BESIII barrel time-of-flight （TOF） calibration using cosmic ray data

The principle of the method for the BESIII TOF calibration using cosmic ray data without magnetic field are reported in this paper. After applying calibration constants, the single-end readout time resolution could reach about 150 ps, and the time resolution for one layer is achieved to be about 110 ps. The paper also described the extraction scheme for the event start time of cosmic events.     

Decay vertex reconstruction and 3-dimensional lifetime determination at BESⅢ

This paper focuses mainly on the vertex reconstruction of resonance particles with a relatively long lifetime such as Ks^0, A, as well as on lifetime measurements using a 3-dimensional fit. The kinematic constraints between the production and decay vertices and the decay vertex fitting algorithm based on the least squares method are both presented. Reconstruction efficiencies including experimental resolutions are discussed. The results and systematic errors are calculated based on a Monte Carlo simulation.     

Track reconstruction in the BESⅢ muon counter

The reconstruction algorithm for BESⅢ Muon Counter, MucRecAlg, is developed with the objectoriented language C＋＋ in BESⅢ offine software environment. MucRecAlg consists of the following functions：to find track seeds either from extrapolation of tracks in the main drift chamber or from the fired strips in muon counter, to select fired strips associated to the candidate tracks, to fit the candidate tracks with a linear or quadratic function and to calculate other parameters of the tracks for muon identification. Monte Carlo samples are generated to check the performance of the reconstruction package, such as reconstruction effciency, muon remaining rate and pion rejection rate, etc. The preliminary results show that the pion rejection rate is around 3%—4% while the muon remaining rate is better than 90% in 0.4—1.6 GeV/c momentum region, which meets the requirement as shown in the design report.     

Li+和Er3+掺杂对Ba2SiO4：Eu2+发光性能的影响

采用化学沉淀法一次煅烧工艺制备了Ba_1.99-x/2-2ySiO₄:Eu_0.01²⁺, Li_x+y²⁺, Eu_y³⁺绿色荧光粉, 用X射线衍射仪和荧光分光光度计对样品的晶体结构、发光性能进行表征. 结果表明: 少量Eu²⁺, Li⁺和Er³⁺的共掺杂没有改变晶体结构; 其激发光谱分布在270–440 nm波长范围, 谱峰位于288 nm, 360 nm处, 可以被InGaN 管芯产生的360–410 nm辐射有效激发; 在360 nm近紫外光激发下, 测得其发射光谱峰值在500 nm 处, 是Eu²⁺4f⁶5d¹→4f⁷跃迁的典型发射; 荧光粉发光强度随着Li⁺掺杂量的增大先增强, 后减弱, 当x=0.1时, 发光强度最大; 随着Li⁺, Er³⁺共掺杂量的增加(y=0.012), 出现位于530 nm和488 nm的发射峰, 对应于Er³⁺的²H_11/2→⁴I_15/2和⁴F_7/2→⁴I_15/2特征发射, 同时分析了Eu²⁺→Er³⁺的能量传递过程. 关键词： 化学沉淀法 2SiO₄：Eu²⁺,Li⁺,Er³⁺')" href="#">Ba₂SiO₄：Eu²⁺,Li⁺,Er³⁺ 能量传递 发光性能     

Supramolecular Assemblies in Salts of 2,2＇-Biimidazole with 5-Sulfosalicylic Acid and 3,4,5-Trihydroxybenzoic Acid

