Radiation characteristics and implosion dynamics of tungsten wire array Z-pinches on the YANG accelerator

We investigated the radiation characteristics and implosion dynamics of low-wire-number cylindrical tungsten wire array Z-pinches on the YANG accelerator with a peak current 0.8-1.1 MA and a rising time ～ 90 ns.The arrays are made up of(8-32)×5 μm wires 6/10 mm in diameter and 15 mm in height.The highest X-ray power obtained in the experiments was about 0.37 TW with the total radiation energy ～ 13 kJ and the energy conversion efficiency ～ 9%(24×5 μm wires,6 mm in diameter).Most of the X-ray emissions from tungsten Z-pinch plasmas were distributed in the spectral band of 100-600 eV,peaked at 250 and 375 eV.The dominant wavelengths of the wire ablation and the magneto-Rayleigh-Taylor instability were found and analyzed through measuring the time-gated self-emission and laser interferometric images.Through analyzing the implosion trajectories obtained by an optical streak camera,the run-in velocities of the Z-pinch plasmas at the end of the implosion phase were determined to be about(1.3-2.1)×10 7 cm/s.     

650kV/2ns高压脉冲发生器研制

研制了一套峰值650kV、脉宽2ns的窄脉冲发生器,具有结构紧凑、体积小巧、便于移动和产生优质的纳秒高压脉冲等优点。该发生器基于三谐振脉冲变压器原理和脉冲形成压缩实现窄脉冲输出,采用紧凑双锥形绕组铁芯变压器、LC调谐回路和27pF,30Ω脉冲形成线组成三谐振回路,油介质自击穿开关导通后在负载上获得高压脉冲。实验结果表明,该窄脉冲发生器可在80Ω电阻负载上输出脉冲峰值约650kV,脉宽约2ns,与理论分析的结果相吻合。     

基于“神光-Ⅱ”装置的飞秒拍瓦级光学参量啁啾脉冲放大的特性分析与系统设计

用计算机仿真分析了光学参量啁啾脉冲放大（OPCPA）的特性及其影响因素（如相位失配、高阶非线性效应等）-就脉冲放大机理、时间同步、光谱漂移、增益窄化等相似问题与现有的啁啾脉冲放大技术做了比较与讨论-基于“神光-Ⅱ”装置，设计了飞秒拍瓦级OPCPA系统，以期望实现快点火- 关键词： 超短超强激光 啁啾脉冲放大 光学参量啁啾脉冲放大 数值模拟     

C60醛类衍生物非线性光学特性研究

研究了加合不同取代基团的C60醛类衍生物的光学非线性性质。利用简并四波混频（DFMW）方法获得了C60醛类各衍生物的三阶光学非线性超级化率γ^(3)及相应的三阶光学非线性系数χ^(3)值。同时也研究了它们各自的光限幅特性。结果表明：不同的取代基对C60醛类衍生物三阶光学非线性及光限幅特性的影响不同。     

Controlled growth and field emission of vertically aligned AlN nanostructures with different morphologies

The controllable growth of three different morphologies of AlN nanostructures (nanorod, nanotip and nanocrater) arrays are successfully realized by using chemical vapour deposition (CVD) technology. All three nanostructures are of single crystal h-AlN with a growth orientation of [001]. Their growth is attributed to the vapour-liquid-solid (VLS) mechanism. To investigate the factors affecting field emission (FE) properties of AlN nanostructures, we compare their FE behaviours in several aspects. Experimental results show that AlN nanocrater arrays possess the best FE properties, such as a threshold field of 7.2~V/μm and an emission current fluctuation lower than 4%. Moreover, the three AlN nanostructures all have good field emission properties compared with a number of other excellent cathode nanomaterials, which suggests that they are future promising FE nanomaterials.     

