2,2,2-三硝基乙基-N-硝基甲胺的热安全性

为评价2,2,2-三硝基乙基-N-硝基甲胺(TNMA)的热安全性, 得到计算TNMA热安全性参数用的基本数据, 用经验式估算了TNMA的比热容(C_p)和热导率(λ). 用键能贡献于生成热Q_f的加和法, 估算了TNMA的标准生成焓Δ_cH_m^θ(TNMA, s, 298.15 K). 用热力学公式计算了TNMA的标准燃烧焓ΔU_m^θ(TNMA, s, 298.15 K)和标准燃烧能Δ_cH_m^θ(TNMA, s, 298.15 K). 用Kamlet-Jacobs 公式估算了爆速、爆压和爆热. 用经验式估算了分解热(Q_d). 通过差示扫描量热(DSC)曲线和高灵敏度布鲁顿玻璃薄膜压力计测得的逸出气体标准体积(V_H)-时间(t)曲线, 得到了TNMA放热分解反应的动力学参数. 用上述基本数据得到了评价TNMA的热安全性参数: 自加速分解温度(T_SADT), 热爆炸临界温度(T_be0和T_bp0), 绝热至爆时间(t_TIad), 撞击感度50%落高(H₅₀), 热点起爆临界温度(T_cr), 被300 K环境包围的半厚和半径为1 m的无限大平板、无限长圆柱和球形TNMA的热感度概率密度函数S(T), 相应于S(T)-T关系曲线最大值的峰温(T_S(T)max), 安全度(SD), 临界热爆炸环境温度(T_acr)和热爆炸概率(P_TE). 结果表明: (1) TNMA有较好的热安全性和对热抵抗能力, 与环三亚甲基三硝胺(RDX)相比, TNMA易从热分解过渡到热爆炸; (2) 不同形状大药量TNMA 热安全性降低的次序为: 球>无限长圆柱>无限大平板; (3)TNMA有高的燃烧能、高的爆轰化学能(爆热)和接近环四亚甲基四硝胺(HMX)的爆炸性能, 其对冲击敏感, 冲击感度与季戊四醇四硝酸酯(PETN)和特屈尔接近, 可用作混合炸药主组分.     

基于主动式时间反转镜的声呐目标强度测量研究

为提高目标强度测量过程中的抗噪声、混响以及浅海多途干扰性能,从军标文件中的目标强度测量方法以及主动式时间反转镜的基本原理出发,经过研究和推演,发现可将基于单阵元的主动式时间反转镜与相关器结合应用于目标强度测量过程,提出了一种新的目标强度测量方法。该方法利用了主动式时间反转镜的抗多途特性,使得测量具有抗多途的性能;利用噪声与信号的不相关特性,算法结合相关器起到了很好的抗随机噪声效果;混响中的体积混响是随机的,算法具有抗体积混响的性能。论文分别从理论仿真和水池实验验证了算法的有效性和正确性。     

Research Progress of Regulation of Driving Forces in Short Peptide Supramolecular Self-Assembly北大核心CSCD

Some short peptides can spontaneously self-assemble into various nanostructures via the synergistic driving forces of non-covalent interactions. These non-covalent interactions,including electrostatic interaction,hydrogen bonding,aromatic interactions and other non-covalent interactions,are usually highly coupled together. Through rational sequence design and proper modification of short peptide molecules,the driving forces could be regulated purposively,and the nanostructures and morphologies of the self-assemblies could be controlled accordingly,and thus so as to achieve the fabrication of peptide-based supramolecular biomaterials and develop their functions. In this paper,the effects of hydrogen bonding,π-π stacking, electrostatic interaction,hydrophobic interaction,metal ion coordination and chiral center on the self-assembly behavior of peptide self-assembly have been reviewed. The driving force regulation strategies, including sequence design,pH and concentration adjustment and metal ion coordination,and the resulted nanostructures have also been discussed. We also make the outlooks on the development of peptide-based supramolecular biomaterials with specific functions in biomedicines and biocatalysis. © 2022, Science Press (China). All rights reserved.     

