丙酮+环己烷+甲醇组成的最低共沸混合物热力学性质的研究

Molar heat capacities of the pure samples of acetone,methanol and the azeotropic mixture composed of acetone,cyclohexane and methanol were measured by an adiabatic calorimeter from 78 to 320 K.The solid-solid andsolid-liquid phase transitions of the pure samples and the mixture were determined based on the curve of the heatcapacity with respect to temperature.The phase transitions took place at(126.16±0.68)and(178.96±1.47)K forthe sample of acetone,(157.79±0.95)and(175.93±0.95)K for methanol,which were corresponding to thesolid-solid and the solid-liquid phase transitions of the acetone and the methanol,respectively.And the phase tran-sitions occurred in the temperature ranges of 120 to 190 K and 278 to 280 K corresponding to the solid-solid andthe solid-liquid phase transitions of mixture of acetone,cyclohexane and methanol,respectively.The thermody-namic functions and the excess thermodynamic functions of the mixture relative to standard temperature of 298.15K were derived based on the relationships of the thermodynamic functions and the function of the measured heatcapacity with respect to temperature.     

水合邻苯二甲酸钠的合成、结构表征及热化学性质

选择邻苯二甲酸和氢氧化钠作为反应物,利用液相合成方法合成了水合邻苯二甲酸钠.利用X射线粉末衍射、化学与元素分析等方法表征了它的组成和结构.利用精密自动绝热热量计测定了该化合物在78～366K温区的摩尔热容.将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp,m)对温度(T)的多项式方程,用此方程进行数值积分得到此温度区间内每隔5K的舒平热容值和相对于298.15K时的热力学函数值.另外,依据Hess定律,通过设计合理的热化学循环,利用等温环境溶解-反应热量计分别测量了固相量热反应的反应物和产物在所选溶剂中的溶解焓,从而确定反应的反应焓为:ΔrHm=29.073±1.05kJ·mol-1.最后,利用反应的反应焓和其它反应物和产物已知的热力学数据计算出水合邻苯二甲酸钠的标准摩尔生成焓为:-1493.637±1.11kJ·mol-1.     

配合物Zn(His)SO4·H2O(s)的低温热容和热力学性质

通过精密自动绝热热量计测定了配合物Zn(His)SO4*H2O(s)在78～390K温区的摩尔热容,由热容曲线得到其起始脱水温度328.90K;用最小二乘法拟合得到摩尔热容(Cp,m)对温度(T)的多项式方程,并在此基础上计算了它的各种热力学函数.此外,研究了其在惰性气氛下的热分解过程.     

重铬酸钾晶体低温热容及热力学性质的研究

用精密自动绝热量热计测定了重铬酸钾晶体在100～390 K温区内的摩尔热容.实验结果表明在研究温度区间内重铬酸钾无相变和其它热反常现象发生,但其热容在不同的温度范围表现出不同的变化趋势.在100 K≤ T ≤ 275 K和350 K≤ T ≤390 K区间内,其热容随温度的升高明显增大,在275 K≤ T ≤350 K区间,其热容约为定值.将重铬酸钾摩尔热容实验值Cp,m(J•K－1•mol－1)拟合成温度T的多项式方程,在100 K≤ T ≤275 K,为Cp,m=0.0050T2－1.0320T＋125.22； 275 K≤ T ≤ 350 K,为Cp,m=209.37； 350 K≤ T ≤390 K,为Cp,m= 0.0266T2－18.823T＋3542.3.根据热力学函数关系式,从热容值计算出了298.15 K～ 400 K温区范围内每隔5 K的热力学函数值.     

纳米铁的低温热容和热力学性质研究

用扫描电子显微镜(SEM)测定了纳米铁试样的粒径, SEM结果表明Fe试样平均粒径d为25 nm. 在84～350 K温区, 用精密低温绝热量热计测定了该纳米铁试样的等压摩尔热容, 拟合出其等压摩尔热容与热力学温度的函数关系式: Cp=36.831+14.772x−5.4968x2−0.7099x3−1.3188x4, 其中x=(T−234)/156. 根据热容与热力学函数关系, 计算了以298.15 K为基准的纳米Fe(d=25 nm)热力学函数, 并与文献报导的粗晶Fe及粒径87 nm Fe的热容进行了比较, 从能量角度分析了不同粒径Fe热容曲线差别产生的原因.     

