宽带输出PM580掺杂聚甲基丙烯酸甲酯固体染料激光器研究

采用高效激光染料PM580作为掺杂物质,聚甲基丙烯酸甲酯(PMMA)作为基质,在对固体染料光谱特性研究的基础上,重点研究了调Q倍频Nd:YAG抽运下不同染料掺杂浓度的固体染料激光输出特性.研究结果表明掺杂浓度对输出激光波长影响明显,随着掺杂浓度的增加,激光输出波长红移,从激光增益出发,对该现象给出了理论解释.掺杂浓度对激光转化效率也有影响,当掺杂浓度为2×10^－4mol/L时,获得染料激光输出斜率效率最高达53.8%,抽运能量410mJ时,获得染料激光输出220mJ,激光带宽～8nm 关键词： 固体染料 宽带染料激光 PM580 聚甲基丙烯酸甲酯     

聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)的制备与性能

采用熔融酯交换和缩聚两步法,合成了以1,4-丁二醇、4,8-三环[5.2.1.0(2,6)]癸烷二甲醇和碳酸二苯酯为原料的聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)(PBTCx, x为进料中TCD占二元醇总量的百分比)。用1H NMR和13C NMR对PBTCs的微观结构和组成进行了表征。采用GPC、 DSC、 XRD、 TG对PBTCs的分子量、玻璃化转变温度(Tg)、热稳定性等进行了研究。结果表明,PBTCs的Mw为10500~124800 g?mol-1, Mn为6300~73000 g?mol-1, PDI为1.59~1.73; PBTCs呈无定形态、Tg为-3.43 ℃~70.90 ℃, PBTCs表现出比PBC更高的热稳定性。薄膜拉伸试验结果表明,PBTC30(拉伸强度为33.54 MPa,断裂伸长率为275.69%)和PBTC40(拉伸强度为32.13 MPa,断裂伸长率为294.63%)具有较高的强度和韧性,在薄膜材料中具有一定的应用潜力。     

4,4'-二苯甲烷二异氰酸酯的高效液相色谱分析

用甲醇做衍牛试剂,把4,4'-二苯甲烷二异氰酸酯(MDI)衍生成4,4'-二苯甲烷二氨基甲酸甲酯(MDC),通过高效液相色谱分析MDC的含量来计算MDI的含量.该方法可以将MDI与合成反应中其他化合物完全分离.在测定浓度范围内线性关系良好,方法简单快速,精密度与准确度高.方法既保护了MDI中活泼的异氰酸根,也不需使用运输和储存困难的MDI标准品,能很好地用于化学合成中该产物的分析.     

STABILITY OF BRIGHT SCREENING-PHOTOVOLTAIC SPATIAL SOLITONS

We present a theoretical analysis of the stability of screening-photovoltaic (SP) spatial solitons in biased photovoltaic-photorefractive materials in the case of neglecting the loss of the material and the effect of diffusion. When an incident optical beam is a SP soliton, this beam propagates along a linear path with its shape kept unchanged. When the maximum amplitude, width and functional form of an incident optical beam are slightly different from those of a SP soliton, the beam reshapes itself and tries to evolve into a solitary wave after a short distance. That is, these SP solitons are stable against small perturbations. However, optical beams that significantly differ from SP soliton solutions tend to experience larger cycles of compression and expansion, and their maximum amplitudes oscillate with propagation distances. The larger the perturbations, the stronger the oscillation.     

含硫碳负离子的反应及其应用的研究(Ⅰ)——固-液相转移催化法合成取代肉桂酸酯

虽然含硫碳负离子在有机合成中已有若干应用^[1~4],但要有效地产生这类碳负离子,通常需用有机锂或氢化钠,这些强碱性试剂对氧和潮气都很敏感,在实际应用方面有不足之处。     

P507硝酸体系萃取分组分离重稀土

我们具有丰富的重稀土资源,由于它的应用日益广泛,故研究高效的萃取分离流程具有重要意义。     

强光场中原子的电离速率

以静态场隧道电离为基础,在准静态近似的条件下,对描述强光场中原子及其各阶离子电离的电离速率进行了较为系统的总结,纠正了早期对隧道电离的电离速率公式进行讨论并且后来的计算中被广泛引用的文献「１０」中公式的错误,地部分稀有气体原子及其各了子在线偏振、圆偏振强光场中的了速度及相应的阈值光强进行了比较。     

微弧等离子喷涂碳纳米管/纳米Al2O3-TiO2复合涂层的吸波性能研究

将碳纳米管与纳米Al₂O₃-TiO₂陶瓷粉末超声共混制备了碳纳米管/纳米Al₂O₃-TiO₂复合粉末,测试了复合粉末在2—18GHz波段的电磁参数.研究表明：随着碳纳米管质量分数的增加,碳纳米管/纳米Al₂O₃-TiO₂复合粉末的复介电常数和损耗角不断增大.当碳纳米管质量分数和厚度增加时,复合粉末对电磁波的反射率峰值先增加后减小,而谐振频率不断向低频移动.采用微弧等离子喷涂制备了7wt%碳纳米管/纳米Al₂O₃-TiO₂复合吸波涂层,当厚度为1.5mm时,涂层最小反射率为-24.0dB,当厚度为2.0mm时,涂层小于-10dB的频带宽为3.60GHz,当温度为500℃高温时,1.0mm厚的涂层最小高温反射率为-12.2dB,小于-10dB频带宽为2.0GHz.复合涂层的实际厚度D与理论厚度d呈线关系：d=0.898D+0.515. 关键词： 等离子喷涂 碳纳米管 2O₃-TiO₂')" href="#">纳米Al₂O₃-TiO₂ 吸波性能     

Structural Deformation of CO22+ in Intense Femtosecond Laser Fields

The angular distributions of CO^＋ from the dissociation of CO2^2＋ and CO2^＋ in intense femtosecond laser fields （45 fs, about 5 × 10^15 W/cm^2） are studied at a laser wavelength of 800nm based on the time-of-flight mass spectra of CO^＋ fragment ions. The experimental results show that structural deformation occurs in the charge state of CO2^2＋ and the CO^＋ maintains linear geometrical structure.     

ON THE EXISTENCE OF SOLUTION OF A NONLINEAR TWO-POINT BOUNDARY VALUE PROBLEM ARISING FROM A LIQUID METAL FLOW

In this paper, we discuss the existence of solution of a nonlinear two-point boundary value problem with a positive parameter Q arising in the study of surfacetension-induced flows of a liquid metal or semiconductor. By applying the Schauder＇s fixed-point theorem, we prove that the It improves the result of 0 ≤ Q 〈 1 in problem admits a solution for 0 ≤ Q ≤ 14.306 [2] and 0 ≤ Q ≤ 13.213 in [3].