交叉分子束方法研究H+CH4和H+CD4反应:CH3/CD3的振动激发态产物通道

We study the H+CH₄/CD₄→H₂/HD+CH₃/CD₃ reactions using the time sliced velocity map ion imaging technique. Ion images of the CH₃/CD₃ products were measured by the (2+1) resonance enhanced multi-photon ionization (REMPI) detection method. Besides the CH₃/CD₃ products in the ground state, ion images of the vibrationally excited CH₃/CD₃ products were also observed at two collision energies of 0.72 and 1.06 eV. It is shown that the angular distribution of the products CH₃/CD₃ in vibrationally excited states gradually vary from backward scattering to sideways scattering as the collision energy increases. Compared to the CH₃/CD₃ products in the ground state, the CH₃/CD₃ products in vibrationally excited states tend to be more sideways scattered, indicating that larger impact parameters play a more important role in the vibrationally excited product channels.     

无线传感器网络多跳路由协议研究

目的：无线传感器网络发展迅速,但传感器的高能耗问题成为制约其发展的主要瓶颈,高效节能的路由协议设计成为研究热点。方法：针对目前无线传感器网络常用的LEACH路由协议存在的簇首能耗过分集中、簇首分布不均衡问题,提出了改进的路由协议EEACRA,在总结、分析LEACH路由协议现有问题的基础上,给出了EEACRA路由协议的簇首选取门限值、簇首位置调整算法和基于能量代价最小的簇间多跳路由算法的实现方法,同时给出了具体的实现EEACRA协议的工作流程和关键算法。在MATLAB环境下对LEACH路由协议和EEACRA路由协议进行了仿真,对比了不同能耗降低措施对网络能耗降低的贡献。结果：仿真结果表明EEACRA路由协议的网络稳定期较LEACH路由协议有较大的改善。结论：证明了改进的路由协议EEACRA可以有效地提高网络的稳定期。     

激光诱导Ti等离子体电子温度的实验研究

室温,常压下,利用Nd∶YAG脉冲激光器产生的波长为1 064 nm, 脉宽12 ns,能量分别180, 230和280 mJ的脉冲激光冲击Ti靶,使用中阶梯光栅光谱仪检测了三种激光能量下对应的光谱。调节延时器DG645的延迟时间,检测了延迟0～500 ns时间范围内Ti等离子体对应激光能量下的发射光谱,分析光谱,可以得到了九条不同的的TiⅠ 和TiⅡ等离子体谱线,证明在该实验条件下,Ti靶能够充分吸收能量电离且离子谱线具有不同的演化速率,利用Saha-Boltzmann法计算并分析Ti等离子体电子温度,实验结果表明：相同的延迟时间,激光能量越大,谱线相对强度越大,电子温度越高,谱线相对强度的变化量随激光能量的变化量增大而增大;在延时0～150 ns内,三种激光能量下的等离子体电子温度和谱线的相对强度都随延迟时间的增加而快速下降,其中280 mJ激光能量下的等离子体电子温度和谱线强度下降速率较快;在150～250 ns范围内,电子温度和谱线强度均随延迟时间的增加有一个缓慢的上升,180 mJ激光能量下的等离子体电子温度和谱线强度的上升速率较快。250～500 ns范围内,三种激光能量下的电子温度和谱线强度均随延迟时间的增加而缓慢下降。     

（Ti,Al）N Film on Normalized T8 Carbon Tool Steel Prepared by Pulsed High Energy Density Plasma Technique

Under optimized operating parameters, a hard and wear resistant （Ti,Al）N film is prepared on a normalized T8 carbon tool steel substrate by using pulsed high energy density plasma technique. Microstructure and composition of the film are analysed by x-ray diffraction, x-ray photoelectron spectroscopy, Auger electron spectroscopy and scanning electron microscopy. Hardness profile and tribological properties of the film are tested with nano- indenter and ring-on-ring wear tester, respectively. The tested results show that the microstructure of the film is dense ahd uniform and is mainly composed of （Ti,Al）N and A1N hard phases. A wide transition interface exists between the film and the normalized T8 carbon tool steel substrate. Thickness of the film is about lO00nm and mean hardness value of the film is about 26 GPa. Under dry sliding wear test conditions, relative wear resistance of the （Ti, Al）N film is approximately 9 times higher than that of the hardened T8 carbon tool steel reference sample. Meanwhile, the （Ti,Al）N film has low and stable friction coefficient compared with the hardened T8 carbon tool steel reference sample.     

