聚芳香炔铂太阳能电池的制备与性能

设计合成了2种聚芳香炔铂共轭高分子给体(聚合物1, 3)和一种芳香炔铂共轭高分子受体(聚合物2), 并对其光物理特性进行了研究. 聚合物3被激发后, 与聚合物2之间既可以发生激发单重态-单重态的电子转移, 也可以发生激发三重态-三重态的电子转移. 分别对聚芳香炔铂共轭高分子给体和芳香炔铂共轭高分子受体组成的太阳能电池的特性进行了研究. 其弱的光伏特性归因于明显的激发单重态-单重态电子转移过程及此类高分子较低的导电特性. 电致发光实验结果表明, 聚合物3的阳离子自由基主要由其激发三重态决定.     

Marcinkiewicz积分交换子的有界性

本文考虑了Marcinkiewicz积分交换子μΩb在Lp(Rn)和Hardy空间的有界性, 其中Ω∈L1(Sn-1)是Rn中的零次齐次函数且满足一类Lq-Dini条件,因此改进了以往的结果．     

Quantum Theory of Electronic Double-Slit Diffraction

Phenomena of electron, neutron, atomic and molecular diffraction have been studied in many experiments, and these experiments have been explained by some theoretical works. We study electronic double-slit diffraction with a quantum mechanical approach and obtain the following results： （1） When the ratio of d ＋ a /a=n （n = 1,2, 3,...）, orders n, 2n, 3n,... are missing in diffraction pattern. （2） When the ratio of d＋a/a≠ n （n =1,2, 3,...）, there is a not missing order in diffraction pattern. （3） The slit thickness c has a large affect on the electronic diffraction pattern, which is a new quantum effect. We believe that all the predictions in our work can be tested by the electronic double slit diffraction experiment.     

壳聚糖-明胶共混膜

用溶液共混法成功地制备了壳聚糖与明胶共混膜,并用红外光谱, Ｘ 射线衍射,扫描电镜,透光率,吸水率及力学性能测试对共混膜进行了表征结果表明,共混膜中壳聚糖分子与明胶分子间存在强的相互作用及良好的相容性,壳聚糖的引入有利于减小明胶的吸水率,改善其力学性能     

BEPCⅡ储存环束团流强测量

针对北京正负电子对撞机二期工程(BEPCⅡ)原束团流强测量系统(BCM)不能稳定运行的问题,对系统进行了升级。利用高速ADC对束流位置探头(BPM)信号直接采样,在现场可编程门阵列(FPGA)内进行实时数字信号处理,进而得到加速器储存环内的束团流强值。基于反射内存网络,系统可以实现测量结果高速共享、实时显示。升级后系统实现了更高精度的测量,实时显示精度到0.1mA,最佳测量精度达到10μA。通过对系统的触发时钟和算法结构调整,系统实现了长时间的稳定工作,正负电子储存环均实现了对束团流强的均匀性控制,提高了加速器的对撞亮度。     

二项式系数倒数级数恒等式

利用已知级数,通过裂项构造出一批新的二项式系数倒数级数,它们的分母分别含有1到4个奇因子与二项式系数的乘积表达式.所给出二项式系数倒数级数的和式是封闭形的.     

Design of BEPCⅡ bunch current monitor system

BEPCⅡ is an electron-positron collider designed to run under multi-bunches and high beam current condition. The accelerator consists of an electron ring, a positron ring and a linear injector. In order to achieve the target luminosity and implement the equal bunch charge injection, the Bunch Current Monitor (BCM) system is built on BEPCⅡ. The BCM system consists of three parts: the front-end circuit, the bunch current acquisition system and the bucket selection system. The control software of BCM is based on VxWorks and EPICS. With the help of BCM system, the bunch current in each bucket can be monitored in the Central Control Room. The BEPCⅡ timing system can also use the bunch current database to decide which bucket needs to refill to implement ``top-off' njection.     

Preliminary study of residual orbit oscillation in BEPCⅡ

BEPCII has two rings each with an injection system. The injection system of each ring consists of two kicker magnets and a septum magnet. The injection layout of two rings is the same. Both two kickers would kick the beam in horizontal plane. The betatron phase advance in the horizontal plane between two kickers is designed exactly 180° in order to reduce the perturbation to the circulating beams during injection. In fact, the residual orbit oscillation will originate because of the existence of a variety of errors. The Librea Electron BPM processor is used to acquire the beam position data in turn-by-turn mode and to analyze the residual orbit oscillation. According to the measurement results, minimization of the residual orbit oscillation can be done by adjusting the peak field strength and trigger timing delay of two kickers. With very small residual orbit oscillation the two beams can keep collision condition during the injection.     

合肥光源逐束团横向反馈系统

 介绍了在合肥光源研制的一套横向(x, y方向)高频、宽带逐束团测量和反馈系统,以及抑制耦合束团不稳定性的初步实验。其中重点介绍了在该系统研制过程中所涉及的部分关键技术：矢量运算模块的开发使得反馈系统的调试简易方便;Notch滤波器用于滤除反馈信号中的直流分量以及回旋频率分量,节省反馈功率;激励条带的研制。初步的反馈实验结果表明：反馈系统开启后不稳定性振荡得到抑制。