一锅法合成四芳基吡咯并[3,2-b]吡咯空穴传输材料及其在无掺杂倒置钙钛矿太阳电池的应用

本文采用一锅法合成了四芳基吡咯并[3,2-b]吡咯有机空穴输运材料(D41、D42、D43和D44),制备出无掺杂的倒置型平面钙钛矿太阳电池. 材料D41的芳环上含有甲基,具有供体-π-给体-π-供体结构;而D42、D43和D44具有受体-π-给体-π-受体结构,其中,芳环上分别含有氰基、氟和三氟甲基. 研究表明,芳环上取代基对其分子表面电荷分布和空穴输运层薄膜形貌有显著影响,钙钛矿晶体颗粒的大小与空穴输运材料分子结构有关,含有氰基的材料D42最有利于形成较大的钙钛矿晶粒,这主要是由于吡咯并[3,2-b]吡咯结构具有丰富的电子性质的缘故. D42制备的倒置型平面钙钛矿太阳电池光电转换效率为17.3%,在黑暗条件下22天后,仍保留了初始效率的55%. 吡咯并[3,2-b]吡咯结构具有良好的给电子特性,可作为高效钙钛矿薄膜的空穴传输材料.     

千周和兆周范围的马氏体相变内耗以及预马氏体相变内耗

在千周和兆周两个频段分别测量了含Cd为46.1at％,47.5at％,50.0at％和52.5at％的AuCd合金中与马氏体转变有关的内耗和杨氏模量。实验结果表明,在千周范围,由于马氏体转变引起的Q^-1(内耗)是静滞后型的。Q^-1峰的形成可以用弹性软化及界面位错的静滞后阻尼机制来解释。而兆周范围的超声衰减是与频率有关的,表明尚有共振型及弛豫型阻尼的成份。此外,实验还观察到AuCd合金的等温马氏体转变Q^-1峰以及预马氏体相变Q^-1峰。 关键词：     

CFETR中性束注入系统概念设计

为了满足中国核聚变工程实验堆(CFETR)对等离子体加热和电流驱动的要求,从总体布局、束传输 系统、束源系统三方面进行了中性束注入系统的概念设计。利用参数计算的方法,根据聚变等离子体的要求明确 了中性束注入系统的性能指标和基本布局;利用束传输空间分布程序评估了束传输性能,确定了各功能部件的空 间布局结构;在此基础上,确定了束源系统的性能指标和引出系统布局方式,结合当前研发进展,明确了束源的 基本技术方案。由此完成了中性束注入系统参数指标、束传输关键尺寸、束源性能指标等设计要求,为后续工程 设计奠定了基础。     

单摆运动的非线性求解

本文给出了单摆运动非线性微分方程的精确解,并得到了单摆运动周期与初始条件的关系。当初始条件满足一定关系时,单摆的运动状态并不由初始条件唯一确定,而有两种可能,因此状态空间出现分支点,这是非线性方程解的特征.     

射频等离子硫钝化GaAs(100)的表面特性

采用射频等离子方法,对Ga As(100)衬底片表面进行干法硫等离子体钝化,旨在得到性能稳定含硫钝化层。样品经过360℃温度条件下的快速热退火,光致发光(PL)测试表明,钝化后的样品PL强度上升了71%。同时,钝化样品的稳定性测试结果表明,样品放置在实验室空气中30 d,其PL强度未出现明显变化,说明Ga As的等离子体干法硫钝化具有较好的性能稳定性。     

低密度稀土氧化物基气凝胶靶的研制

低密度的高原子序数元素氧化物气凝胶由于前驱体形成端基双键而易于收缩和开裂。通过调控配位环境结合无机分散溶胶凝胶法,制备了稀土氧化物气凝胶。氧化镧基气凝胶和氧化钇基气凝胶块体的成型性好,最低密度分别为0.05g·cm-3和0.06g·cm-3。其成分分别为六方相的La(OH)3和六方相的Y(OH)3,而聚丙烯酸中的羧基与稀土离子之间以桥接的方式进行配位。两种气凝胶均存在明显的多级结构,氧化镧基和氧化钇基气凝胶的初级粒子分别为纤维状和片/球混合形貌,而其二级粒子均为球形。两种气凝胶的比表面积分别为229.1m2·g-1和229.6m2·g-1。该方法制备的稀土氧化物气凝胶具有低的密度和纳米尺度的均匀性,在背光源中有潜在的应用。     