利用1 064 nm激光预处理提高pickoff镜损伤阈值

 激光预处理是提高光学元件损伤阈值的有效方法之一。利用输出1 064 nm基频激光的SAGA激光器,采用光栅刻线式扫描的方式对镀多层高反物理膜的pickoff镜进行了能量周期递增的预处理,验证激光预处理对其损伤阈值的提高效果。结果表明：零几率损伤阈值平均提高38.8%,而50%几率损伤阈值提高了7.6%,经过激光预处理后pickoff镜抗损伤能力较处理前有了一定提高。     

Strengthened Hyper-Raman Lines with the Coherent Superposition State

High-order harmonic generations from a one-dimensional Coulomb potential atom are calculated with the initial state prepared as a coherent superposition between its ground and first excited states. When the energy difference of the two states is small, we can choose proper laser pulse such that the first excited state can be excited only to other bound states instead of being ionized. We show that only the hyper-Raman lines are observable instead of the harmonics. The energy difference of the ground and the first excited state can be deduced from the highest peak of the hyper-Raman lines. We further show that the similar results can be obtained by using a combination of two laser pulses with different frequencies interacting with the atom initially at the ground state.     

不同气体环境下532nm激光诱导硅表面形貌的研究

研究了在不同气体环境下,利用532nmNd：YAG纳秒脉冲激光累积辐照单晶硅表面形成的微结构,结果表明,在其他条件相同,背景气体不同的情况下,背景气体对硅表面形貌的形成起着重要的作用。具体分析了真空、N2和SF6 3种环境气氛下形成的微结构,结果显示,在sF6中形成的锥形微结构的数密度比在N2和真空中的大,并且锥形具有更大的纵横比;在N2、真空和sF6中形成的微结构尺寸依次减小。sF6气氛下,激光辅助化学刻蚀的效率比在真空和N2气氛中的高。另外,辐照区域边缘有波纹微结构形成,分析认为,该微结构的形成是由表面张力波的冷却导致的。     

Surface modification of polytetrafluoroethylene film using single liquid electrode atmospheric- pressure glow discharge

Polytetrafluoroethylene films are treated by room temperature helium atmospheric pressure plasma plumes, which are generated with a home-made single liquid electrode plasma device. After plasma treatment, the water contact angle of polytetrafluoroethylene film drops from 114°to 46°and the surface free energy increases from 22.0 mJ/m2 to 59.1 mJ/m2. The optical emission spectrum indicates that there are reactive species such as O2+ , O and He in the plasma plume. After plasma treatment, a highly crosslinking structure is formed on the film surface and the oxygen element is incorporated into the film surface in the forms of -C-O-C-, -C=O, and -O-C=O groups. Over a period of 10 days, the contact angle of the treated film is recovered by only about 10 , which indicates that the plasma surface modification is stable with time.     

斜入射激光等离子体堵口时空特性研究

在“星光II”上首次利用X光12分幅相机(XFC)成功地观测到了1.053 μm激光以45°方向斜入射孔靶和半腔靶等离子体堵口的时间和二维空间图象,获得了等离子体堵口速度,同时通过一维模型给出了斜入射条件下的等离子体堵口速度。实验结果表明：相同参数条件下半腔靶与孔靶相比,等离子体喷射速度高约15%。一维模型给出的等离子体喷射速度与XFC测出的等离子体喷射速度在实验误差范围内是一致的。     

解计算题的方法巧谈

计算题是运用数学的手段解决物理问题的一种题型,其特点是: 1.物理知识的综合运用性强 学生必须具有全面地、熟练地掌握物理概念、规律、公式的基础,才能着手解这种题。解题中,又要求学生对物理公式不能死记硬套,要充分理解公式中各量代表什么?公式表述的物理意义是什么?适用的条件是什么?才能达到灵活运用。 2.数学知识的运用性强 解题中,要求学生学会代数式的移项、变形,会乘除化简,会指数运算,会列方程式,解联立方程组等。 3.物理单位运用性强 解这种题,即使公式用对了,计算方法正确,但用错了单位,常造成错