用Reichardt''''s Dye研究碳酸酯溶剂极性的经验参数ET(30)

使用2,6-二苯基-4-(2,4,6-三苯基-1-吡啶鎓)苯氧内盐染料(Reichardt's Dye)研究锂离子电池中非水电解质溶剂碳酸酯的极性,并测量极性经验参数ET(30)碳酸乙烯酯为48.6,碳酸丙烯酯为46.1,2,3-碳酸丁烯酯为45.7,碳酸二甲酯为39.0,碳酸甲乙酯为37.3,碳酸二乙酯为37.0.LiClO4加入到碳酸酯溶剂中,显色剂受到离子的盐效应影响,表现为溶液体系的ET(30)值增加,极性增大.由于溶液中粒子间的相互作用不同,环碳酸酯与链状碳酸酯极性变化趋势不同.极性大的溶剂易形成Ar-O-…solvent…Li+结构,起到缓冲作用,抑制了显色剂的酚氧基与Li+直接作用.     

含芯电子相关能修正的G2理论——G2(ful)

A general method in considering the core electronic correlation energies has been proposed and introduced into the standard Gaussian-2 (G2)[7] theory by small post-Hartree-Fock calculations. In this paper an additional MP2(FC)/6-31G(d) calculation over the G2 procedures is employed and examined in modification in modification to the flaw of Frozen-Core (FC) approximation of G2 vai eq.:
ΔE(full)= E[MP2(full)/6-31G(d)]-E[MP2(FC)/6-31G(d)]
where the MP2(full)/6-31G(d) energy has been obtained in the molecular geometry optimizations. This energy, ΔE(full), is directly added into the total G2 energy of a molecule in facilitating the effect of core electronic correlations for each molecule in chemical reactions. It has been shown that the over-all average absolute deviation for the 125 reaction energies of the G2 test set (test set 1) is slightly reduced from 5.09 to 5.01 kJ, mol(-1) while for the 55 D0 values, which have been used for the derivation of the A coefficient of the empirical High-Level...更多-Correction (HLC), it is also reduced from 4.99 [for both G2 and G2(COMPLETE)[8]]to 4.77 kJ• mol(-1). In addition, larger errors (greater than ±8.4 kJ•mol(-1) for the D0 energies are improved, especially for the largest error of the D0 of SO2 This error is reduced from 21.3 to 15.4 kJ. mol(-1), in which the experimental geometry would further reduce it by 7.1kJ.mol(-1)[8]. Another improvement is the absolute value of the A coefficient in HLC being reduced from 4.81 for G2 to 4.34 milli-hartrees which is believed to be useful in isolating the relationship between the HLC and the FC approximation. Modifications to the original G2 from this work is denoted as G2(fu 1) and thus the G2 (fu 1) total energy for a molecule is
E[G2(fu 1)]= E[G2]+Δ E(full)h
with a new ΔE[HLC] =-0.19α- 4.34nβ milli-hartree.     

某些离解能、电子亲合能等的G2计算与评价

PoPle及其合作者创立的Gaussian再简称GZ）理论［‘－’］，以其相对可靠的化学精度和相应较小的计算量已经引起了实验和理论化学家们的广泛关注问．p。ple等人在他们的GZ文章中强调了GZ的理论计算结果在研究离解能等化学问题中与精确实验数据之间的偏差普遍不大于全8．狄J规厂‘．我们近期的研究表明＊’1，＊2和优（＊则在计算一般化学反应能量中，绝大多数情况下，分别都能保证结果与实验偏差在全8．4和士13kJ·mol‘以内．近年来，已有大量的研究工作表明，GZ的理论结果已广泛用于未知实验数据的预测、已有实验数据的评价和修正等…     

Vibrational Spectroscopic Study on Ion Solvation and Association of Lithium Perchlorate in 4-Methoxymethyl-ethylene Carbonate

Solvation interaction and ion association in solutions of lithium perchlorate/4-methoxymethyl-ethylene carbonate （MEC） have been studied by using Infrared and Raman spectra as a function of concentration of lithium perchlorate. The splitting of ring deformation band and ring ether asymmetric stretching band, and the change of carbonyl stretching band suggest that there should be a strong interaction between Li^＋ and the solvent molecules, and the site of solvation should be the oxygen atom of carbonyl group. The apparent solvation number of Li^＋ was calculated by using band fitting technique. The solvation number was decreased from 3.3 to 1.1 with increasing the concentration of LiClO4/MEC solutions. On the other hand, the band fitting for the ClO4^- band revealed the presence of contact ion pair, and free ClO4^- anion in the concentrated solutions.     

