Halogen-substituted thiophenol molecules on Cu(111)

Para-halosubstituted thiophenols (X-TPs, where X is Br, Cl, or F) form ordered islands and monolayers on Cu(111) at temperatures as low as 81 K. At incomplete coverages, all X-TPs adsorb with the dehydrogenated thiol group attached to the substrate and the substituted ring inclined toward the surface, as verified experimentally and theoretically. The structure of ordered islands has a pronounced dependence on the nature of the halogen substituent: while unsubstituted TP and pentafluoro-TP molecules do not self-assemble into extended ordered patterns at 81 K, X-TP molecules form a range of different structures which depend both on the size and electronegativity of the substituent, as well as on the coverage.     

Chemical constituents of Glycosmis citrifolia (Willd.) Lindl. Structures of four new acridones and three new quinolone alkaloids

The structures of two new dimeric acridone alkaloids, glycobismine-D (1) and -E (2), having a novel linkage as binary acridones, three monomeric acridones, glycocitrine-IV (3), -V (4), and -VI (5), and three quinolone alkaloids, glycocitlone-A (6), -B (7), and -C (8) from Glycosmis citrifolia (Willd.) Lindl. (Rutaceae) have been elucidated by spectrometric studies.     

Novel binding of beryllium to dicarboxyimidazole-based model compounds and polymers

The ligand 4,5-dicarboxyimidazole (H(2)DCI) and its methyl derivative 1-methyl-4,5-dicarboxyimidazole (H(2)MDCI) have been shown to bind to Be(II) forming a zwitterionic species that has been structurally characterized. A new dicarboxyimidazole-based polymer has been prepared and its Be-binding properties have been studied using NMR ((1)H and (9)Be) and fluorescence spectroscopy; it represents a rare example of beryllium binding to a polymer. Models of the mononuclear and polymeric Be(II)-binding sites have been studied using density functional theory (DFT), and the (9)Be NMR chemical shifts of these model materials have been calculated for the purpose of direct comparison to experimentally observed values. Differences in the binding modes of the mononuclear and polymeric species are discussed.     

层状MAgTeS3 (M＝K, Rb)的溶剂热合成与表征

以硫醇为螯合剂, 在溶剂热条件下合成了两种层状硫代亚碲酸盐KAgTeS₃ (1)和RbAgTeS₃ (2). X射线单晶解析表明, 1和2是类质同晶化合物. 在晶体结构中, 银硫四面体通过共用顶点形成无限的平行链, 在相邻链中银硫四面体取向相反, 这些链与链由三角锥配位的碲互相连接形成阴离子层状结构, 阳离子在阴离子层间. 1的结晶学数据为: M_r＝370.75, P2₁/c, a＝0.73639(6) nm, b＝1.06468(8) nm, c＝0.85203(6) nm, β＝106.4640(10)°, V＝0.64062(8) nm³, Z＝4, R(F)＝4.44%, wR(F²)＝11.66%. 2的结晶学数据: M_r＝417.12, P2₁/c, a＝0.75531(12) nm, b＝1.07076(7) nm, c＝0.8583(2) nm, β＝106.497(6)°, V＝0.66558(19) nm³, Z＝4, R(F)＝6.00%, wR(F²)＝15.43%. DSC及紫外-可见漫反射光谱研究表明, 这两种化合物为半导体, 并具有很好的热稳定性.     

红外光谱法研究LB膜中的分子取向

The structure information of orientation and packing of molecular chains can be obtained from infrared transmission and reflection-absorbance (RA) spectra. In the present paper, on the basis of Umemura et al., their FORTRAN program of minicomputer was developed and can be run on 486 personal computer. By comparison of infrared transmission and RA intensities, surface enhancement factors and molecular orientation angle were calculated using the above program, and the influence of complex refractive index, angle of incidence, and thickness of LB film were discussed. These results are consistent with that of Umemura et al.     

Click chemistry to construct fluorescent oligonucleotides for DNA sequencing

"Click chemistry" 1,3-dipolar cycloaddition between alkynyl 6-carboxyfluorescein (FAM) and azido-labeled single-stranded (ss) DNA was carried out under aqueous conditions to produce FAM-labeled ssDNA in quantitative yield. The FAM-labeled ssDNA was successfully used as a primer to produce DNA sequencing products with single-base resolution in a capillary electrophoresis DNA sequencer with laser-induced fluorescence detection.     

Ce(III)在辣根体中的迁移

应用放射性同位素示踪法, 即结合放射自显影和液体闪烁器检测及电镜放射自显影技术, 首次定性、定量地研究Ce(III)离子在辣根植物中的迁移. 结果表明: (1) Ce(III)离子能被辣根植物吸收并随时间发生迁移; (2)电镜放射自显影结果显示, Ce(III)离子迁移是通过质外体至共质体进入细胞的. Ce(III)离子在辣根植物体中的行为, 为稀土离子植物环境效应机理及辣根植物安全防护提供借鉴.     

缓冲溶液pH计算公式的推导

酸碱缓冲溶液在分析化学中的应用是多方面的 ,因此酸碱缓冲溶液 ｐＨ的计算是分析化学中必不可少的一个内容。目前 ,高师院校的分析化学多采用华中师范大学等校编的《分析化学》(第 2版 ) ,笔者在几年的教学中 ,发现该教材在缓冲溶液 ｐＨ计算的公式推导中存在疏漏。为此 ,在比较其他教材中该章节的内容后 ,从酸碱平衡最本质的内容ＰＢＥ出发 ,提出一种新的缓冲溶液ｐＨ计算公式推导方法。1　华中师范大学版教材中的问题[1]　　以一元弱酸及其共轭碱体系进行讨论 ,设弱酸ＨＡ浓度为ｃａ,共轭碱ＮａＡ浓度为ｃｂ。将ＨＡ Ａ-体系以Ｈ2 Ｏ作媒…     

高稳定性CaO-ZrO2固体碱催化剂的表征和催化性能

用共沉淀法经高温焙烧制备了CaO摩尔分数从10%至50%的CaO-ZrO₂系列催化剂, 将其应用于碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程, 并通过XRD, FT-IR, BET, ICP, CO₂-TPD, XPS等表征手段研究了催化剂的物性及其催化性能随组成变化的的规律. 结果表明, 当CaO摩尔分数高于30%时, 表面出现游离的CaO, 虽然具有强碱性和高活性, 但是稳定性差; 而当CaO摩尔分数低于30%时, Ca^2＋进入ZrO₂晶格, CaO与ZrO₂形成连续固溶体, 并且随着CaO含量的增加, 晶格氧的电荷密度增加, 催化剂的碱性增强, 使得CaO-ZrO₂催化剂在碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程中获得了高活性和高稳定性.     

氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。