Determination of cadmium,aluminium, and copper in beer and products used in its manufacture by electrothermal atomic absorption spectrometry

Procedures were developed for determining cadmium, aluminium, and copper in beer and the products used in its manufacture by electrothermal atomic absorption spectrometry. Beer samples were injected into the furnace and solid samples were introduced as suspensions after preparation in a medium containing hydrogen peroxide, nitric acid, and ammonium dihydrogen phosphate for cadmium atomization. Calibration was performed with aqueous standards, and characteristic masses and detection limits were, respectively, 1 and 0.3 pg for cadmium, 18 and 5.4 pg for aluminium, and 5.6 and 6.8 pg for copper. Different samples of beer, wort, brewer's yeast, malt, raw grain, and hops were analyzed by the proposed procedures. Cadmium was found in low concentrations (0.001-0.08 microg/g and 0-1.3 ng/mL); copper (3-13 microg/g and 25-137 ng/mL) and aluminium (0.6-9 microg/g and 0.1-2 microg/mL) were found at higher levels. The reliability of the procedure was confirmed by comparing the results obtained with others based on microwave oven sample digestion, and by analyzing several certified reference materials.     

Terbium-sensitized luminescence determination of levofloxacin in tablets and human urine and serum

A selective and sensitive luminescence method for the determination of levofloxacin is described. The method is based in the luminescence signal from a terbium(III)-levofloxacin complex, in a micellar solution of sodium dodecyl sulfate (SDS), using a chemical deoxygenation agent (Na2SO3). The method allows the determination of 8-600 ng mL-1 of levofloxacin in 10 mM SDS solution containing 0.04 M acetic acid-sodium acetate buffer (pH 6) and 7.5 mM Na2SO3 with lambda exc = 292 nm and lambda em = 546 nm. The luminescence method was applied to the determination of the levofloxacin in a Spanish commercialized pharmaceutical formulation Tavanic (Hoechst Marion Roussel). Good concordance was found between the nominal and experimental values (500 and 488 mg, respectively), with a relative standard deviation (RSD) of 0.6%. The proposed method was shown to be 100-fold more sensitive than the spectrophotometric method, and nearly 2-fold more sensitive than the fluorescence method. The method was also applied to levofloxacin determination in human serum (by external calibration method) and urine (by standard additions method), spiked at levels found after drug administration at normal clinical doses. Average recoveries found were 90.1 (RSD 1%) and 102 (RSD 1.9%), respectively.     

Two New Antiferromagnetic Nickel(II) Complexes Bridged by Azido Ligands in the Cis Position. Effect of the Counteranion on the Crystal Structure and Magnetic Properties

Two new nickel(II) end-to-end azido-bridged compounds, cis-catena-[NiL(2)(&mgr;-N(3))](n)()(ClO(4))(n)().nH(2)O (1) and [Ni(2)L(4)(&mgr;-N(3))(2)](PF(6))(2) (2), were synthesized and characterized; L is 2-(aminoethyl)pyridine. The crystal structures of 1 and 2 were solved. Complex 1: monoclinic system, space group P2(1)/a, a = 8.637(2) ?, b = 18.9995(7) ?, c = 12.3093(7) ?, beta = 105.92(2) degrees, Z = 4. Complex 2: triclinic system, space group P&onemacr;, a = 9.139(7) ?, b = 10.124(3) ?, c = 12.024(2) ?, alpha = 70.407(14) degrees, beta = 84.19(2) degrees, gamma = 67.67(4) degrees, Z = 1. In the two complexes the nickel atom is situated in a similarly distorted octahedral environment. The two complexes are different; 1 is a one-dimensional helicoidal complex with the two L ligands and the two end-to-end azido bridges in a cis arrangement while complex 2 is a dinuclear system with two end-to-end azido bridges, indicating the extreme importance of the counteranion present (ClO(4)(-) for 1 and PF(6)(-) for 2). The magnetic properties of the two compounds were studied by susceptibility measurements vs temperature. The chi(M) vs T plot for 1 shows the shape for a weakly antiferromagnetically coupled nickel(II) one-dimensional complex without a maximum until 4 K. In contrast, for complex 2 the shape of the chi(M) vs T curve shows a maximum near 40 K, indicating medium antiferromagnetic coupling. From the spin Hamiltonian -J(ij)()S(i)()S(j)(), J values for 1 and 2 were less than -1 and -29.1 cm(-)(1), respectively. The magnetic behavior for 1 and 2 may be explained in terms of the overlap between magnetic orbitals, taking into account the torsion of the Ni(II) atoms and azido-bridging ligands in the two structures.     

Synthesis and characterization of trifluoromethyl fluoroformyl peroxycarbonate,CF3OC(O)OOC(O)F

The synthesis of CF(3)OC(O)OOC(O)F is accomplished by the photolysis of a mixture of (CF(3)CO)(2)O, FC(O)C(O)F, CO, and O(2) at -15 degrees C using a low-pressure mercury lamp. The new peroxide is obtained in pure form in low yield after repeated trap-to-trap condensation and is characterized by NMR, IR, Raman, and UV spectroscopy. Geometrical parameters were studied by ab initio methods [B3LYP/6-311+G(d)]. At room temperature, CF(3)OC(O)OOC(O)F is stable for many days in the liquid or gaseous state. The melting point is -87 degrees C, and the boiling point is extrapolated to 45 degrees C from the vapor pressure curve log p = 8.384 - 1715/T (p/mbar, T/K). A possible mechanism for the formation of CF(3)OC(O)OOC(O)F is discussed, and its properties are compared with those of related compounds.     

