排序方式: 共有30条查询结果,搜索用时 15 毫秒
11.
12.
Coupling plane wave into a single-mode fiber(SMF) with high and steady coupling efficiency is crucial for fiberbased free-space laser systems, where random angular jitters are the main influencing factors of fiber coupling. In this paper, we verified a new adaptive-optic device named adaptive fiber coupler(AFC) which could compensate angular jitters and improve the SMF coupling efficiency in some degree. Experiments of SMF coupling under the angular jitter situation using AFC have been achieved. Stochastic parallel gradient descent(SPGD) algorithm is employed as the control strategy, of which the iteration rate is 625 Hz. In closed loop, the coupling efficiency keeps above 65% when angular errors are below 80 μrad. The compensation bandwidth is 35 Hz at sine-jitter of 15 μrad amplitude with average coupling efficiency of above 60%. Also, experiments with simulated turbulence have been studied. The average coupling efficiency increases from 31.97% in open loop to 61.33% in closed loop, and mean square error(MSE) of coupling efficiency drops from 7.43% to 1.75%. 相似文献
13.
采用CaO-MgO-SiO2为烧结助剂,采用无压烧结技术,研究了烧结温度对96Al2O3陶瓷热导率及力学性能的影响.采用阿基米德排水法、三点弯曲法、激光脉冲法、扫描电子显微镜(SEM)及X射线衍射(XRD)等分析手段和设备,对烧结后陶瓷样品的密度、力学性能、热导率和微观组织结构进行了分析研究.研究结果表明:1600℃烧结的Al2O3样品的具有较好的导热性和力学性能,其热导率、密度、维氏硬度和抗弯强度分别为24.9W/(m·K),3.82g/cm3,(13.8±0.2)GPa,(362.9±26.9)MPa. 相似文献
14.
A new wavelet-based image denoising algorithm, which exploits the edge information hidden in the corrupted image, is presented. Firstly, a canny-like edge detector identifies the edges in each subband. Secondly, multiplying the wavelet coefficients in neighboring scales is implemented to suppress the noise while magnifying the edge information, and the result is utilized to exclude the fake edges. The isolated edge pixel is also identified as noise. Unlike the thresholding method, after that we use local window filter in the wavelet domain to remove noise in which the variance estimation is elaborated to utilize the edge information. This method is adaptive to local image details, and can achieve better performance than the methods of state of the art. 相似文献
15.
光纤激光光束合成技术被公认为是实现高亮度、高光束质量激光束的优秀方法, 而激光阵列间的倾斜像差是影响合成效果的重要因素. 针对当前光束合成中存在的倾斜校正量受限问题, 提出了基于自适应桶中功率(PIB)评价函数的倾斜控制策略. 搭建了两路2 W光纤放大器的相干合成实验平台, 利用自制的压电环光纤相位调制器和自适应光纤准直器分别实现锁相和倾斜像差校正, 验证了基于自适应PIB的倾斜控制策略的可行性, 并实现了相干合成.
关键词:
光纤激光阵列
倾斜控制
自适应桶中功率
相干合成 相似文献
16.
超声换能器带宽对光声成像的影响 总被引:9,自引:2,他引:7
研究了不同尺寸吸收体产生的光声压的频谱特性:对于厘米量级、毫米量级和几百个微米量级的吸收体,产生光声压频谱的主要范围分别约为20~300kHz、70kHz~2.5MHz和400kHz~20MHz;讨论了不同频率范围的光声信号对重建图像的影响,低频段的光声信号能反映物体的非边界区域,而高频段的光声信号能突出物体的细微结构,尤其是物体的边界特征。提出了不同尺寸的吸收体要选用或设计不同带宽范围的探测器进行检测的方法.当探测器的带宽范围与光声压频谱范围基本吻合时,损失的频率成份较少,重建的光声图像效果较好,这一结论在仿真和实验结果中都得到了证明。实验用的光源为YAG激光器,波长为532nm,重复频率为30Hz,脉宽为7ns,探测器为针状的PVDF膜水听器,接收面积的直径为1mm。 相似文献
17.
为减小大口径光学窗口对系统入射光线的影响,提高光学窗口性能及光学系统成像质量,提出了基于普通环带支撑的中间环带辅助支撑形式,并在不同口径、径厚比及遮拦比状态下比较两种支撑方式对光学系统波前误差的影响。与普通环带支撑方式相比,采用中间环带辅助支撑形式可以降低90%的由窗口引入的波前误差,该方式对径厚比为100/1的窗口的支撑效果可以达到普通支撑方式下径厚比为100/3的窗口类似的支撑效果。因此,中间环带辅助支撑形式可以有效提高窗口支撑效率、减小窗口厚度及质量、降低窗口对入射光线的体吸收率。 相似文献
18.
19.
20.
子孔径拼接检测光学系统波前机械定位误差补偿算法 总被引:3,自引:0,他引:3
为了实现大口径光学系统波前子孔径拼接干涉测量,保证子孔径采样数据准确定位,提出了子孔径拼接定位补偿算法。介绍了该算法原理,分析了该算法子孔径定位误差补偿能力。首先根据被检光学系统和子孔径口径大小规划出采样子孔径布局,在子孔径采样装置机械精度误差范围内对子孔径进行拼接,根据所求子孔径定位误差补偿系数和调整误差系数,得到被检全孔径波前,完成大口径光学系统波前的拼接检测。通过仿真验证了该算法的可行性,在机械平移定位精度为1 mm和转动角定位精度为0.5°时,用该算法实验检测口径为200 mm的光学系统平面波前。检测结果表明该算法稳定可靠,能有效补偿机械精度引起的子孔径定位误差,从而可放宽对机械定位精度的要求。 相似文献