Supramolecular assemblies of 2,2＇-biimidazole with 5-sulfosalicylic acid and 3,4,5-trihydroxybenzoic acid, have been synthesized and characterized by single-crystal X-ray diffraction methods. Both the two proton-transfer compounds of 2,2＇-biimidazole with 3-carboxy-4-hydroxybenzenesulfonic acid （5-sulfosalicylic acid, 5-SSA） [namely bis（2-（2-1H-imidazolyl）-1H-imidazolium） 4-hydroxybenzene-3-carboxylate-1-sulfonate monohydrate, 2（C6HTN4）^＋· CTH4068^2-.H2O, （Ⅰ）] and 3,4,5-trihydroxybenzoic acid [namely 2,2＇-bi-1H-imidazolium bis（3,4,5-trihydroxybenzoate） tetrahydrate, C6H8N4^2＋ ·2（C7H5O5）^-·4（H20）, （Ⅱ）] feature extensively hydrogen-bonded three-dimensional network structures having significant interlayer n-n interactions between the cation and anion species. In Ⅰ, a 5-SSA^2- dianionic species results from deprotonation of both the sulfonic and the carboxylic acid groups, all available O-atom acceptors interact with all cation and water molecule donors by hydrogen bonds. In Ⅱ, the formula unit displays a crystallographic inversion symmetry. The structural information about the two complexes between 2,2＇-biimidazole compound and benzenecarboxylic acids obtained in this work will be particularly important for the rational design of supramolecular organic functional materials.     

AgDDC比色法测定砷吸收液的改进

目前用二乙基二硫代氨基甲酸银(AgDDC)比色法测定砷时多用AgDDC-三乙醇胺/氯仿溶液作为砷化氢的吸收液。氯仿有沸点低(61.5℃),毒性较大,使用和贮藏过程中易产生光气等缺点;1,2-二氯乙烷沸点较高(83.5℃),毒性较小,工作场所的允许浓度比氯仿高一倍。经试验表明,改用1,2-二氯乙烷代替氯仿所配制的吸收液吸收效果和稳定性均不亚于甚至优于氯仿。因此这一改进不仅有益于分析人员的身体健康,而且也给分析操作带来方便。     

环烯丙基溴在Cu/SnCl2参与的水相羰基烯丙基化反应中的应用

Five- and six-membered cyclic allylic halides were found to be much less reactive than the acyclic allylic halides in aqueous allylation reactions. Nevertheless, it was found that SnC12/Cu was powerful enough to mediate the aqueous allylation reactions involving cyclic allylic halides. Both the aliphatic and aromatic aldehydes could be efficiently allylated and the reaction condition was mild, simple and safe. The yields were usually in 75%-97% and the reaction was erythro selective.     

辨析经济时间序列趋势问题的探讨

本文讨论了趋势平稳过程和与随机趋势过程在概念和经济涵义上的区别,利用渐近分布理论对于两种过程参数的统计关系进行了研究,从实践和理论上说明警惕单位根检验低功效的必要性,认为陆懋祖~[1]的观点值得商榷。最后针对单位根检验理论本身及国内学者在实践应用中存在的一些问题提出对策与建议。     

三次Hermite插值方法在证券投资分析中的应用

利用三次Hermite插值公式给出了寻找曲线之间相似程度的算法,对于给定股票的任意一段曲线形状,文章利用该算法找出走势与之相似的股票,将原来只能寻找股价曲线满足特定形状(如W底)的股票的方法进行了推广,对于证券投资者来说是一个有效的工具.同时文章将相似算法应用于利用某只股票的历史走势来预测该股票价格的将来走势,具有有效的投资指导意义.实验证明,文章给出的算法是行之有效的.     

拉伸偏心椭圆孔板的应力集中系数表达式

先用半解析半经验的方法推导出拉伸中心椭圆孔有限宽板应力集中系数的显式表达式．将其计算结果和Durelli的光弹性实验结果、Isida公式以及有限元分析结果比较可知,新推导公式的精度较高,且适用范围更广．再用类似的方法推导出拉伸偏心椭圆孔板应力集中系数的显式表达式．经与Isida的公式和有限元分析结果比较可知,该公式适用范围更广、精度更高．当偏心距在一定范围内,误差小于8%．根据应力集中系数与应力强度因子的关系,由已得到的应力集中系数得出拉伸中心裂纹有限宽板和拉伸偏心裂纹板的应力强度因子．经与已有公式以及有限元分析结果比较可知,该应力强度因子表达式也有足够的精度．