氧化锡表面的原子簇模型计算

Cluster models of SnO2(110) face and oxygen vacancies and oxygen adsorption on its surface have been calculated by EHMO method. The results show that a tin atom with a coordination number of four is the adsorption center, because the total energy of cluster model becomes lower when an oxygen atom adsorpts on the tin atom with a coordination number of four. The tin atom with this coordination number gains and loses electrons more easily than tin atoms with a coordination number of five. All tin atoms in the cluster of SnO2(110) face are Sn4+.     

添加剂PVP和MTS对合成Beta分子筛结构与性能的影响

分别以铝酸钠和硅溶胶为铝源和硅源,四乙基氢氧化铵为模板剂,在水热条件下,考察了添加剂(聚乙烯吡咯烷酮(PVP)和甲基三乙氧基硅烷(MTS))对合成Beta分子筛结构与性能的影响,并通过XRD、TEM、BET、ICP、~(29)Si-NMR和NH_3-TPD等方法对合成样品进行了结构表征和作用机理讨论,同时以催化裂化异丙苯为模型反应评价其催化性能。结果表明,与传统Beta分子筛相比,加入PVP后所得样品具有更高结晶度和较高的硅铝物质的量比(25.68)以及较大的比表面积(772 m~2/g);而加入MTS后尽管具有较大比表面积(657 m~2/g)和较高硅铝物质的量比(25.76),但是结晶度却相对降低,且粒径减小(160-320 nm)。两种添加剂作用下所得样品均具有更多酸量,在催化裂化异丙苯的反应中表现出较高的催化活性。     

层状多硫代锑(Ⅲ)酸镉(Ⅱ)化合物(1,4-DABH2)Cd2Sb2S6的溶剂热合成与表征

利用溶剂热方法合成了层状多硫代锑髥酸镉髤化合物(1,4-DABH2)Cd2Sb2S6(1)(1,4-DAB=1,4-丁二胺),并通过红外光谱、热重分析对其进行了表征,用X-射线衍射测定了化合物的单晶结构。单晶解析表明,化合物属正交晶系,Cmca空间群,Mr=750.77,a=0.860 3(5)nm,b=0.898 7(6)nm,c=2.273(2)nm,V=1.758(2)nm3,Z=4,λ=0.071 073 nm,R=0.032,wR=0.106 7。晶体结构中含有六元环的Cd2SbS3和八元环的Cd2Sb2S4的阴离子网络层状[CdSbS3]nn-,双质子化的有机阳离子在阴离子层之间以氢键N-H…S形式连接。另外紫外-可见漫反射光谱研究表明,化合物为半导体。     

改性钛基PbO2电极的制备及其对COD的快速检测

通过制备Ti/α/β-PbO₂、Ti/Ag/β-PbO₂这两种含有不同中间层的钛基二氧化铅电极来探究电催化氧化技术快速测定葡萄糖模拟废水中有机物(COD)含量的可行性。为了评估两种电极的各项性能,首先采用扫描电镜(SEM)、X射线衍射(XRD)对电极进行形貌表征,其次进行电化学性能测试包括线性伏安曲线(LSV)、塔菲尔曲线(Tafel)、循环伏安曲线(CV)以及交流阻抗测量分析。结果表明,Ti/α/β-PbO₂电极表面晶体结构更加均匀,晶粒尺寸偏小,具有更大的电活性表面积。Ti/α/β-PbO₂电极的析氧电位为1.77 V,为·OH的产生提供良好条件。在Tafel、CV测试中,Ti/α/β-PbO₂电极的交换电流密度i₀及比电容C_p分别为0.0995 A·cm^-1、0.004098 F·cm^-1均高于Ti/Ag/β-PbO₂电极,说明Ti/α/β-PbO₂电极的耐腐蚀性以及释放电子的能力优异。最终选用Ti/α/β-PbO₂电极为工作电极。Ti/α/β-PbO₂电极检测COD的最佳条件为：氧化电位1.30 V、电解时间150 s、电解液浓度0.03 mol·L^-1 硝酸钠(NaNO₃)。电化学法与比色消解法测定COD的相关系数可达0.9909,同时具有良好的重现性与相关性,COD的检测范围为0 mg·L^-1 ~ 500 mg·L^-1。在误差允许的范围内可以替代标准的重铬酸钾法,为实现COD的在线快速检测提供参考价值。