Improved performance of Au nanocrystal nonvolatile memory by N_2-plasma treatment on HfO_2 blocking layer

The N_2-plasma treatment on a HfO_2 blocking layer of Au nanocrystal nonvolatile memory without any post annealing is investigated. The electrical characteristics of the MOS capacitor with structure of Al–Ta N/HfO_2/Si O2/p-Si are also characterized. After N_2-plasma treatment, the nitrogen atoms are incorporated into HfO_2 film and may passivate the oxygen vacancy states. The surface roughness of HfO_2 film can also be reduced. Those improvements of HfO_2 film lead to a smaller hysteresis and lower leakage current density of the MOS capacitor. The N_2-plasma is introduced into Au nanocrystal(NC) nonvolatile memory to treat the HfO_2 blocking layer. For the N_2-plasma treated device, it shows a better retention characteristic and is twice as large in the memory window than that for the no N_2-plasma treated device. It can be concluded that the N_2-plasma treatment method can be applied to future nonvolatile memory applications.     

激光光解自由基的TR-ESR研究

时间分辨电子自旋共振（TR-ESR）技术是探测和鉴定光化学反应过程中顺磁性中间体的强有力工具,利用TR-ESR技术观察到的化学诱导动态电子极化 (CIDEP) 可以为我们提供丰富的光化学反应机理、反应动力学等信息. 该文较为详细地介绍了CIDEP的4种机理和自行研制的一种零差拍平衡混频的时间分辨ESR波谱仪,总结了TR-ESR技术在光解自由基反应方面的应用.     

一种多狭缝条纹变相管

设计了一种动态范围大、小型化条纹变相管,其时间分辨能力在2.6 ps左右,变相管的长度为196.532 mm,可以工作在单狭缝和多狭缝模式下,使得这种条纹变相管不但可以应用在激光核聚变、等粒子物理、激光技术、光生物、光化学等传统的超快诊断领域内,而且可以应用于海底探测以及空中预警等领域,可获得高速运动目标的三维空间+一维强度信息的探测.     

A contrastive study on the influences of radial and three-dimensional satellite gravity gradiometry on the accuracy of the Earth's gravitational field recovery

The accuracy of the Earth’s gravitational field measured from the gravity field and steady-state ocean circulation explorer(GOCE),up to 250 degrees,influenced by the radial gravity gradient V zz and three-dimensional gravity gradient V ij from the satellite gravity gradiometry(SGG) are contrastively demonstrated based on the analytical error model and numerical simulation,respectively.Firstly,the new analytical error model of the cumulative geoid height,influenced by the radial gravity gradient V zz and three-dimensional gravity gradient V ij are established,respectively.In 250 degrees,the GOCE cumulative geoid height error measured by the radial gravity gradient V zz is about 2 1/2 times higher than that measured by the three-dimensional gravity gradient V ij.Secondly,the Earth’s gravitational field from GOCE completely up to 250 degrees is recovered using the radial gravity gradient V zz and three-dimensional gravity gradient V ij by numerical simulation,respectively.The study results show that when the measurement error of the gravity gradient is 3×10 12 /s 2,the cumulative geoid height errors using the radial gravity gradient V zz and three-dimensional gravity gradient V ij are 12.319 cm and 9.295 cm at 250 degrees,respectively.The accuracy of the cumulative geoid height using the three-dimensional gravity gradient V ij is improved by 30%-40% on average compared with that using the radial gravity gradient V zz in 250 degrees.Finally,by mutual verification of the analytical error model and numerical simulation,the orders of magnitude from the accuracies of the Earth’s gravitational field recovery make no substantial differences based on the radial and three-dimensional gravity gradients,respectively.Therefore,it is feasible to develop in advance a radial cold-atom interferometric gradiometer with a measurement accuracy of 10 13 /s 2-10 15 /s 2 for precisely producing the next-generation GOCE Follow-On Earth gravity field model with a high spatial resolution.