Design and simulation of the wire scanner for the injector linac of BEPCⅡ

BEPCⅡ, the upgrade project of Beijing Electron Positron Collider (BEPC), is an accelerator with large beam current and high luminosity, so an efficient and stable injector is required. Several beam diagnostic and monitoring instruments are used. A new diagnostic instrument — wire scanner, has been designed and will be used to measure the profile of the linac beam of BEPCⅡ. This paper describes the prototype of this system and the cause of heat generating of the wire. Some simulation results of the heat and force by using finite element method software—ANSYS^®,2) are presented and discussed.     

北斗导航系统与全球卫星定位系统

 1.北斗导航系统2000年10月31日凌晨0时2分,由我国航天科技集团空间技术研究院自行研制的第一颗导航定位卫星———“北斗导航试验卫星”在西昌卫星发射中心发射成功。“北斗导航试验卫星”的发射成功,为我国“北斗导航系统”的建设奠定了基础。2000年12月21日零时20分,我国自行研制的第二颗“北斗导航试验卫星”,在西昌卫星发射中心用“长征三号甲”火箭发射升空,并准确进入预定轨道。它与10月31日发射的第一颗“北斗导航试验卫星”一起,构成了“北斗导航系统”。这标志着我国将拥有自主研制的第一代卫星导航定位系统。     

冲击法测量磁感应强度实验的数字化解决方案

介绍了冲击法测量磁感应强度实验的基本原理,利用当今成熟的V／F变换技术和单片机技术,实现了对电压积分的测量,解决了冲击法测量磁感应强度实验的数字化问题．     

线阵CCD的调制传递函数

线阵CD作为成像器件得到了日益广泛的应用,因而研究线阵CCD的调制传递函数MTF显得非常必要和重要。本文分析线阵CCD动态MTF及静态MTF,并对其影响因素进行讨论。     

红外光谱法测定高碱性磺酸盐的碱值

采用简单、快速且有选择性的红外光谱法测定高碱性磺酸盐添加剂的碱值。在高碱性磺酸盐同一张谱图上,可以测定到在865厘米～(-1),1180厘米～(-1)分别属于δco_3～(2-),v_(asso)振动的吸收强度,由于样品厚度未知,而采用了吸收比的方法。     

原子吸收分光光度计用于分子吸收分析测定稀土氧化物中铝和硅

用原子吸收分光光度计代替紫外－可见光度计测定元素的分子络合物的分子吸收。作为初步尝试，测定了稀土氧化物中的铝和硅，取得了满意的结果。     

Concentric-Ring Patterns in a Helium Dielectric Barrier Discharge at Atmospheric Pressure

We perform the theoretical simulation of the concentric-ring patterns between two parallel electrodes covered with thin dielectric layers within the scope of a two-dimensional diffusion-drift model at atmospheric pressure. The time evolution of the discharge patterns is studied and the concentric-ring patterns with different radii shift alternately. The spatial-temporal evolution of electron density in a cycle at different time scales is performed.     

霍尔推进器的研究现状与发展趋势

电推进是利用电能加热、离解和加速工质，使其形成高速射流而产生推力的技术。与化学推进相比，电推进具有比冲高、推力小、能重复启动、重量轻和寿命长等特点，因而电推进可用作航天器的姿态控制、轨道转移和提升、轨道修正、阻力补偿、位置保持、重新定位、离轨处理、宇宙探测和星际航行等任务。     

BEPCII直线加速器数字延时触发器的设计与实现

针对北京正负电子对撞机II期（BEPC II）直线加速器升级改造过程中束流位置探测器（BPM）电子学对外部触发信号的需求,设计了一台高精度延时控制、上升时间短和参数灵活调节的数字延时触发器。采用FPGA（现场可编程门阵列）作为主控制器展开设计,重点介绍了基于FPGA的边沿检测模块和多通道延时处理模块的设计与仿真,描述了FPGA和驱动电路的设计方案以及在直线加速器上的应用。经测试,延时可调范围4 ns～4 μs,最小步进4 ns,步进误差0.125%;上升时间2 ns,延时抖动135.4 ps。     

Effects of preparation parameters on growth and properties of β-Ga2O3 film

The Ga$_{2}$O$_{3}$ films are deposited on the Si and quartz substrates by magnetron sputtering, and annealing. The effects of preparation parameters (such as argon-oxygen flow ratio, sputtering power, sputtering time and annealing temperature) on the growth and properties ($e.g.$, surface morphology, crystal structure, optical and electrical properties of the films) are studied by x-ray diffractometer (XRD), scanning electron microscope (SEM), and ultraviolet-visible spectrophotometer (UV-Vis). The results show that the thickness, crystallization quality and surface roughness of the $\beta $-Ga$_{2}$O$_{3}$ film are influenced by those parameters. All $\beta $-Ga$_{2}$O$_{3 }$films show good optical properties. Moreover, the value of bandgap increases with the enlarge of the percentage of oxygen increasing, and decreases with the increase of sputtering power and annealing temperature, indicating that the bandgap is related to the quality of the film and affected by the number of oxygen vacancy defects. The $I$-$V$ curves show that the Ohmic behavior between metal and $\beta $-Ga$_{2}$O$_{3}$ films is obtained at 900 ${^\circ}$C. Those results will be helpful for the further research of $\beta $-Ga$_{2}$O$_{3}$ photoelectric semiconductor.