孕妇缺锰及防治

已测试了12000件孕妇头发微量元素，缺锰最普遍，达65%以上，对孕妇缺锰的防治提出了建议．     

Chromatography,mass spectrometry,and molecular modeling studies on ammodytoxins

The ammodytoxins (Atxs) are neurotoxic phospholipases which occur in Vipera ammodytes ammodytes (Vaa) snake venom. There are three Atx isoforms, A, B, and C, which differ in only five amino acid positions at the C-terminus but differ substantially in their toxicity. The objective of this study was to establish an analytical method for unambiguous identification of all three isoforms and to use the method to assess a procedure for purification of the most toxic phospholipase, AtxA, from the venom. Isolation procedure for AtxA consisted of isolation of Atx-cross-reactive material (proteins recognized by anti-Atx antibodies), by use of an affinity column, then cation exchange on CIM (Convective Interaction Media) disks. The purification procedure was monitored by means of reversed-phase chromatography (RPC) and mass spectrometry (MS). Although previous cation exchange of the pure isoforms enabled separate elution of AtxA from B and C, separation of AtxA from Atxs mixture was not accomplished. RPC was not able to separate the Atx isoforms, whereas an MS based approach proved to be more powerful. Peptides resulting from tryptic digestion of Atxs which enable differentiation between the three isoforms were successfully detected and their sequences were confirmed by post-source decay (PSD) fragmentation. Separation of Atx isoforms by ion-exchange chromatography is most presumably prevented by Atxs heterodimer formation. The tendency of Atxs to form homodimers and heterodimers of similar stability was confirmed by molecular modeling.     

Characterization by electrospray ionization and tandem mass spectrometry of rhamnolipids produced by two Pseudomonas aeruginosa strains isolated from Brazilian crude oil

In this work, biosurfactants produced by two Pseudomonas aeruginosa strains isolated from Brazilian crude oils were identified by proton nuclear magnetic resonance ((1)H NMR) and further characterized by mass spectrometry (MS) coupled with electrospray ionization (ESI) and tandem mass spectrometry (MS/MS) analysis in positive mode and their surface activities evaluated. Mono-rhamnolipids and di-rhamnolipids were identified for both isolates, but the most abundant were found to be mono-rhamnolipids. The similarity of rhamnolipids produced by the two strains was in good agreement with their surface activities. Both biosurfactants exhibited similar aqueous solution surface tensions, high emulsification indexes and critical micelle concentration values. The results obtained show that ESI-MS and MS/MS analysis alone provide a fast and highly specific characterization of biosurfactants produced by microbial strains.     

Spectroscopic, structural, and conformational properties of (Z)-4,4,4-trifluoro-3-(2-hydroxyethylamino)-1-(2-hydroxyphenyl)-2-buten-1-one, C12H12F3NO3: a trifluoromethyl-substituted β-aminoenone

The (Z)-4,4,4-trifluoro-3-(2-hydroxyethylamino)-1-(2-hydroxyphenyl)-2-buten-1-one (C(12)H(12)F(3)NO(3)) compound was thoroughly studied by IR, Raman, UV-visible, and (13)C and (19)F NMR spectroscopies. The solid-state molecular structure was determined by X-ray diffraction methods. It crystallizes in the P2(1)/c space group with a = 12.1420(4) ?, b = 7.8210(3) ?, c = 13.8970(5) ?, β = 116.162(2)°, and Z = 4 molecules per unit cell. The molecule shows a nearly planar molecular skeleton, favored by intramolecular OH···O and NH···O bonds, which are arranged in the lattice as an OH···O bonded polymer coiled around crystallographic 2-fold screw-axes. The three postulated tautomers were evaluated using quantum chemical calculations. The lowest energy tautomer (I) calculated with density functional theory methods agrees with the observed crystal structure. The structural and conformational properties are discussed considering the effect of the intra- and intermolecular hydrogen bond interactions.     

Organocatalytic enantioselective synthesis of 2,3-dihydropyridazines

We have developed an efficient procedure for the easy and straightforward preparation of functionalized dihydropyridazines as highly enantiopure materials by reaction of pyruvaldehyde 2-tosyl hydrazone with a variety of α,β-unsaturated aldehydes using a chiral secondary amine as catalyst. The overall process consists of a cascade reaction involving an initial aza-Michael reaction, in which the stereocentre is installed, followed by an intramolecular aldol reaction/dehydration step.     

Theoretical insights into the ferromagnetic coupling in oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear complexes with aromatic diimine ligands