HIRFL-CSRm内靶实验终端CsI(Tl)电磁量能器性能模拟

基于GEANT4模拟了HIRFL CSRm内靶实验终端的CsI(Tl)电磁量能器系统,给出了CsI电磁量能器的最佳设计参数及可能达到的性能.结果表明,设计的CsI(Tl)电磁量能器系统能够满足所研究的物理要求. Based on the GEANT4, the performance of the electromagnetic calorimeter (EMC) of the internal-target detector at HIRFL-CSRm is simulated. The simulation results show that 1.5%—3% of the energy resolution σ_E/E and 2° of the polar angular resolution σ_θ can be obtained. The invariant mass of the π~0 decay can be reconstructed well. The performance can meet the requirement of studying the proposed physics at HIRFL-CSRm.     

Generation of 131 fs mode-locked pulses from 2.8μm Er:ZBLAN fiber laser

We demonstrated a femtosecond mode-locked Er:Zr F4-Ba F2-La F3-Al F3-Na F(Er:ZBLAN)fiber laser at 2.8μm based on the nonlinear polarization rotation technique.The laser generated an average output power of 317 m W with a repetition rate of 107 MHz and pulse duration as short as 131 fs.To the best of our knowledge,this is the shortest pulse generated directly from a mid-infrared mode-locked Er:ZBLAN fiber laser to date.Numerical simulation and experimental results confirm that reducing the gain fiber length is an effective way to shorten the mode-locked pulse duration in the Er:ZBLAN fiber laser.The work takes an important step towards sub-100-fs mid-infrared pulse generation from mode-locked Er:ZBLAN fiber lasers.     

微波消解-电感耦合等离子体发射光谱(ICP-OES)法测生物质中的碱金属和碱土金属

为研究并解决测试生物质样品中碱金属和碱土金属含量的干扰,采用微波消解-电感耦合等离子体发射光谱(ICP-OES)法对生物质中的碱金属和碱土金属钾、钙、钠、镁元素进行测定,考察了样品消解后不同的酸体系,共存元素干扰对钾、钠、钙、镁含量测定的干扰研究。经过研究表明,接近分析标准曲线酸浓度的样品干扰小,铅、铟、钛、锰元素对钠元素测定造成干扰,砷、铜、镉对钙元素测定干扰,铝对钾元素测定有干扰,镁测定不受共存元素干扰影响,运用干扰系数法可以减少共存元素对测定元素的误差。各待测元素标准曲线相关系数大于0.9996,检出限为0.0014~0.023 mg/L,玉米芯各元素的相对标准偏差为0.98%~1.9%,加标回收率为80.2%~106%;西瓜皮的各元素相对标准偏差为0.91%~2.3%,加标回收率为85.3%~106%。方法用于测定国家标准物质GBW07603,各元素结果均在标准值参考范围内。方法用于测定生物质中碱金属和碱土金属的结果,用t检验法与离子色谱测定值进行比对,结果无显著性差异。     

玉米粕蛋白质提取工艺的响应面法分析

探讨提取玉米粕蛋白质的最佳工艺条件。在单因素试验的基础上,选取料液比(g·mL-1)、温度、NaoH浓度为响应因子,玉米粕蛋白质的提取率为响应值,实施3因素3水平的响应面分析,建立数学模型,得出最佳工艺条件。试验结果表明,玉米粕蛋白质的最佳提取条件为:料液比1:6.89(g·mL-1)、温度44.92℃、NaoH浓度0.078mol·L-1,在此工艺条件下玉米粕蛋白质的提取率可达到40.57%。     

胂蛋白提取方法的研究

建立了Tris-HCl提取胂蛋白,HNO3-H2O2消解,氢化物发生-原子荧光光谱法测定胂蛋白总量的分析方法。并对Tris-HCl提取海虾中胂蛋白的不同提取条件进行了优化,结果表明:pH为8.5,抽提温度为20℃,抽提时间为30 min,固液比为1:10时胂蛋白的提取率最大;在仪器最佳工作条件下,按实验方法测得方法的检出限(3S/K)为As:0.12μg/L,相对标准偏差(RSD)为0.58%,相关系数为R=0.9997。