Solid state reaction synthesis of filled skutterudite compounds (Ce or Y)yFexCo4-xSb12 and the effect of filling atoms Ce or Y on lattice thermal conductivity

The synthesis of filled skutterudite compounds (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12), through a solidstate reaction using chloride of Ce or Y,high purity powder of Co, Fe, and Sb as starting materials,was investigated. (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12) (x=0--1.0, y=0--0.15) compounds were obtained at850--1 123 K. The results of Rietveld analysis demonstrate that (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_12synthesized by a solid state reaction possesses a filled skutterudite structure. The filling fraction ofCe or Y obtained by Rietveld analysis agrees well with the composition obtained by chemicalanalysis. The lattice constant of (Ce)_y(Fe)_x(Co)_(4x)(Sb)_(12) increases with increasing substitution of Fe at Cosites, and with an increasing Ce filling fraction in the Sb-dodecahedron voids. The lattice thermalconductivity of (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12) decreases significantly with an increasing Ce or Y fillingfraction in the voids and with substitution of Fe at Co sites.     

A digital filtering scheme for SQUID based magnetocardiography

Considering the properties of slow change and quasi-periodicity of magnetocardiography (MCG) signal, we use an integrated technique of adaptive and low-pass filtering in dealing with two-channel MCG data measured by high $T_{\rm c}$ SQUIDs. The adaptive filter in the time domain is based on a noise feedback normalized least-mean-square (NLMS) algorithm, and the low-pass filter with a cutoff at 100Hz in the frequency domain characterized by Gaussian functions is combined with a notch at the power line frequency. In this way, both relevant and irrelevant noises in original MCG data are largely eliminated. The method may also be useful for other slowly varying quasi-periodical signals.     

X-ray observations of tungsten wire array Z-pinch implosions on QiangGuang-1 facility

Z-pinch experiments with two arrays consisting, respectively, of 32 4-μm- and 6-μm-diameter tungsten wires have been carried out on QiangGuang-1 facility with a current rising up to 1.5MA in 80ns. At early time of implosion, x-ray framing images show that the initial emission comes from the central part of arrays, and double clear emission rings, drifting to the anode and the cathode at 5×10⁶cm/s and 2.4×10⁷cm/s respectively, are often produced near the electrodes. Later, in a 4-μm-diameter tungsten wire array, filamentation caused by ohmic heating is prominent, and more than ten filaments have been observed. A radial inward shift of arrays starts at about 30\,ns earlier than the occurrence of the x-ray peak power for both kinds of arrays, and the shrinkage rate of emission region is as high as 1.7×10⁷cm/s in a 4-μm-diameter tungsten wire array, which is two times higher than that in a 6-μm one. Emission from precursor plasmas is observed in implosion of 6-μm-diameter tungsten wire arrays, but not in implosion of a 4-μm-diameter tungsten wire array. Whereas, in a 4-μm-diameter tungsten wire array, the soft x-ray emission shows the growth of m=1 instability in the plasma column, which is caused by current. The reasons for the discrepancy between implosions of 4-μm- and 6-μm-diameter tungsten wire arrays are explained.     

脉冲激光沉积BNT和KNN系陶瓷薄膜的比较研究

利用脉冲激光沉积技术(PLD),在不同的制备工艺条件下,分别在Pt/Ti/SiO2/Si基片上制备了Bi0.5Na0.5TiO3(BNT)系列的Bi0.5(Na0.7K0.2Li0.1)0.5TiO3(BNKLT)和K0.5Na0.5NbO3(KNN)系列的Li0.04(Na0.5K0.5)0.96(Nb0.775Ta0.225)O3(KNNLT)无铅压电陶瓷薄膜,并利用X射线衍射仪(XRD)、扫描电镜(SEM)和原子力显微镜(AFM)对薄膜的晶体结构及表面形貌进行了比较研究.研究结果表明:薄膜的衬底温度、沉积室的氧气压力和薄膜的热处理温度对BNT和KNN薄膜结构和形貌都有较大影响,且影响程度不同;在最佳制备工艺参数下,利用PLD制备的BNT和KNN无铅压电陶瓷薄膜都具有精细的表面结构.     