一种计算液接电势的新方法*

依据液接电势达稳态时通过边界层的净电荷为零这一思想,提出了一种计算液接电势的新方法。对于3类液接电势的计算,特别是Lewis-Sargent公式与Henderson方程的推导,思路清晰易懂,避免了过往液接电势计算方法存在的一些问题。本文所提出的方法能够为液接电势相关内容的教学提供借鉴。     

Design and performance of the LLRF system for CSNS/RCS

The rapid cycling synchrotron(RCS) is part of the China Spallation Neutron Source(CSNS). The RCS provides 1.6 Ge V protons with a repetition rate of 25 Hz. The RF system in RCS is mainly composed of a ferrite loaded RF cavity, a high power tetrode amplifier, a bias supply of 3300 A and a digital low level RF(LLRF) system based on FPGA. The major challenge of the LLRF system is to solve problems caused by rapid frequency sweeping and the heavy beam loading effect. A total of eight control loops are applied to ensure the normal operation. An effective feedforward scheme is widely used to improve the dynamic performance of the system. The design of the LLRF system and high power integration test results with the prototype RF system are presented.     

基于LabVIEW的砝码自动检定系统设计与实现

针对目前砝码检定工作操作过程复杂、检定效率低等问题,设计了一种基于LabVIEW的砝码自动检定系统。在符合砝码检定规程的情况下,系统实现了检定数据实时采集、数据处理、生成原始记录、管理标准器、查询历史数据和衡器控制等功能。相对现有的砝码检定方法有操作简单、高效、程序移植性好等优点。系统由主控计算机、串口转无线扩展卡、多台衡器设备及相应的标准砝码装置组成。通过使用串口转Wi-Fi模块,系统可实现控制多台衡器设备的需求。实验结果证明,系统运行稳定可靠,采集数据准确,容易扩展,且大幅度减轻了检定人员的劳动强度,在计量检定工作中具有一定的实用和推广价值。     

基于ZigBee网络和超声定位的智能跟随小车

基于成熟的IEEE802.15.4协议和ZigBee无线模块,结合超声定位,设计了一种新颖的智能跟随系统。设计的核心为PIC18F4620单片机和MRF24J40MA无线收发模块,通过无线收发来完成节点间的识别与同步,同时以超声测距系统完成对被跟踪目标的定位,通过控制驱动电机动作实现对指定目标的定距离跟随。控制网络以子网的形式控制不同系统的分时定位跟随,同时管理各移动定位系统的入网和切换。样机测试结果表明系统达到了预期的跟随设计要求,具有一定的工程使用价值。     

基于电源电流和输出电压的模拟电路故障模型研究

基于模拟电路电源电流和输出电压的协同分析,研究了复数域的故障建模方法,提出了一种2D故障模型的数学表达式,该模型为复平面上的一簇圆轨迹。为了扩大故障轨迹之间的距离,在相同测量精度和元件容差条件下提高故障检测率和隔离率,进一步提出了3D复数空间的优化故障模型。两种故障模型都极大简化了测点选择算法和模拟故障状态仿真的复杂度,理论上对模拟电路单故障的覆盖率为100%。基于滤波器电路的实验仿真结果验证了两种故障模型的有效性。     

定向回归反射玻璃微珠折射率研究

从理论上分析了玻璃微珠定向回归反射原理,利用近轴光线球面折射理论分析了玻璃微珠实现回归反射的折射率,并结合实际使用情况,在最大可能增加回归反射的基础上,讨论了入射光线到主光轴的距离与回归光线和入射光线夹角之间的关系,从而确定出了实现最大反射时玻璃微珠的折射率范围为1.80~1.95,研究结果对回归反射标志牌的开发具有重要的理论意义。     

Effect of optimized aging processing on properties of the sintered Dy-doped Nd–Fe–B permanent magnet

We investigate the effect of the optimized aging processing on magnetism and mechanical property of the sintered Dydoped Nd–Fe–B permanent magnet. The experimental results show that the magnetism, especially intrinsic coercivity, of the optimized aged Dy-doped Nd–Fe–B magnet is more excellent than that of the sintered one, but the former's strength and hardness are lower than that of the latter. It was observed that the optimized aged Dy-doped Nd–Fe–B magnet have more uniform grain size, thinner(Nd, Dy)-rich boundary phase. By means of the EBSD technology, the number of larger angle grain boundaries in the optimized aged Dy-doped Nd–Fe–B magnet is more than that of the sintered one. The reasons for the increased intrinsic coercivity and decreased mechanical properties of the optimized aged Dy-doped Nd–Fe–B magnet are also discussed.