An electrochemical multienzymatic biosensor for determination of cholesterol

This paper describes an electrochemical biosensor for free cholesterol monitoring. The sensor is a multienzymatic electrodic system in which horseradish peroxidase and cholesterol oxidase are simultaneously immobilized within a polymeric film, on the surface of a pyrolitic graphite electrode. From voltammetric and amperometric (flow-injection) data obtained, the efficiency, reproducibility and stability of the system are discussed. Results obtained, of interest for basic and applied biochemistry, represent a first step for construction of a mediator-free biosensor with potentialities for a successful application in the biosensor area.     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.     

Stimulating effect of graphite admixture on hydrogen sorption-desorption properties of mechanically activated titanium powder

The effect of graphite admixture on hydrogen sorption-desorption properties of mechanically activated electron microscopy, temperature-programmed reaction, and temperature-programmed desorption techniques. The major effect of graphite addition was found to be the formation of microporous carbon matrix particles containing randomly distributed titanium particles only several nanometers in diameter. This powder architecture enhances hydrogen transport to the titanium surface without hindrances and promotes titanium-hydrogen interaction by modifying the titanium surface and subsurface layers with interstitial carbon atoms.     

Tobacco protein separation by aqueous two-phase extraction

Tobacco has long been considered as a host to produce large quantity of high-valued recombinant proteins. However, dealing with large quantities of biomass is a challenge for downstream processing. Aqueous two-phase extraction (ATPE) has been widely used in purifying proteins from various sources. It is a protein-friendly process and can be scaled up easily. In this paper, ATPE was studied for its applicability to recombinant protein purification from tobacco with egg white lysozyme as the model protein. Separate experiments with poly(ethylene glycol) (PEG)-salt-tobacco extract and PEG-salt-lysozyme were carried out to determine the partition behavior of tobacco protein and lysozyme, respectively. Two-level fractional factorial designs were used to study the effects of factors such as, PEG molecular mass, PEG concentration, the concentration of phase forming salt, sodium chloride concentration and pH, on protein partitioning. The results showed that, among the studied systems, PEG-sodium sulfate system was most suitable for lysozyme purification. Detailed experiments were conducted by spiking lysozyme into the tobacco extract. The conditions with highest selectivity of lysozyme over native tobacco protein were determined using a response surface design. The purification factor was further improved by decreasing the phase ratio along the tie line corresponding to the phase compositions with the highest selectivity. Under selected conditions the lysozyme yield was predicted to be 87% with a purification factor of 4 and concentration factor of 14. From this study, ATPE was shown to be suitable for initial protein recovery and partial purification from transgenic tobacco.     

双-杂氮硅三环化合物的合成

杂氮硅三环是一类分子内具有N→Si配位键的化合物，作者曾报道了一系列该类化合物的合成方法和化学结构。对于一个分子内带两个对称的硅三环结构的双一杂氮硅三环化合物的合成，文献报道还很少啪。我们用下     

油页岩和煤的混合干馏

美国和中国有丰富的油页岩资源。由于燃烧式干馏炉处理低品位的油页岩时.一部份产物油被烧掉以补充干馏所需的热量,从而降低了油收率。因此,采用添加少量煤的方法,以补充热量,提高油收率。本文研究煤的添加量对不同空气流速和不同品位油页岩干馏的影响。试验表明,当添加3w%的煤时,油收率可增加40%。此外,由于煤的加入使燃烧段和干馏段之间的距离增大,因此,还可改善干馏条件。     

Fe(CO)5 thin films adsorbed on Au(111) and on self-assembled organic monolayers: I. Structure

The adsorption of Fe(CO)(5) onto Au(111)/mica and C(4), C(8), C(12), and C(16) SAMs/Au(111)/mica surfaces has been studied using infrared spectroscopy to elucidate the coverage-dependent structures of these films and the intermolecular couplings that determine the form of the spectra. For all substrates, the first layer is composed of molecules physisorbed with one axial and two equatorial carbonyl groups directed toward the substrate; subsequent layers are preferentially oriented with the C(3) molecular axis aligned perpendicular to the substrate (i.e., one axial carbonyl group directed toward the substrate). The axial vibrational band systematically shifts to higher frequencies with increasing surface coverage because of the effects of intermolecular coupling of the quasiparallel transition dipole moments. The strong effects of dipolar coupling are also witnessed by the trends of the band positions when the distance to the image plane is systematically varied using highly organized self-assembled organic substrates; no band shifts are observed when dilute Fe(CO)(5) is embedded in Xe matrixes under identical experimental conditions. The as-deposited films are structurally stable below 125 K on Au(111)/mica surfaces and below 100 K on the organic self-assembled monolayers. The instability of the films above these temperatures demonstrates that the as-adsorbed films do not form thermodynamically well-defined phases but are structurally metastable. The results presented herein and in the companion paper provide a consistent framework to interpret the spectroscopy of these systems that resolves outstanding issues concerning these films and provides a structural model that explains the dynamic properties of these films during exposure to low-energy electron beams.     

The effect of the anion on the physical properties of trihalide-based N,N-dialkylimidazolium ionic liquids

Low viscosity, high density trihalide-based 1-n-butyl-3-methylimidazolium ionic liquids have been prepared and characterised. Key physical properties (density, conductivity, melting point, refractive index, surface tension and diffusion coefficient) of the ionic liquids have been determined and are compared with those of other 1,3-dialkylimidazolium molten salts. The relationship between anion identity and the physical properties of the ionic liquids under investigation is discussed.     

Efficient synthesis of an imidazole-substituted delta-amino acid by the integration of chiral technologies

Two methods to produce (2S)-5-amino-2-(1-n-propyl-1H-imidazol-4-ylmethyl)-pentanoic acid were investigated. Diastereoisomeric salt resolution, using the quinidine salt, gave the desired intermediate in 98% ee and 33% yield. Asymmetric hydrogenation of various substrates gave high conversions, with up to 83% ee. Integration of these two approaches via asymmetric hydrogenation of a quinidine salt substrate followed by crystallization provided the desired intermediate in 94% ee and 76% yield.