Modulation of absorption manner in helicon discharges by changing profile of low axial magnetic field

The modulation of absorption manner in helicon discharge by changing the profile of low axial magnetic field is explored experimentally in this work. The experiments are carried out in Boswell-type antenna driven by 13.56-MHz power source in 0.35-Pa argon environment. The peak of the external non-uniform magnetic field(B_(ex)) along the axis is observed in a range from 0 Gs to 250 Gs(1 Gs = 10~(-4) T), where the electron density varies from 0.5×10~(16) m~(-3) to 9×10~(16) m~(-3).When Bex is located near the tube upper end sealed by a dielectric plate, or near the tube bottom end connected with a diffusion chamber, the plasmas are centralized in the tube in the former case while the strong luminance appears between the edge of the tube and the axial line in the latter case. When Bex is located in the middle of the antenna, moreover, an effective resistance(R_(eff)) peak appears apparently with increasing magnetic field. The glow moves toward first the edge of the tube and then the two antenna legs as the magnetic field increases. The discharge in this case is caused by the absorption of Trivelpiece–Gould(TG) wave. It is suggested that B_(ex) is located in the middle of the antenna to obtain a higher efficiency of power transfer.     

深紫外激光光发射与热发射电子显微镜在热扩散阴极研究中的应用

对热扩散阴极表面微区发射状态进行原位观察和分析一直是热阴极研究的重要课题.本文着重介绍深紫外激光光发射电子/热发射电子显微镜的基本原理及其在热扩散阴极研究中的典型实例.系统配备了高温激活所用的加热装置,样品可被加热至1400℃.系统具有光发射电子、阴极热发射电子、光发射电子和阴极热发射电子联合三种电子成像模式.应用表明,对于热扩散阴极而言,深紫外激光光发射电子像适于呈现阴极表面的微观结构形貌;热发射电子像适于反映阴极表面的本征热电子发射及均匀性;光电子和热电子联合成像适于对阴极表面的有效发射点做出精确定位.     

A novel low-loss four-bit bandpass filter using RF MEMS switches

This paper details the design and simulation of a novel low-loss four-bit reconfigurable bandpass filter that integrates microelectromechanical system(MEMS)switches and comb resonators.A T-shaped reconfigurable resonator is reconfigured in a'one resonator,multiple MEMS switches'configuration and used to gate the load capacitances of comb resonators so that a multiple-frequency filtering function is realized within the 7-16 GHz frequency range.In addition,the insertion loss of the filter is less than 1.99 dB,the out-of-band rejection is more than 18.30 dB,and the group delay is less than 0.25 ns.On the other hand,the size of this novel filter is only 4.4 mm×2.5 mm×0.4 mm.Our results indicate that this MEMS reconfigurable filter,which can switch 16 central frequency bands through eight switches,achieves a low insertion loss compared to those of traditional MEMS filters.In addition,the advantages of small size are obtained while achieving high integration.     

Fabrication and investigation of ferroelectric memristors with various synaptic plasticities

In the post-Moore era, neuromorphic computing has been mainly focused on breaking the von Neumann bottlenecks. Memristors have been proposed as a key part of neuromorphic computing architectures, and can be used to emulate the synaptic plasticities of the human brain. Ferroelectric memristors represent a breakthrough for memristive devices on account of their reliable nonvolatile storage, low write/read latency and tunable conductive states. However, among the reported ferroelectric memristors, the mechanisms of resistive switching are still under debate. In addition, there needs to be more research on emulation of the brain synapses using ferroelectric memristors. Herein, Cu/PbZr_0.52Ti_0.48O₃ (PZT)/Pt ferroelectric memristors have been fabricated. The devices are able to realize the transformation from threshold switching behavior to resistive switching behavior. The synaptic plasticities, including excitatory post-synaptic current, paired-pulse facilitation, paired-pulse depression and spike time-dependent plasticity, have been mimicked by the PZT devices. Furthermore, the mechanisms of PZT devices have been investigated by first-principles calculations based on the interface barrier and conductive filament models. This work may contribute to the application of ferroelectric memristors in neuromorphic computing systems.     

