一种蛋白同化激素新药的成分分析及其尿样监控

利用红外光谱、核磁共振氢谱、紫外光谱以及质谱等表征手段对一种新型蛋白同化激素(AAS)口服药物的主成分进行了研究和鉴定,推定主成分为甲基-1-睾酮(methyl-1-testosterone, M1T, 17β-hydroxy-17α-methyl-5α-androst-1-en-3-one)。在此基础上,建立了M1T的气相色谱-质谱联用检测方法。方法的检出限（信噪比（S/N)为3)为2 ng/mL,定量限（S/N=10）为10 ng/mL;7次平行测定前处理后的加内标尿样的相对标准偏差为9.8%。用该方法测定了该药物在尿样中的排泄曲线。该方法的建立为AAS新药的发现、检测和监控做了很有意义的基础研究工作。     

熔体旋淬MI（NiCoMnAl）5贮氢合金的组织结构与电化学特性

对比研究了熔体旋淬和常规熔铸Ml(NiCoMnAl)     

A digital filtering scheme for SQUID based magnetocardiography

Considering the properties of slow change and quasi-periodicity of magnetocardiography (MCG) signal, we use an integrated technique of adaptive and low-pass filtering in dealing with two-channel MCG data measured by high $T_{\rm c}$ SQUIDs. The adaptive filter in the time domain is based on a noise feedback normalized least-mean-square (NLMS) algorithm, and the low-pass filter with a cutoff at 100Hz in the frequency domain characterized by Gaussian functions is combined with a notch at the power line frequency. In this way, both relevant and irrelevant noises in original MCG data are largely eliminated. The method may also be useful for other slowly varying quasi-periodical signals.     

X-ray observations of tungsten wire array Z-pinch implosions on QiangGuang-1 facility

Z-pinch experiments with two arrays consisting, respectively, of 32 4-μm- and 6-μm-diameter tungsten wires have been carried out on QiangGuang-1 facility with a current rising up to 1.5MA in 80ns. At early time of implosion, x-ray framing images show that the initial emission comes from the central part of arrays, and double clear emission rings, drifting to the anode and the cathode at 5×10⁶cm/s and 2.4×10⁷cm/s respectively, are often produced near the electrodes. Later, in a 4-μm-diameter tungsten wire array, filamentation caused by ohmic heating is prominent, and more than ten filaments have been observed. A radial inward shift of arrays starts at about 30\,ns earlier than the occurrence of the x-ray peak power for both kinds of arrays, and the shrinkage rate of emission region is as high as 1.7×10⁷cm/s in a 4-μm-diameter tungsten wire array, which is two times higher than that in a 6-μm one. Emission from precursor plasmas is observed in implosion of 6-μm-diameter tungsten wire arrays, but not in implosion of a 4-μm-diameter tungsten wire array. Whereas, in a 4-μm-diameter tungsten wire array, the soft x-ray emission shows the growth of m=1 instability in the plasma column, which is caused by current. The reasons for the discrepancy between implosions of 4-μm- and 6-μm-diameter tungsten wire arrays are explained.     

黄花倒水莲皂甙Reinioside C在大鼠体内代谢产物的鉴定

为了探讨五环三萜皂甙ReiniosideC在大鼠体内代谢产物的结构,单剂量口服ReiniosideC,5h后放血处死,用制备型高效液相色谱方法对血液和各脏器进行提取分离,从大肠内容物和粪中,分离得到了7种代谢产物.用FAB-MS,¹H NMR和¹³C NMR方法鉴定了它们的结构.     

激光驱动气库靶对铝的准等熵压缩实验研究

利用激光驱动气库材料形成的等离子体射流对材料进行斜波加载, 可以获得高应变率的准等熵压缩. 在神光III 原型高功率激光装置上开展了激光驱动铝材料的准等熵压缩实验, 成像型速度干涉仪VISAR记录到样品自由面连续、光滑的速度历史, 采用反积分法得到60 GPa以上的峰值压强, 加载上升沿约10 ns,应变率可达10⁸ s ^-1, 并且观察到了压缩波在样品后表面的反射效应.     

微通道板玻璃的电阻率

叙述微通道板玻璃的电阻率和其氢原处理后的表面电阻率以及表面电阻率的影响因素。按照玻璃钢络结构观点并就微通道板制造工艺中出现的电阻率差异进行了分析。最后，给出了改进措施。     

用内光发射瞬态电流温度谱测定a-Si:H的隙态密度分布

本文提出了一种新的研究a-Si:H隙态密度分布的方法——内光发射瞬态电流温度谱。利用这种方法,我们测量了辉光放电制备的a-Si:H材料的隙态密度分布。所得结果在结构上与通常的场效应法结果相似,但在数值上比场效应法结果约小一到两个数量级。 关键词：     

纤维素衍生物作为毛细管气相色谱新型固定相的研究

以纤维素三苯甲酸酯、纤维素三苯基氨基甲酸酯以及二者的混合物为固定相,制备了新型毛细管气相色谱柱,最高柱效达到2580板/米。其能对一些难分离物质对、位置异构体以及手性化合物进行拆分,如对丙氨酸的分离因子可达到1·13。此外,还研究了毛细管柱的极性、选择性以及保留机理。结果表明,该类聚合物是一类很有前景的新型气相色谱固定相。     

丝阵Z箍缩1维X射线辐射功率分布的数据处理

 在丝阵Z箍缩实验中利用CCD记录X射线辐射功率的1维时空分布图像,对光纤传输效率、图像聚焦、MCP与CCD的耦合效率等因素造成的图像失真进行了处理,利用实验实测的单光纤点扩展图像和光传输效率曲线对辐射功率分布图像进行处理,并修正光纤传输效率以及MCP和CCD间耦合效率不均匀性的影响以还原X射线辐射功率的1维空间分布信息。处理后将图像沿空间积分获得了与X射线功率谱仪相吻合的X射线辐射功率脉冲波形,同时不同发次由两系统得到的X射线波形的前沿之间也表现出了良好的一致性。