高效毛细管电泳法手性分离D-氨基酸取代胸腺五肽类似物的研究

采用高效毛细管电泳法分离两对D-氨基酸取代的胸腺五肽类似物。对影响分离的缓冲液pH值、电泳温度、电泳电压等进行了系统的研究。用含20mmol/L2,6-二甲基-β-环糊精(DM-β-CD),40mmol/L磷酸盐缓冲液(Ⅰ:pH6.03;Ⅱ:pH5.05)作运行缓冲液,柱温15℃,电压20kV,使样品获得基线分离,取得了满意的分离结果。结果显示,两组样品的D-氨基酸取代物均比L-氨基酸取代物出峰早,提示D-氨基酸取代物的电泳移动速度较快,与DM-β-CD的结合稳定性较L-氨基酸取代物弱。     

Novel optical lithography using silver superlens

This work has demonstrated that with silver superlens,the resolution of conventional optical lithography can be improved significantly.Experimental and simulative results are given to verify the facts that the resolution and the pattern fidelity are sensitive to the contact tightness between layers.     

钛扩散铌酸锂矩形波导中的双折射耦合对传播常数的影响

 从亥姆霍兹方程出发，得到了各向异性光波导在弱导近似下的耦合模理论。耦合系数包括偏振耦合项和双折射耦合项。并用马卡提里近似下的模式作为零级近似。用一级微扰法计算了折射率渐变分布的钛扩散铌酸锂矩形波导的传播常数。在给定参数的情况下，得到双折射项引起的传播常数的改变约为主微扰项的3%，因此双折射耦合对钛扩散铌酸锂矩形波导的性能影响不可忽略，这对设计和分析与它相关的光波导器件具有指导意义。     

急性低氧条件下人脑电图的变化及低氧耐受能力与高山适应能力的关系

本文研究了低压舱急性低氧条件下,人的脑电图变化、低氧耐受能力与高山适应能力之间的关系,并根据18名受试者的测量结果,证明它们之间关系密切。     

载流圆环的张力、自感和线电流模型

分析讨论了一些献在计算载流圆环处于自身磁场受的张力和自感系数时使用线电流模型的不当所带来的发散问题。     

EicC束流冷却方案设计与模拟

对核子内部结构的研究是当前理论和实验研究的重要前沿,高能散射实验是探索核子结构的理想工具。中国科学院近代物理研究所计划在已开建的强流重离子加速器项目(HIAF)的基础上,升级建造中国极化电子离子对撞机(EicC)。EicC将提供质心系能量为15～20 GeV的电子和质子双极化束流,对撞亮度设计指标为2×10³³ cm^-2s^-1,离子束的有效冷却是EicC实现亮度目标的关键。针对离子束流初始发射度大、能量高、流强强的特点,EicC采用两级束流冷却方案,首先在增强器(BRing)中利用常规直流电子冷却器降低离子束流发射度,其次在对撞环(pRing)中采用基于能量回收型直线加速器(ERL)的高能束团冷却系统,抑制对撞过程中的离子束发射度增长。以质子束为例,模拟研究了EicC束流冷却装置中电子束的尺寸、温度、冷却段的磁场和束流光学参数对冷却速率和冷却过程的影响,最终得到了满足亮度要求的束流冷却参数。     

Comparison of helium bubble formation in F82H,ODS, SIMP and T91 steels irradiated by Fe and He ions simultaneously

Ferritic-martensitic steels and ODS steels are attractive candidates for structural materials in advanced nuclear-power systems due to their good swelling resistance. Four kinds of steels, F82 H, 15 Cr-ODS, SIMP and T91, are investigated in this study. We take 6.4 Me V Fe3+ ions and energy-degraded 1.0 Me V He+ ions in the irradiation of these materials to 5 dpa and 60 appm He/dpa, 200 appm He/dpa and 600 appm He/dpa at 300℃ and 450℃, respectively. The bubble formation and distribution are investigated by transmission electron microscopy(TEM). Formation and distribution of the bubbles in the four investigated steels are compared. The influence of irradiation temperature and helium injection ratio on bubble formation is discussed. It is found that there appears to be homogenously distributed bubbles at 300℃ irradiation while heterogeneously distributed bubbles at 450℃ irradiation.     

基于视觉的传感器位置记忆追踪方法

在采用某些特殊传感器测量参数时,需要在传感器移除后确定出原来的测量位置,比如采用穴位传感器测量出患者多个经络穴位的异常表现后,需要确定出异常穴位的实际位置,对其施加干预措施,缓解患者疼痛并改善身体状况。为此,研究了传感器的记忆追踪问题,提出了一种基于视觉的传感器位置记忆追踪方法,在传感器和被测对象上分别粘贴AprilTag,在测量过程中,采用AprilTag检测算法计算出传感器与被测对象之间的位置关系;在传感器移除后,利用这种位置关系和被测对象上的AprilTag追踪到传感器的测量位置,追踪精度达1 mm以内,为进一步处置提供参考。     

夹心法免疫层析试条的数学模型与仿真研究

基于夹心法免疫层析试条检测原理,结合对流扩散方程和流体动力学方程,建立了夹心法免疫层析试条动态反应过程的数学模型,并通过COMSOL软件对试条动态反应过程进行仿真.分别探究了目标待测物A浓度在0 ～ 20 mol/L,标记物P浓度在1×10-2～1×103 mol/L以及硝酸纤维素膜的孔隙率在0～1范围内变化时,检测线上夹心复合物浓度关于位置和时间的浓度变化情况,并分析了各物质初始浓度以及试条结构对于检测结果和检测时间的影响.结果表明,在一定浓度范围内,目标待测物A以及标记物P浓度的增加将提高试条的定量检测性能,而孔隙率通过影响混合液流速和混合液中各物质反应接触情况来影响检测结果.     

Ionic conductivity study on electron beam irradiated polyacrylonitrile-polyethylene oxide gel

Different mass percent polyacrylonitrile (PAN)-polyethylene oxide (PEO) gels were prepared and irradiated by an electron beam (EB) with energy of 1.0 MeV to the dose ranging from 13 kGy to 260 kGy.The gels were analysed by using Fourier transform infrared spectrum,gel fraction and ionic conductivity (IC) measurement.The results show that the gel is crosslinked by EB irradiation,the crosslinking degree rises with the increasing EB irradiation dose (ID) and the mass percents of both PAN and PEO contribute a lot to the crosslinking;in addition,EB irradiation can promote the IC of PAN-PEO gels.There exists an optimum irradiation dose,at which the IC can increase dramatically.The IC changes of the PAN-PEO gels along with ID are divided into three regions:IC rapidly increasing region,IC decreasing region and IC balanced region.The cause of the change can be ascribed to two aspects,gel capturing electron degree and crosslinking degree.By comparing the IC-ID curves of different mass percents of PAN and PEO in gel,we found that PAN plays a more important role for gel IC promotion than PEO,since addition of PAN in gel causes the IC-ID curve sharper,while addition of PEO in gel causes the curve milder.