Realization of MMI Power Splitter by UV-light Imprinting Technique Using Hybrid Sol-Gel SiO2 Materials

An efficient fabrication scheme of buried ridge waveguide devices is demonstrated by UV-light imprinting technique using organic-inorganic hybrid sol-gel Zr-doped SiO2 materials. The refractive indices of a guiding layer and a cladding layer for the buried ridge waveguide structure are 1.537 and 1.492 measured at 1550nm, respectively. The tested results show more circular mode profiles due to existence of the cladding layer. A buried ridge single-mode waveguide operating at 1550 nm has a low propagation loss （0.088 dB/cm） and the 1× 2 MMI power splitter exhibits uniform outputs, with a very iow splitting loss of 0.029 dB at 1549nm.     

激光二极管自混合干涉和微振动的实验观测

介绍了利用LabView软件虚拟示波器和信号源,对激光二极管自混合干涉和微振动进行的实验观测.该实验可以作为本科低年级学生的综合设计实验.     

Influence of Yb-Doped Nanoporous TiO2 Films on Photovoltaic Performance of Dye-Sensitized Solar Cells

Yb-doped TiO2 pastes with different Yb/TiO2 weight ratios are prepared in the sol-gel process to obtain dyesensitized solar cells （DSCs）. The nanocrystalline size of Yb-TiO2 becomes smaller and the lattice parameters change. Lattice distortion is observed and dark current is detected. It is found that a part of Yb existing as insulating oxide Yb2O3 state acts as barrier layers at the electrode-electrolyte interface to suppress charge recombination. A Yb-doped TiO2 electrode applied in DSCs leads to a higher open-circuit voltage and a higher fill factor. How the Yb-doped TiO2 films affect the photovoltaic response of DSCs is discussed.     

Synthesis of GaN Nanorods by Ammoniating Ga2O3/ZnO Films

Large quantities of CaN nanorods are successfully synthesized on Si（111） substrates by ammoniating the films of Ga2O3/ZnO at 950℃ in a quartz tube. The structure, morphology and optical properties of the as-prepared CaN nanorods are studied by x-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and photoluminescence. The results show that the CaN nanorods have a hexagonal wurtzite structure with lengths of several micrometres and diameters from 80 nm to 300hm, which could supply an attractive potential to harmonically incorporate future GaN optoelectronic devices into Si-based large-scale integrated circuits. The growth mechanism is also briefly discussed.     

气相色谱-质谱联用法测定维生素C泡腾片中的甜蜜素

采用气相色谱-质谱(GC-MS)选择离子监测法(SIM),建立了准确可靠、灵敏度高、快速简便的测定维生素C泡腾片中甜蜜素含量的新方法.样品中的甜蜜素衍生后用有机试剂提取,在选择离子模式下进行测定,以保留时间和特征离子比例进行定性,单离子定量.甜蜜素的线性范围为0.05-10mg/L,检出限为0.6mg/kg,回收率为90.5%-96.9%,相对标准偏差小于4.4%.方法分析所用时间短,结果准确可靠,选择性好,适用于维生素C泡腾片中甜蜜素含量的检验.     

掩埋式多模干涉型分束器的反射性能

通过束传播方法(BPM)模拟了SiO2基掩埋式波导结构多模干涉(MMI)型分束器的反射性能,模拟结果表明,MMI工作在分束模式时存在最优的多模干涉长度实现最大输出和最小反射,而在合束模式下实现最大输出时反射也达到最大,这是由自映象原理决定的。SiO2基掩埋式波导结构MMI分束器对反射具有良好的抑制作用,其最大反射功率为-60dB。分析表明,多模干涉区末端的界面反射率决定了器件的反射强弱,SiO2基掩埋式波导的界面反射率非常低,这是其低反射的原因。     

面向成本-收益好的无标度耦合网络构建方法

较大平均路径长度的网络会带来较大的网络延迟, 难以支持时间敏感业务与应用. 通过增加连接可以降低源和目的节点之间的跳数, 进而降低网络平均延迟, 使得更加快速地传播信息, 但是增加连接的同时也增加了网络构建成本. 分层网络是研究网络耦合的一个有效方法, 但目前网络构建过程中将每层网络分别处理并认为每层网络之间没有强相关性. 本文提出了一种面向成本-收益的无标度网络动态构建方法. 此方法将网络分为多层, 基于连续论在高层网络中添加连接, 使得网络演化为无标度网络. 此连续过程包括节点度增加过程和局部网络半径增长两个连续过程, 在增加连接的过程中引入表征网络构建成本和收益的成本-收益指标. 模拟结果表明引入成本-收益指标的无标度耦合网络构建方法能够在合理范围内有效降低网络平均路径长度, 提升网络性能, 并且本文给出了耦合网络的动态业务性能, 通过调整高层网络避免网络拥塞.     

Efficient scheme of quantum SWAP gate and multi-atom cluster state via cavity QED

In this paper, we propose a physical scheme to realize quantum SWAP gate by using a large-detuned single-mode cavity field and two identical Rydberg atoms. It is shown that the scheme can also be used to create multi-atom cluster state. During the interaction between atom and cavity, the cavity is only virtually excited and thus the scheme is insensitive to the cavity field states and cavity decay. With the help of our scheme it is very simple to prepare the N-atom cluster state with perfect fidelity and probability. The practical feasibility of this method is also discussed.     

二苯基乙二胺在银胶表面吸附的表面增强拉曼光谱研究

以银纳米粒子作为SERS活性基底,研究了二苯基乙二胺(DPEDA)在银表面的吸附行为,并研究了溶液的pH值和DPEDA的浓度对吸附构型的影响。对比DPEDA的Raman和SERS谱图,可以认为DPEDA是通过氮原子的孤对电子吸附在银胶表面。在酸性介质中DPEDA的氨基被质子化生成胺正离子,导致DPEDA不容易吸附到银胶表面,所以DPEDA的SERS信号强度随着溶液酸性的增加而减弱。DPEDA的浓度变化对其吸附构型中芳香环的取向影响不大,但是其C-N键与表面的角度会有一定的变化。从SERS光谱得到的信息可以加深我们对DPEDA修饰的金属催化剂的多相不对称催化机理的认识。