黄花倒水莲皂甙Reinioside C在大鼠体内代谢产物的鉴定

为了探讨五环三萜皂甙ReiniosideC在大鼠体内代谢产物的结构,单剂量口服ReiniosideC,5h后放血处死,用制备型高效液相色谱方法对血液和各脏器进行提取分离,从大肠内容物和粪中,分离得到了7种代谢产物.用FAB-MS,¹H NMR和¹³C NMR方法鉴定了它们的结构.     

Enhanced pulse compression induced by the interaction between the third—order dispersion and the cross—phase modulation in birefringent fibres

In this paper,we report on the enhanced pulse compression due to the interaction between the positive third-order dispersion (TOD) and the nonlinear effect (cross-phase modulation effect) in birefringent fibres.Polarization soliton compression along the slow axis can be enhanced in a birefringent fibre with positive third-order dispersion,while the polarization soliton compression along the fast axis can be enhanced in the fibre with negative third-order dispersion.Moreover,there is an optimal third-order dispersion parameter for obtaining the optimal pulse compression.Redshifted initial chirp is helpful to the pulse compression,while blueshifted chirp is detrimental to the pulse compression.There is also an optimal chirp parameter to reach maximum pulse compression.The optimal pulse compression for TOD parameters under different N-order solitons is also found.     

一种由自由电子能带模型计算费米能级的方法

对面心立方（fcc)、体心立方（bcc)和六角密堆积（hcp)三种不同结构的晶体,在假设它们的原胞中包含8个价电子并将价电子近似为自由电子的情况下,采用“自由电子气理论”和“自由电子能带模型”,研究其根据费米球确定的费米能级EF与根据自由电子能带模型计算的平均键能Em。研究结果表明,由自由电子能带模型计算所得3种不同结构晶体（因而电子密度也不一样）的平均键能Em等于各自自由电子系统的费米能级EF。平均键能Em是我们在异质结带阶理论计算中建议的一种参考能级,研究结果在深化对平均键能Em物理实质认识的同时,提供了一种借助于自由电子能带模型计算自由电子系统费米能级EF的新方法。     

强光一号装置单氘丝中子发射实验研究

 介绍了利用飞行时间技术测量Z箍缩装置单氘丝中子发射。实验发现,Z箍缩中子发射过程中,伴随产生很强的硬X射线,利用铝丝阵产生硬X射线的实验,建立较好的硬X射线屏蔽,大大减弱了它的辐射强度。所采用的双闪烁探测器中子探测系统,进行了3个发次的单氘丝负载实验,确认产生了聚变氘氘中子。4172发次实验测量结果表明,中子产额1.5×10⁹,中子能量为(2.45±0.26) MeV。实验结合分幅照相数据分析认为,峰电流和负载未能很好匹配,等离子体存在不稳定现象。     

丝阵Z箍缩实验1维X光辐射功率分布

 在Angara-5-1联合实验中,利用条纹像机和光纤阵列实现时间分辨和1维空间分辨,得到了丝阵条纹像,观察到丝阵负载箍缩区X光辐射的1维轴向空间分布信息随时间的演化过程,考察了内爆的同步性和均匀性。通过对比不同结构负载内爆等离子体X光1维时空分布信息,发现由于内层等离子体对磁流体瑞利-泰勒不稳定性的抑制作用,(40+20)根双层钨丝阵比60根单层钨丝阵的内爆轴向同步性好,产生的X光辐射功率高;由于负载存在弯曲、断丝、扭曲等现象,(60+30)根双层钨丝阵比90根单层钨丝阵的轴向同步优势不明显;轴向同步性好与辐射功率高之间存在相关性;辐射波形前沿较快时,X光功率较高。     

用5种不同的电子光学软件对微波管电子枪进行模拟计算

 对TWTCAD微机版、工作站版本、EGUN，CAMEO以及Orprogr电子光学软件背景和特点作了一个简单介绍，并利用其模拟计算了11支不同结构的电子枪。将计算得到的导流系数、射程和注腰半径与实验数据列表对比，结果表明：不同电子光学软件计算不同类型电子枪其计算精度也不一样。在导流系数方面，EGUN和Orprogr的计算精度较高，绝对平均误差分别为7.18%和7.4%；在射程方面，TWTCAD的计算精度最高，绝对平均误差为5.69%；在注腰半径方面，Orprogr与实验值偏差较大，绝对平均误差为47.43%，而工作站版本的计算精度最高，绝对误差仅为2.29%。