinetic sonic amplitude signal measurements. The new method, entitled "zeta-sorption", is noticeably less time-consuming when compared to conventional procedures but showed great precision and reliability confirmed by comparison with data obtained from conventional routes on alumina-polyacrylate and alumina-citric acid aqueous suspensions. The experimental conditions that restrict the applicability of the new method were identified and justified by discussing the possible ion exchanges.