New progress on beam availability and reliability of PKU high intensity CW proton ECR ion source

The stability and reliability of an ion source and its beam availability are extremely significant for any accelerator,especially for those high current long term CW operation ones like ADS. Although the first high quality 306-hours continuous wave(CW) operating curve at 50 m A@35 ke V has been successfully obtained with a standard compact 2.45 GHz ECR ion source at Peking University(PKU), but the uncertainties that caused beam trips before are unacceptable during an accelerator real operation and should be eliminated. Meanwhile, no permission will be given when the beam power is upgraded from 50 m A@35 ke V to 50 m A@50 ke V. To improve the PKU CW proton source quality, several upgrades were done recently. After those improvements, a new long term CW proton beam experiment at 50 m A@50 ke V was carried out in June 2016. The total running time is 300.5 hours, including near 6 hours ion source preparation and 294 hours non-disturb continuous operation. Within the continuous 13 days operation, no beam-off happened, no spark was observed,no beam drop appeared, no interrupting action was needed, and only a few beam fluctuations caused by the air conditional failure occurred. Beam availability and reliability within the 294 hours is 100%. The root-mean-square(RMS) emittance of this 50 m A@50 ke V CW proton beam is about 0.186 π.mm.mrad. A careful inspection of the ion source was done after this long term operation and no obvious damage was found. The restart experimental results obtained after the ion source inspection prove the high repeatability of PKU PMECRIS. In addition, a 130-m A H+beam was obtained at 50 k V with duty factor of 10%(100 Hz/1 ms) with this source. Details will be presented in this paper.     

光学超振荡与超振荡光学器件

传统光学器件的衍射极限极大地制约了远场超分辨光学系统的进一步发展.如何从光学器件层面突破光学衍射极限瓶颈,实现非标记远场超分辨光学成像,是光学领域面临的巨大挑战.光学超振荡在不依靠倏逝波的条件下,可以在远场实现任意小的亚波长光场结构,这为突破光学衍射极限提供了一条崭新的途径.近年来,光学超振荡现象和超振荡光学器件的相关研究得到了快速发展,在理论和实验上成功地演示了超振荡光场的产生和多种超振荡光学器件,并在实验上展示了超振荡光学器件在非标记远场超分辨光学显微、成像以及超高密度数据存储等应用领域的巨大优势和应用潜力.本文对光学超振荡相关理论、超振荡光学器件设计理论和方法、超振荡光学器件发展现状、超振荡光场测试方法以及超振荡光学器件的应用等方面进行详细介绍和分析.     

基于一代像增强器的高分辨率X射线相机

为了实现在较低剂量下获得较高的分辨率,研制了一款价格低廉的X射线CCD相机。该相机使用硫氧化钆作为转换屏、经一代像增强器增强后的图像通过光锥耦合到CCD相机上;为了提高系统的光传输效率,提出了将像增强器输出直面板或倒像器直接更换成光锥,其小端直接同CCD相机耦合的方案;通过灰度分析计算对比度曲线,拟合得出系统的本征空间分辨率为13 Lp/mm;通过拍摄实际景物,可以清晰地看到其内部的细节,显示出比较好的图像质量。     

2-巯基-5-甲基苯并咪唑振动光谱的密度泛函理论研究

本文选用密度泛函理论中的B3LYP杂化泛函,在B3LYP/6-311++G(d, p)水平下,优化了2-巯基-5-甲基苯并咪唑分子(MMBI)的结构,优化结果表明,2-巯基-5-甲苯并咪唑分子是一个近平面结构.通过频率计算,获得了2-巯基-5-甲基苯并咪唑分子(MMBI)的拉曼光谱,并和实验获得的拉曼光谱图进行了对比,实验和理论计算获得的拉曼光谱图基本上是一致的,表明本文选取的DFT理论计算方法是可靠的.结合VEDA4软件对2-巯基-5-甲基苯并咪唑分子的拉曼谱带简正振动模式进行了指认.此外,分析并讨论了2-巯基-5-甲基苯并咪唑分子(MMBI)前线轨道,HOMO和LUMO轨道能级差为4.51 eV,电子有从HOMO跃迁到LUMO的趋势.采用含时密度泛函理论(time dependent density functional theory, TDDFT)对2-巯基-5-甲基苯并咪唑分子(MMBI)的激发态进行了计算分析,计算结果表明乙醇溶剂中2-巯基-5-甲基苯并咪唑分子(MMBI)理论计算的吸收波长为226 nm, 288 nm.对研究2-巯基-5-甲基苯并咪唑分子的性质,提供了理论...     

