对碘酚对鲁米诺化学发光增强的试验研究

本文报道了由过氧化物酶催化鲁米诺与过氧化氢发光反应的增强发光研究。合成了增强剂对碘酚,并用对碘酚对鲁米诺与过氧化氢发光反应的光增强作用进行了试验,已经证实增强发光反应可将过氧化物酶的最低检测浓度降低到10-12～10-13mol/L水平。     

用偏振烧孔实现的室温双波长光纤激光器

本文提出一种简单的掺铒光纤激光器的结构,在室温下实现了稳定的双波长激光运转.在该结构中,使用刻写在保偏光纤上的光纤布喇格光栅作为波长选择器件. 实验表明,通过调整偏振控制器的状态,在室温下能够得到稳定的双波长激光输出,波长间隔0.52 nm,16次重复扫描对应于每一波长的振幅变化及波长间振幅差异均小于0.2 dB.     

A Transfer Matrix-Based Analysis of Vertical-Cavity Semiconductor Optical Amplifiers

Based on the transfer matrix method, we present a new one-dimensional steady-state model of vertical-cavity semiconductor optical amplifiers （VCSOAs）, in which the longitudinal carrier concentration distribution in the active region and the discontinuity of the refractive index inside the cavity is taken into consideration. The model is theoretically proven to be a reliable one for describing the standing wave effect in a periodic gain structure. By using this model, some optical amplification characteristics of VCSOAs are investigated.     

数字式超声内窥成像系统

介绍了一种采用前置微型电机的新型推拉式超声内窥镜的研制方法.在该内镜系统中,采用FPGA实现成像处理功能,运用编码激励技术以提高系统的信噪比和探测深度,使用了微型前置探头取代了目前商用超声内镜中所采用的钢丝连接以驱动换能器进行旋转扫描.该仪器在300 h的连续工作测试中能够正常运行.相较模拟成像系统,数字系统将模数转换置于信号处理的最前端,从而能够保留回声的更多信息.这使得编码激励、数字式正交解调系统获得更高的成像质量.将电机前置于探头附近,能够较外部导线牵引旋转方式获得更大的旋转稳定性、更高的超声图像质量和更长的使用寿命.     

Microwave left-handed composite material made of slim ferrite rods and metallic wires

This paper reports on experimental study of the microwave properties of a composite material consisting of ferrite and copper wires. It finds that the slim ferrite rods can modify the magnetic field distribution through their anisotropy, so that the ferrite's negative influence on the copper wires' plasma will be reduced. Left-handed properties are observed even in the specimen with close stuck ferrite rods and copper wires.     

Raman Spectrum Analysis on the Solid-Liquid Boundary Layer of BGO Crystal Growth

We study the Raman spectra of Bi4GeO12 crystal at different temperatures, as well as its melt. The structure characters of the single crystal, melt and growth solid-liquid boundary layer of BGO are investigated by their high-temperature Raman spectra for the first time. The rule of structure change of BGO crystal with increasing temperature is analysed. The results show that there exists [GeO4] polyhedral structure and Bi ion independently in BGO melt. The bridge bonds Bi-O-Bi and Bi-O-Ge appear in the crystal and at the boundary layer, but disappear in the melt. The structure of the growth solid-liquid boundary layer is similar to that of BGO crystal. In the melt, the long-range order structure of the crystal disappears. The thickness of the growth solid-liquid boundary layer of BGO crystal is about 50 μm.     

Tl_4Ba_3Ca_3Cu_4O_y系统的超导电性和磁化反常

Tl_4Ba_3Ca_3Cu_4O_y 氧化物超导体中存在100K 和120K 两个超导相.测量电流为10mA 时,零电阻超导 T_c 为119K.DC 磁化结果表明:在77K 时不可逆场约为2200O_e,冻结磁通密度11.6G,样品是弱钉扎Ⅱ类超导体.Meissner 效应测量结果表明:Meissner 信号的61%是120K 相的贡献,39%是100K 相的贡献.超导体积的上限和下限的比较,不同磁场和测量电流的 R(T)超导转变以及磁化反常表明:我们的样品中存在着大量的弱连接超导电性,并构成邻近效应超导体,研究了它的日 H_(c2)(T).并由邻近效应超导体的磁化曲线演算出它的超导参量.     

电激励O2（a1Δg）发生器的实验研究

 在纯氧，及氧气和氩气的混合气体情况下，对射频放电产生O₂（a¹Δg）进行了实验研究。射频频率为13.56MHz，额定功率500W，放电压力133.0~399.0Pa， 氧气流量最大为1.4mmol/s， 氩气流量为2.1mmol/s。研究了O₂（a¹Δg）产率随气体流量、放电气压以及混合气体放电条件的变化。O₂（a¹Δg）产率最大值约为17.5%。     

光学镜面复制技术的研究

光学镜面复制技术包括镀膜、胶合、脱模等工艺 ,这是一种通过压模的方法生产光学镜面的技术。一个镀好膜的高精度母模的光学面被复制到没有抛光过的复制件非光学表面上 ,母模和复制件之间的面形误差由胶粘剂补偿 ,通过脱模 ,可以得到一个镀好膜的由基体和胶粘剂组成的复制光学面。探讨了光学镜面复制技术的工艺方法 ,给出了所复制的球面、非球面、二次复制平面的干涉图和阴影图。