RIBLL束流诊断

描述了兰州放射性离子次级束流线(RIBLL)上研制并安装使用的放射性束流(RIB)诊断装置的种类、结构、性能及在AIBLL上的位置和功能.重点叙述了以光纤为基础的几种诊断元件,它们探测效率高、响应时间快、制作容易、性能稳定.给出了RIB¹⁷N等高图,说明诊断装置辅助MBLL得到RIB的水平.     

高性能双稳态向列相液晶显示器

提出四种可实际应用的非垂直偏振片配置的双稳态扭曲向列相液晶显示模式.这些显示模式大都具有高稳定性,并能提供高对比度和高亮态透过率.有些甚至可达到扭曲向列相液晶显示器的显示效果,实现黑白显示.这些显示模式性能优于已提出的垂直偏振片配置的其他双稳态向列相液晶显示模式. 关键词： 双稳态向列相 液晶显示 参数空间     

分离作用RFQ加速器物理特性的研究

RFQ加速器中加速效率随加速能量的增高而下降,为克服由此导致的RFQ能量局限而提出的分离作用RFQ加速结构,在仍保持采用射频四极场聚焦的同时,将加速与聚焦作用相分离. 综述了对它的加速效率、反场问题、腔体及束流特性研究 的结果,初步证实了其可行性及在较高能量区加速效率得到提高,并对正在研制的一台采用了这种分离作用RFQ的1.5MeV组合加速器做了介绍.     

HIRFL-CSRm内靶实验终端CsI(Tl)电磁量能器性能模拟

基于GEANT4模拟了HIRFL CSRm内靶实验终端的CsI(Tl)电磁量能器系统,给出了CsI电磁量能器的最佳设计参数及可能达到的性能.结果表明,设计的CsI(Tl)电磁量能器系统能够满足所研究的物理要求. Based on the GEANT4, the performance of the electromagnetic calorimeter (EMC) of the internal-target detector at HIRFL-CSRm is simulated. The simulation results show that 1.5%—3% of the energy resolution σ_E/E and 2° of the polar angular resolution σ_θ can be obtained. The invariant mass of the π~0 decay can be reconstructed well. The performance can meet the requirement of studying the proposed physics at HIRFL-CSRm.     

合肥光源二分割三角型光位置检测器的研制

介绍了一种用于合肥光源的二分割三角型光位置检测器的研制,对其主要性能(如灵敏度和线性范围)进行了理论分析和实际测量,测量结果与理论分析相当吻合.文中还给出了光位置测量系统的组成     

惯性约束聚变中环孔编码图像恢复的改进维纳滤波方法

针对惯性约束聚变(ICF)中环形孔径编码图像的恢复问题提出了一种改进的维纳滤波方法。在传统的维纳滤波方法中,由于原图像和噪声是未知的,故通常是用某一待定常量来代替其中的噪声与信号的谱密度之比。这种近似忽视了信号与噪声本身的信息,从而造成丢失某些关键的细节,难以达到高质量的图像复原效果。在改进的方法中,首先采用传统维纳滤波方法求得初始估值,然后利用该初始值求得原图像及噪声的谱密度估值,进而利用这些新获得的信息构成改进的维纳滤波器对退化图像进行第二次滤波。实验表明,这种改进方法可以克服原方法的不足,突出图像的一些关键细节,提高图像的整体质量。在仿真实验中,恢复图像的均方误差降低了15％以上;在实际惯性约束聚变图像的解码恢复实验中,图像恢复效果亦有显著改善。该方法还可以推广到其他图像恢复的应用中。     

Scheme for Robust Long-Distance Continuous Variable Quantum Key Distribution

It is shown that the configuration of phase coding for quantum key distribution with single photon can also be used for continuous variable quantum key distribution. Therefore the robust long-distance high-speed quantum key distribution can be achieved with current technology.     

Design of quantum VQ iteration and quantum VQ encoding algorithm taking O（√N） steps for data compression

Vector quantization (VQ) is an important data compression method. The key of the encoding of VQ is to find the closest vector among N vectors for a feature vector. Many classical linear search algorithms take $O(N)$ steps of distance computing between two vectors. The quantum VQ iteration and corresponding quantum VQ encoding algorithm that takes $O(\sqrt N )$ steps are presented in this paper. The unitary operation of distance computing can be performed on a number of vectors simultaneously because the quantum state exists in a superposition of states. The quantum VQ iteration comprises three oracles, by contrast many quantum algorithms have only one oracle, such as Shor's factorization algorithm and Grover's algorithm. Entanglement state is generated and used, by contrast the state in Grover's algorithm is not an entanglement state. The quantum VQ iteration is a rotation over subspace, by contrast the Grover iteration is a rotation over global space. The quantum VQ iteration extends the Grover iteration to the more complex search that requires more oracles. The method of the quantum VQ iteration is universal.     

Structural and Photoluminescence Properties of β-Ga2O3 Nanofibres Fabricated by Electrospinning Method

We have prepared the 13-Ga2 O3 nanofibres by electrospinning method followed by calcining in air at 900℃. The morphology and structure of the nanofibres are characterized by field emission scanning electron microscopy （FE-SEM）, x-ray diffraction （XRD） and Raman technique. These nanofibres have diameters ranging from 60 to 130hm and lengths up to several millimetres. Photoluminescence （PL） spectrum under excitation at 325 nm shows that theseβ-Ga2 O3 nanofibres have a blue emission peaking at 466nm, which may be attributed to defects such as the oxygen vacancies, gallium vacancies and gallium-oxygen vacancy pairs.     

Image charge effect on the light emission of rutile TiO_2(110) induced by a scanning tunneling microscope

The plasmon-enhanced light emission of rutile TiO_2(110) surface has been investigated by a low-temperature scanning tunneling microscope(STM). We found that the photon emission arises from the inelastic electron tunneling between the STM tip and the conduction band or defect states of TiO_2(110). In contrast to the Au(111) surface, the maximum photon energy as a function of the bias voltage clearly deviates from the linear scaling behavior, suggesting the non-negligible effect of the STM tip on the band structure of TiO_2. By performing differential conductance( dI/dV) measurements, it was revealed that such a deviation is not related to the tip-induced band bending, but is attributed to the image charge effect of the metal tip, which significantly shifts the band edges of the TiO_2(110) towards the Femi level(E_F) during the tunneling process. This work not only sheds new lights onto the understanding of plasmon-enhanced light emission of semiconductor surfaces, but also opens up a new avenue for engineering the plasmon-mediated interfacial charge transfer in molecular and semiconducting materials.