Thermodynamic Investigation of the Azeotropic Mixture Composed of Water and Benzene

The molar heat capacity of the azeotropic mixture composed of water and benzene was measured by an adiabatic calorimeter in the temperature range from 80 to 320 K. The phase transitions took place in the temperature range from 265.409 to 275.165 K and 275.165 to 279.399 K. The phase transition temperatures were determined to be 272.945 and 278.339 K, which were corresponding to the solid-liquid phase transitions of water and benzene, respectively. The thermodynamic functions and the excess thermodynamic functions of the mixture relative to standard temperature 298.15 K were derived from the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

水与正丁醇二元体系最低共沸混合物的热容

Molar heat capacities of n-butanol and the azeotropic mixture in the binary system [water （x=0.716） plus n-butanol （x=0.284）] were measured with an adiabatic calorimeter in a temperature range from 78 to 320 K. The functions of the heat capacity with respect to thermodynamic temperature were estabhshed for the azeotropic mixture. A glass transition was observed at （111.9±1.2） K. The phase transitions took place at （179.26±0.77） and （269.69±0.14） K corresponding to the solid-hquid phase transitions of n-butanol and water, respectively. The phase-transition enthalpy and entropy of water were calculated. A thermodynamic function of excess molar heat capacity with respect to temperature was estabhshed, which took account of physical mixing, destructions of self-association and cross-association for n-butanol and water, respectively. The thermodynamic functions and the excess thermodynamic ones of the binary systems relative to 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity and the calculated excess heat capacity with respect to temperature.     

新型镧三元配合物La(Glu)(Im)6(ClO4)3·4HClO4·4H2O的合成和热化学性质

合成了新型镧三元配合物La(Glu)(Im)6(ClO4)3·4HClO4·4H2O(Glu, 谷氨酸; Im, 咪唑). 用高精度全自动绝热量热仪测定了该配合物晶体80-390 K温区的热容, 利用实验热容数据, 建立了热容随温度变化的多项式方程; 根据焓、熵与热容的关系, 求出了配合物在80-390 K温区内相对于298.15 K的标准热力学函数(HT-H298.15)和(ST-S298.15). 绝热量热和差示扫描量热(DSC)分析均发现配合物在216和246 K附近存在玻璃态和晶型转变, 其机理可能是配合物中高氯酸根离子重取向运动. 用热重法(TG)检测了配合物的高温热稳定性并提出了可能的热分解机理.     

2-碘-3-硝基甲苯的低温热容和热力学性质

通过精密自动绝热热量计测定了2-碘-3-硝基甲苯(C~7H~6INO~2)在79～373K温区的摩尔热容。实验结果表明,这个化合物在331～340K温度区间有一个固-液熔化相变,其熔化温度、摩尔熔化焓、摩尔熔化熵以及该样品的化学纯度分别为：(339.311±0.13)J·mol^-^1·K^-^1和99.73%。用热容多项式议程进行数值积分获得了该物质在298.15～370K温区每隔5K的热力学函数值。用DSC分析对它的固-液相变过程作了进一步的研究。     

4.2—90K固体比热容国家标准的建立——Ⅰ.25—90K自动绝热量热计及α-Al_2O_3的摩尔热容

本文详细描述了一套用于25—90K温区内精密测定固体热容的自动绝热量热计及其低温恒温器的结构,对样品容器特别设计了与内壁非接触、薄壁径向、分布均匀的散热片,充分改善了量热容器内部的热平衡条件,对绝热控制研制了专用的高精度ACD-79型绝热控温仪,大大提高了量热系统中热屏和导线的控温精度,用国产标准参考材料,高纯α-A1_2O_3检测了该量热计的性能;α-A1_2O_3摩尔热容实验结果与美国标准局数据比对其标准偏差为±0.3％—±0.1％。