Trifluoromethoxycarbonyl peroxynitrate, CF3OCOOONO2

The trioxide, CF(3)OC(O)OOOC(O)OCF(3), reacts with NO(2) at 0 degrees C to yield the new peroxynitrate, CF(3)OC(O)OONO(2), which is stable for hours at room temperature. It is spectroscopically characterized and some thermal properties are reported. From the vapor pressure, ln(p/p(0)) = 14.06 - 4565/T, of the liquid above the melting point of -89 degrees C, the extrapolated boiling point is 52 degrees C. CF(3)OC(O)OONO(2) dissociates at higher temperatures and low pressures into the radicals CF(3)OC(O)OO and NO(2) as demonstrated by matrix isolation experiments. The matrix-isolated peroxy radicals consist in a rotameric mixture of trans,trans,trans-CF(3)OC(O)OO and trans,trans,cis-CF(3)OC(O)OO, where trans and cis denote dihedral angles of ca. 180 degrees and 0 degree, respectively, around beta F-C-O-C, beta C-O-C-O, and beta O-C-O-O, with an equilibrium composition dependent on the thermolysis temperature. The radical trans,trans,cis-CF(3)OC(O)OO is found to be ca. 3 kJ mol(-1) higher in enthalpy than trans,trans,trans-CF(3)OC(O)OO. DFT calculations are performed to support the vibrational assignments and to provide structural information about CF(3)OC(O)OONO(2).     

Group 6 heteroatom- and non-heteroatom-stabilized carbene complexes. beta,beta'- and alpha,beta,beta'-annulation reactions of cyclic enamines

Cyclization reactions of group 6 Fischer carbene complexes with cyclopentanone and cyclohexanone enamines are described. Enamine 3a undergoes thermal alpha,beta,beta'-annulation with alkenylcarbene complexes 1 and 2 (THF, 60 degrees C), affording semibullvalenes 5. The metalate intermediates 6, resulting from beta,beta'-annulation of the enamines 3a and 4a, were quantitatively formed by running the reaction in hexane at room temperature. Acid-promoted demetalation of 6 afforded endo-2-bicyclo[3.2.1]octen-8-ones 7 and endo/exo-2-bicyclo[3.3.1]nonen-9-ones 8 (endo/exo = 5:1). Using (S)-methoxymethylpyrrolidine-derived enamines 3b and 4b,c allowed highly enantioenriched cycloadducts endo-(+)-7 as well as endo-(-)-8 and exo-(-)-8 to be accessed. The non-heteroatom-stabilized carbene complex 10 was formed from complex 6 by Me(3)SiOTf-promoted elimination of the methoxy group, characterized by (13)C NMR, and transformed into the organic compounds 7, 7-d, and 11 as well as into bicyclo[3.2.1]octan-2,8-diones 14 and cycloheptanones 15. On the basis of this sequence, enantioenriched cycloheptanones (+)-15 were efficiently prepared in one pot from carbene complexes 2 and enamine 3b (51-55% yield, 91-96% ee). Extension of this work to simple Fischer carbene complexes 16 allowed an appropriate way to generate the nonstabilized pentacarbonyl[(phenyl(alkyl)carbene]tungsten complex 17 to be designed, for which the thermal and chemical behavior leading to compounds 18-21 is described.     

Generation of new landomycins by combinatorial biosynthetic manipulation of the LndGT4 gene of the landomycin E cluster in S. globisporus

A 3 kb DNA fragment from the Streptomyces globisporus 1912 landomycin E (LaE) biosynthetic gene cluster (lnd) was completely sequenced. Three open reading frames were identified, lndGT4, lndZ4, and lndZ5, whose probable translation products resemble a glycosyltransferase, a reductase, and a hydroxylase, respectively. Studies of generated mutants from disruption and complementation experiments involving the lndGT4 gene allowed us to determine that LndGT4 controls the terminal L-rhodinose sugar attachment during LaE biosynthesis and that LndZ4/LndZ5 are responsible for the unique C11-hydroxylation of the landomycins. Generation of the novel landomycins F, G, and H in the course of these studies provided evidence for the flexibility of lnd glycosyltransferases toward their acceptor substrates and a basis for initial structure-activity relationships within the landomycin family of antibiotics.     

The first immobilization of pyridine-bis(oxazoline) chiral ligands

[formula: see text] A chiral pyridine-bis(oxazoline) ligand, functionalized with a vinyl group in the pyridine ring, can be polymerized with styrene and divinylbenzene to obtain supported chiral ligands. As proof of the usefulness of this supported ligands, the corresponding ruthenium complexes are catalysts for the cyclopropanation reaction of styrene with ethyl diazoacetate with up to 85% ee.