刺激响应型AIE水凝胶研究进展

刺激响应水凝胶可以对环境的微小变化产生较大的物理化学变化,在药物传递、生物分离、生物传感器和组织工程等领域具有广泛的应用。但受聚集导致荧光猝灭(ACQ)效应的影响,其在发光相关领域的应用受到限制,聚集诱导发光(AIE)概念的提出解决了这一难题。将AIE分子引入水凝胶体系,获得刺激响应型AIE水凝胶,在生物医学、信息防伪、3D水凝胶驱动器以及软体机器人的开发等多个高科技领域崭露头角。本文将近年来报道的刺激响应型AIE水凝胶按刺激因素分为物理因素(温度和光)、化学因素(pH、溶剂和离子)和生物因素(酶)三大类,分别阐述了水凝胶的制备、响应机理及潜在应用,并针对刺激响应型AIE水凝胶面临的问题和挑战进行了展望。     

在离子液体中合成有机磷农药通用半抗原

以离子液体[Bmim] Br为溶剂和催化剂,O,O-二烷基二硫代磷酸铵盐(1a,1b)与氯乙酸于45℃反应40min,合成了有机磷农药半抗原S-羧甲基-O,O-二乙基二硫代磷酸酯和S-羧甲基-O,O-二甲基二硫代磷酸酯,产率分别为97.9％和98.4％.1a和1b低温(＜5℃)酸化后与丙烯酸在[Bmim] Br中于室温反应60 min,合成了两个有机磷农药半抗原S-羧乙基-O,O-二乙基二硫代磷酸酯和S-羧乙基-O,O-二甲基二硫代磷酸酯,产率分别为93.7％和94.2％.[Bmim] Br重复使用4次后依然保持较高的催化活性.     

流动注射-化学发光法测定富马酸依美斯汀

在酸性条件下,KMnO4与甲醛能够产生微弱的化学发光,而富马酸依美斯汀的存在能够大大增强该化学发光强度;结合流动注射技术,建立了测定富马酸依美斯汀的流动注射-化学发光新方法。该方法的线性范围分别为3.0×10-8～2.0×10-7g/mL,2.0×10-7～1.0×10-6g/mL和1.0×10-6～8.0×10-6g/mL。检出限为1.0×10-8g/mL,对2.0×10-6g/mL富马酸依美斯汀滴眼液平行测定11次,其相对标准偏差为1.3%。该方法已成功应用于滴眼液中富马酸依美斯汀的含量测定。     

非对称损失函数下Burr Ⅻ型分布可靠性指标的Bayes估计

本文研究了R=P(Y＜X)在两种非对称损失函数下的Bayes估计问题,其中随机变量X和Y相互独立且服从不同的Burr XII型分布.利用Lindley近似方法,获得了Bayes估计的显式近似表达式,通过随机模拟比较了不同损失函数下的Bayes估计的性质.     

微重力下低温贮箱压力控制技术进展

针对微重力下低温贮箱压力升高的问题,简要介绍了几种常用的低温贮箱压力控制的方法及原理,讨论了它们各自存在的问题,并简要展望未来低温贮箱压力控制技术的发展方向。文章指出,未来研究重点在于将主动制冷与被动绝热相结合,实现零蒸发贮存的热转移技术。     

Design of undercuts and dipole stabilizer rods for the CPHS RFQ accelerator

As part of the design and machining of the RFQ accelerator in the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University, the design process of the undercuts and dipole stabilizer rods is presented in this paper. In particular, the relationship between the inter-vane voltage slope and the local frequency of the undercut section is described quantitatively. With the identification of modes existing in the cavity, the specific parameters are optimized by the SUPERFISH and MAFIA codes. In addition, the water-cooling requirement of the dipole stabilizer rods is briefly discussed.