压气机叶栅壁面拓扑和二次流结构分析

本文从涡动力学原理出发，根据实验测量和流场显示结果，对压气机平面叶机的壁面拓扑和叶栅二次流结构进行了研究．由叶栅壁面拓扑分析和二次流结构可知，叶栅的通道涡较强，出口集中脱落涡和角区分离泡的存在，造成了叶栅两端区较高的二次流损失，并且随叶栅来流冲角的提高，旋涡出现破裂，二次流损失进一步提高．     

差动光程差倍增法测量微小位移

基于差动光程差倍增法将微小位移转化为多倍光程差,通过电桥光电转换电路,得到干涉条纹数的变化.采用差动干涉方法,提高了光程改变量与位移量的比例,使微小位移的测量精度提高到亚微米量级.     

苯乙烯-马来酸酐自由基共聚反应 (Ⅰ)苯乙烯-马来酸酐电荷转移络合反应

电荷转移络合反应机理是研究苯乙烯－马来酸酐自由基交替共聚反应机理的关键。本文简述了苯乙烯－马来酸酐电荷转移络合反应的研究进展。     

用TREF方法分离聚烯烃共混物

用ＴＲＥＦ方法分离聚烯烃共混物徐君庭，封麟先，杨士林（浙江大学高分子科学与工程学系，杭州，３１００２７）关键词升温淋洗分级，聚烯烃，共混物升温淋洗分级（ＴＲＥＦ）方法是８０年代发展起来的，它按结晶度将聚合物分级［１］，目前主要用于聚烯烃的分级［２，３...     

不对称茂金属[Me~2C(Cp)(Ind)]ZrCl~2催化剂制备支化聚乙烯的 研究

本文报道以[Me~2C(Cp)(Ind)]ZrCl~2为主催化剂,MAO为助催化剂,仅以乙烯为单体制备支化聚乙烯的结果。     

Al2O3/SnO2 Co-Nanoparticle Modified Grafted Collagen for Improving Thermal Stability and Infrared Emissivity

Al2O3/SnO2 co-nanoparticles were prepared with a modified sol-gel technique followed by a thermal treatment process. With these co-nanoparticles the grafted collagen-Al2O3/SnO2 nanocomposites were obtained using a supersonic dispersion method. X-ray diffraction, FT-IR analysis, transmission electron microscopy, TGA/DTA and infrared emissivity test were performed to characterize the resulting nanoparticles and nanocomposites, respectively. The Al2O3/SnO2 co-nanoparticles showed a narrow distribution of size between 20-40 nm and could be uniformly absorbed on the tri-helix scaffolds of the grafted collagen without any aggregation. The nanocomposites possessed better thermal stability and substantially lower infrared emissivity than the grafted collagen and Al2O3/SnO2 co-nanoparticles with an increase of degradation temperature from 39 to 210 ℃ and a decrease of infrared emissivity from 0.850 of the grafted collagen and 0.708 of the Al2O3/SnO2 co-nanoparticles to 0.424, which provided a potential application of the nanocomposites to areas such as photoelectronics.     

1-辛烯Ziegler-Natta聚合的活性中心多分散性——分子量分布及动力学的研究

本文通过对TiCl_3-Al(C_2H_5)_3聚合1-辛烯产物的双峰型分子量分布曲线用Schulz函数进行拟合、分峰处理,发现这种双峰型分布中的高分子量峰部分由一种活性中心生成,低分子量峰部分则由至少两种活性中心生成.将不同转化率时聚辛烯的分子量分布分峰拟合数据与聚合速率、活性中心数等测定数据相结合,得到了高分子量和低分子量两部分产物相应的活性中心上各自的动力学参数(增长速率常数、活性中心数、链转移常数等)及各自的聚合速率曲线,从而证实了多种活性中心的存在、它们催化特性的差异及与聚合物分子量分布增宽的关系.     

VOCl_3/Et_3Al_2Cl_3/CCl_4溶剂体系催化乙烯丙烯共聚

本文以VOCl_3/Et_3Al_2Cl_3为催化剂,在CCl_4溶剂中进行乙烯共聚反应。在聚合过程中,发生一异常的颜色突变现象。颜色突变后,体系催化聚合生成分子量很低的产物。从聚合物的结构表征及机理探讨表明:颜色突变后,体系产生了新的活性中心,催化机理发生了转变——由配位机理转变为阳离子机理。     

乙醇合成丁二烯反应中液相产物的气相色谱分析

进行了用甘油柱和硅油柱串联以分离乙醇合成丁二烯液相产物中的副产物的研究.首先在甘油柱中将样品内大量乙醇和水同其他组分分离,井用反吹法将乙醇和水冲出柱外,其他组分进入硅油柱进一步被分离.通过颜色反应、化学处理和假设组分三种方法,鉴定出副产物中含有乙醛、乙醚、丙酮、戊醛、丁醛和乙酸乙酯等化合物;对前四种物质还进行了定量分析.     

~(13)C-NMR STUDY OF ETHYLENE-1-OCTENE COPOLYMERS

A ~(13)C-NMR method is presented for a quantitative determination of the respective monomercomposition and sequence distributions in ethylene-1-octene copolymers prepared with supportedtitanium/magnesium catalyst. On the basis of the sequence distributions, the ethylene-1-octenecopolymerization mechanism was studied. It was found that the observed sequence distributions inethylene-1-octene copolymers are satisfactorily predicted by the two-site model M/M,in whichthe copolymerization proceeds according to first-order Markovian statistics at the two differentsites.