基于标准区间灰数的发展带离散DDGM预测模型

由于区间灰数运算体系尚不完善,灰数间的代数运算将导致结果灰度增加,难以有效构建基于"区间灰数"的灰色发展带预测模型.对此,通过将区间灰数进行标准化处理,分解成基于实数形式的"白部"和"灰部"两个部分;然后分别对"白部"和"灰部"建立发展带预测模型,再推导并还原得到区间灰数的发展带预测模型;最后,将模型用于摆动幅度大且整体趋势增长的区间灰数在未来时刻的预测,预测效果验证了所提出模型的有效性.     

High microwave absorption performances for single-walled carbon nanotube–epoxy composites with ultra-low loadings

Microwave-absorbing polymeric composites based on single-walled carbon nanotubes(SWNTs) are fabricated via a simple yet versatile method, and these SWNT–epoxy composites exhibit very impressive microwave absorption performances in a range of 2 GHz–18 GHz. For instance, a maximum absorbing value as high as 28 dB can be achieved for each of these SWNT–epoxy composites(1.3-mm thickness) with only 1 wt% loading of SWNTs, and about 4.8 GHz bandwidth,corresponding to a microwave absorption performance higher than 10 dB, is obtained. Furthermore, such low and appropriate loadings of SWNTs also enhance the mechanical strength of the composite. It is suggested that these remarkable results are mainly attributable to the excellent intrinsic properties of SWNTs and their homogeneous dispersion state in the polymer matrix.     

Electromagnetically induced grating in a four-level tripod-type atomic system

An electromagnetically induced grating in a four-level tripod-type atomic system is studied theoretically. By virtue of a weak standing-wave signal field, the phase modulation effectively diffracts a weak probe field into the first-order direction. By changing the weak signal field, the diffraction of the weak probe field can be modulated in real time, and a first-order diffraction efficiency of more than 32% can be obtained with proper parameters. Such a system has a potential application in an all-optical switch controlled by a weak optical signal.     

An iterative analytic–numerical method for scattering from a target buried beneath a rough surface

An efficiently iterative analytical-numerical method is proposed for two-dimensional （2D） electromagnetic scattering from a perfectly electric conducting （PEC） target buried under a dielectric rough surface. The basic idea is to employ the Kirchhoff approximation （KA） to accelerate the boundary integral method （BIM）. Below the rough surface, an iterative system is designed between the rough surface and the target. The KA is used to simulate the initial field on the rough surface based on the Fresnel theory, while the target is analyzed by the boundary integral method to obtain a precise result. The fields between the rough surface and the target can be linked by the boundary integral equations below the rough surface. The technique presented here is highly efficient in terms of computational memory, time, and versatility. Numerical simulations of two typical models are carried out to validate the method.     

Bidirectional reflectance distribution function modeling of one-dimensional rough surface in the microwave band

In this study, the bidirectional reflectance distribution function(BRDF) of a one-dimensional conducting rough surface and a dielectric rough surface are calculated with different frequencies and roughness values in the microwave band by using the method of moments, and the relationship between the bistatic scattering coefficient and the BRDF of a rough surface is expressed. From the theory of the parameters of the rough surface BRDF, the parameters of the BRDF are obtained using a genetic algorithm. The BRDF of a rough surface is calculated using the obtained parameter values. Further, the fitting values and theoretical calculations of the BRDF are compared, and the optimization results are in agreement with the theoretical calculation results. Finally, a reference for BRDF modeling of a Gaussian rough surface in the microwave band is provided by the proposed method.     

不同裂解条件对天冬酰胺主要裂解产物的影响

采用在线裂解气相色谱-质谱联用技术(Py/GC-MS)对不同条件下天冬酰胺的主要裂解产物进行分析,并通过裂解同位素标记样品,计算主要含氮裂解产物中的同位素比例,推测其形成途径,研究裂解条件对主要裂解产物形成的影响。结果表明:温度对天冬酰胺裂解影响较大,主要裂解产物在低温和高温下生成量变化较大。300℃时,马来酰亚胺和琥珀酰亚胺为主要的裂解产物,300～600℃时生成量显著增加,600～900℃时马来酰亚胺生成量缓慢增加而琥珀酰亚胺逐渐降低;随着温度升高,酸类和酰胺类物质生成量持续增加;腈类和吡咯类物质在高温下生成量明显增加。此外,温度对含氮裂解产物的形成途径也有较大影响。马来酰亚胺、乙酰胺在低温下N主要来源于标记的酰胺N,而在高温下主要来源于未标记的氨基N。氢氰酸、乙腈和丙烯腈中的N原子均主要由未标记的氨基转变而来,且随着温度升高,这种生成途径所占比例越高。而裂解气氛和裂解时间对天冬酰胺主要裂解产物的生成量及途径影响较小。     

2-苯硫基苯并咪唑的合成

在不使用金属催化剂、配体及强碱的情况下,以DMF为溶剂,于130℃反应24 h,2-巯基苯并咪唑与二苯基碘三氟甲磺酸盐高选择性地发生芳基化反应,合成了2-苯硫基苯并咪唑,收率80.7%,其结构经1H NMR和13C NMR确证。     

分散聚合与水热处理相结合制备单分散聚苯乙烯微球的研究

将分散聚合与水热处理相结合,以聚乙烯醇为稳定剂,以乙醇和水为分散介质,三羟甲基丙烷三丙烯酸酯为交联剂,一步法成功制备得到不同粒径的单分散交联聚苯乙烯微球.以乙醇/水的比例为50/50的反应体系为基础,研究了聚乙烯醇类型和含量,有机相含量,引发剂浓度,以及水热釜填充量等对所制备的微球形貌的影响,发现聚乙烯醇类稳定剂的分子量的降低和含量的增多倾向于生成黏连的微球;在有交联剂的条件下,不含稳定剂的体系仍能够得到单分散的交联PS微球;有机相含量的增加会导致微球呈现多分散性;而体系中引发剂的含量和反应液在水热釜中的填充量对微球的形貌影响不大.进一步针对水热法的特点分析探讨了一步法成功制备单分散的交联聚苯乙烯微球的原因及其机理.     

高氯钻井废水低COD分析方法改进

用重铬酸钾法测定油气田高氯低COD的钻井废水时会产生较大误差。对该国标法测定COD进行了改进,采用低浓度氧化剂,增加硫酸汞以掩蔽氯离子来降低COD的分析误差。实验结果表明,选择0.0500 mol/L的重铬酸钾溶液,硫酸汞与氯质量比为10︰1时,测定结果的相对误差小于10%,适合测定高氯低COD钻井废水的COD值。该方法扩大了国标法的适用范围。     

γ 射线辐照对煤中自由基浓度变化和电解加氢液化的影响

利用电子顺磁共振（ESR）波谱仪对 γ 射线辐照前后的煤样进行了自由基的测试,结合气相色谱分析研究了辐照对煤结构的影响,并对辐照前后的煤样进行了电化学测试。结果表明,辐照可以促进煤中大分子烷烃链及杂原子的断裂,并产生氢气、甲烷等小分子量的气体,当辐照剂量为40 kGy 时,自由基浓度达到最大。而自由基浓度的增大有利于煤的电解加氢液化,且当辐照剂量为40 kGy 时,电流密度达到最大。