基于微孔板化学发光法检测碱性磷酸酶的研究

CDP-Star能被ALP迅速水解,且水解产物能够持续发光.本研究对化学发光法检测ALP的反应条件进行了优化.优化后的反应条件为:125 μtmol/L的CDP- Star在pH 9.5缓冲液中,37℃下与ALP反应10min.在此条件下,△RLU与ALP的活力呈线性关系.因此,建立了一种基于微孔板化学发光法检测ALP的实验方法.结果表明,本方法检测ALP的检测线性范围是0.05～10 U/L和10～1000 U/L,相对于光吸收法具有速度快、灵敏度高、重复性好等优点.因此,本方法可以被开发成试剂盒,应用于高通量全自动生化分析仪的测试分析.     

专家-新手教师化学课堂教学对话特征的比较研究

采用专家-新手比较研究方法,对专家教师和新手教师化学课堂教学对话的内容和方式进行了比较。结果表明,专家教师的课堂对话属于“以问题为中心的互动式对话”,具体特征表现为“教师提问-学生陈述-师生质疑-共同评价”;而新手教师的课堂对话属于“以教师为中心的问答式对话”,具体特征表现为“教师提问-学生回答-教师评价”。     

多晶纯钛在高应变率不同温度下的拉伸力学行为实验研究

利用MTS809和自行研制的旋转盘冲击拉伸试验机,对多晶纯钛进行了应变率为0.001s-1和300s-1、温度为298K至973K的拉伸试验和应变率为300 s-1不同温度下的冲击拉伸复元试验,得到了多晶纯钛的拉伸应力应变曲线和高应变率等温应力应变曲线。试验结果表明,多晶纯钛的拉伸力学行为具有应变率和温度相关性。采用修正的Johnson-Cook模型进行数值拟合,结果表明,该本构模型能较好地表征多晶纯钛在试验应变率和温度范围内的拉伸力学行为。     

单轴旋转对惯导系统误差特性的影响

分析了单轴旋转惯导系统自动补偿的基本原理,对陀螺和加速度计常值漂移、安装误差、标度因数误差等因素在单轴旋转下的调制情况进行了研究。通过仿真分析了转动速度对各种误差的影响规律,指出了实际系统旋转速度和方式的选择要综合考虑陀螺的常值漂移和标度因数误差的影响。利用激光捷联惯导系统在实验室中进行了单轴旋转IMU实验,其定位精度优于1nm／24h。研究结果可以为单轴旋转惯导系统的进一步优化和工程设计提供理论参考。     

二甲基甲酰胺中电沉积制备钐钴合金

稀土;恒电位电沉积;柠檬酸;二甲基甲酰胺中电沉积制备钐钴合金     

改性纳米羟基磷灰石/PLGA复合材料的制备及生物活性

以低聚乳酸接枝改性的羟基磷灰石纳米粒子(op-HA)和聚丙交酯-乙交酯(PLGA)制备的生物可降解纳米复合材料(op-HA/PLGA)为研究对象, 采用FTIR, TGA, ESEM和EDX分析其接枝反应、接枝率、表面形貌和钙磷沉积情况, 通过在材料膜表面接种兔成骨细胞进行体外培养, 采用荧光染色、NIH Image J图像分析和Real-time PCR综合评价细胞在材料表面的形态、黏附面积比、增殖能力和基因表达水平, 以此评价新型骨修复纳米复合材料op-HA/PLGA的表面性质和生物活性. 研究结果表明, op-HA的表面接枝率为8.3%, 掺入至PLGA后可形成富含钙磷的粗糙表面, 促进成骨细胞的黏附、扩展和增殖, 提高Ⅰ型胶原蛋白(Collagen-Ⅰ)、骨形态蛋白-2(BMP-2)和骨连接蛋白(Osteonectin)的基因表达水平, 提高材料的钙磷沉积能力. op-HA/PLGA具有良好的细胞相容性和成骨活性.