Two novel heterobimetallic complexes of formula [Cr(bpy)(ox)(2)Co(Me(2)phen)(H(2)O)(2)][Cr(bpy)(ox)(2)]·4H(2)O (1) and [Cr(phen)(ox)(2)Mn(phen)(H(2)O)(2)][Cr(phen)(ox)(2)]·H(2)O (2) (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and Me(2)phen = 2,9-dimethyl-1,10-phenanthroline) have been obtained through the "complex-as-ligand/complex-as-metal" strategy by using Ph(4)P[CrL(ox)(2)]·H(2)O (L = bpy and phen) and [ML'(H(2)O)(4)](NO(3))(2) (M = Co and Mn; L' = phen and Me(2)phen) as precursors. The X-ray crystal structures of 1 and 2 consist of bis(oxalato)chromate(III) mononuclear anions, [Cr(III)L(ox)(2)](-), and oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear cations, [Cr(III)L(ox)(μ-ox)M(II)L'(H(2)O)(2)](+)[M = Co, L = bpy, and L' = Me(2)phen (1); M = Mn and L = L' = phen (2)]. These oxalato-bridged Cr(III)M(II) dinuclear cationic entities of 1 and 2 result from the coordination of a [Cr(III)L(ox)(2)](-) unit through one of its two oxalato groups toward a [M(II)L'(H(2)O)(2)](2+) moiety with either a trans- (M = Co) or a cis-diaqua (M = Mn) configuration. The two distinct Cr(III) ions in 1 and 2 adopt a similar trigonally compressed octahedral geometry, while the high-spin M(II) ions exhibit an axially (M = Co) or trigonally compressed (M = Mn) octahedral geometry in 1 and 2, respectively. Variable temperature (2.0-300 K) magnetic susceptibility and variable-field (0-5.0 T) magnetization measurements for 1 and 2 reveal the presence of weak intramolecular ferromagnetic interactions between the Cr(III) (S(Cr) = 3/2) ion and the high-spin Co(II) (S(Co) = 3/2) or Mn(II) (S(Mn) = 5/2) ions across the oxalato bridge within the Cr(III)M(II) dinuclear cationic entities (M = Co and Mn) [J = +2.2 (1) and +1.2 cm(-1) (2); H = -JS(Cr)·S(M)]. Density functional electronic structure calculations for 1 and 2 support the occurrence of S = 3 Cr(III)Co(II) and S = 4 Cr(III)Mn(II) ground spin states, respectively. A simple molecular orbital analysis of the electron exchange mechanism suggests a subtle competition between individual ferro- and antiferromagnetic contributions through the σ- and/or π-type pathways of the oxalato bridge, mainly involving the d(yz)(Cr)/d(xy)(M), d(xz)(Cr)/d(xy)(M), d(x(2)-y(2))(Cr)/d(xy)(M), d(yz)(Cr)/d(xz)(M), and d(xz)(Cr)/d(yz)(M) pairs of orthogonal magnetic orbitals and the d(x(2)-y(2))(Cr)/d(x(2)-y(2))(M), d(xz)(Cr)/d(xz)(M), and d(yz)(Cr)/d(yz)(M) pairs of nonorthogonal magnetic orbitals, which would be ultimately responsible for the relative magnitude of the overall ferromagnetic coupling in 1 and 2.     

Formation of Pegylated polyurethane and Lysine-coated polyurea nanoparticles obtained from O/W nano-emulsions

The present work describes the formation of Pegylated polyurethane and Lysine-coated polyurea nanoparticles obtained from O/W nano-emulsions via an interfacial polycondensation process in the aqueous solution/polysorbate 80/diisocyanate/medium chain triglyceride systems. The initial nano-emulsions were prepared using the phase inversion composition (PIC) method. Dynamic light scattering studies revealed the changes in the particle size occurring during the process of nanoparticle formation. Well-defined polymeric nanoparticles with a small particle diameter (below 80 nm) and low polydispersity index were obtained using a highly hydrophilic component (polyethylene glycol or lysine) and an aliphatic diisocyante monomer. FT-IR and AFM studies showed that the polymeric matrix of nanoparticles was built by copolymers derived from reaction between the diisocyanate and the hydroxyl groups of both nonionic surfactant and the highly hydrophilic component. Pegylated-polyurethane and lysine-coated polyurea nanoparticles designed in this study are promising tools for future applications in biomedical sciences.     

Highly stereoselective synthesis of tertiary propargylic centers and their isomerization to enantiomerically enriched allenes

Center of attention: A new approach for the synthesis of enantiomerically enriched allenes by isomerization of 2-p-tolylsulfinylphenyl propargylic derivatives is presented, which in turn are prepared by reaction of sulfinylated lithium benzylcarbanions with arylsulfonylacetylenes. The high control of stereoselectivity in both steps is exerted by the sulfinyl group.     

Synthesis of enantiomerically pure anti-1,2-diaryl and syn-1,2-alkylaryl vic-selenoamines

Phenylselenyl benzylcarbanion stabilized by an (S)-2-p-tolylsulfinyl group evolves in a highly stereoselective way in the reactions with (S)-N-(p-tolylsulfinyl)imines at -98 °C affording diastereomerically pure 1,2-selenoamino derivatives in good yields. The syn or anti relationship of the obtained compounds depends on the alkyl or aryl character of the imine. They are easily transformed into enantiomerically pure (1R,2S)-1-aryl[or (1S,2S)-1-alkyl]-2-(phenylseleno)-2-phenylethylamines by reaction with t-BuLi and subsequent methanolysis of the generated sulfinamide derivatives with TFA.     

Membraneless, room-temperature, direct borohydride/cerium fuel cell with power density of over 0.25 W/cm2

The widespread adoption and deployment of fuel cells as an alternative energy technology have been hampered by a number of formidable technical challenges, including the cost and long-term stability of electrocatalyst and membrane materials. We present a microfluidic fuel cell that overcomes many of these obstacles while achieving power densities in excess of 250 mW/cm(2). The poisoning and sluggish reaction rate associated with CO-contaminated H(2) and methanol, respectively, are averted by employing the promising, high-energy density fuel borohydride. The high-overpotential reaction of oxygen gas at the cathode is supplanted by the high-voltage reduction of cerium ammonium nitrate. Expensive, ineffective membrane materials are replaced with laminar flow and a nonselective, porous convection barrier to separate the fuel and oxidant streams. The result is a Nafion-free, room-temperature fuel cell that has the highest power density per unit mass of Pt catalyst employed for a non-H(2) fuel cell, and exceeds the power density of a typical H(2) fuel cell by 50%.