On-line preconcentration of inorganic mercury and methylmercury in sea-water by sorbent-extraction and total mercury determination by cold vapour atomic absorption spectrometry

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C(18) minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 microl. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/- 3.4% at 0.5 microg/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.     

Simultaneous spectrophotometric determination of La, Ho, Mn 5-Br-PADAP complexes using multivariate calibration with partial least-squares (PLS) data evaluation

A simple and fast analytical pocedure is proposed for the simultaneous spectrophotometric determination of lanthanum, holmium and manganese in synthetic ceramics, (La(0.8-x) Hox Sr0.2 MnO3), by using the partial least-squares (PLS) method. As chromogenic agent 5-Br-PADAP [2-(5-bromo-2-pyridylazo)-5-diethylaminophenol] was used, which form colored complexes with the three elements studied. To avoid metal hydrolysis, a mixture of ethanol and Triton X-100 at pH 9.5 was used for all experiments. A set of 17 calibration solutions measured throughout the 400-700 nm wavelength range was used in the calibration step. The concentration range for Mn(II) was 1-12 x 10(-6) mol L-1, while the range for the rare earth elements La(III) and Ho(III) was 2-8 x 10(-6) mol L-1. In order to demonstrate the applicability of the proposed method, a set of artificial samples containing the three analytes in variable proportions was prepared and analyzed. The analytical results obtained were quite acceptable with relative errors not greater than 7% in most cases.     

A common method for the determination of several calcium channel blockers using an HPLC system with ultraviolet detection

We report a common HPLC method for the single or simultaneous determination of four calcium channel blockers (CCB), namely diltiazem (DTZ), verapamil (VER), nifedipine (NIF) and nitrendipine (NIT) and their active metabolites demetildiltiazem and deacetildiltiazem (MA and M1), norverapamil (NOR), and dehydronifedipine (DHN). DHN was first synthesised in our laboratory and different pH values of the mobil phase were subsequently prepared and tested for chromatographic separation. The detection system and the environmental light conditions were optimised. The best separations of all analytes were obtained using a C₁₈ column and a mobile phase of methanol, 0.04 M ammonium acetate, acetonitrile and triethylamine (2:2:1:0.04 v/v). Quantitation was performed using imipramine (IMI) as the internal standard. For DTZ and its metabolites (M1 and MA), the wavelength chosen was 237 nm; for VER and its metabolite NOR, it was 210 nm; and, finally for NIF and its metabolite DHN and NIT it was 216 nm. When a simultaneous analysis was carried out the wavelength was of 230 nm. The optimum pH were 7.90 and 7.10 when the separation of NIT and DTZ or VER and NIF were carried out, respectively, and 7.90 when a simultaneous separation was carried out. The detection limit of the assay was less than 8 ng ml⁻¹ for all compounds, with coefficients of variation less than 7% (for inter- and intra-day) over the concentration range of 1–1000 ng ml⁻¹. The retention times were less than 11 min. When NIF or NIT were studied, it was necessary to use a sodium vapour lamp in order to avoid the photodegradation which takes place under daylight conditions.     

Pentacoordinate nickel(II) complexes double bridged by phosphate ester or phosphinate ligands: spectroscopic, structural, kinetic, and magnetic studies

The bis(phosphatediester)-bridged complexes [[Ni([12]aneN(3))(mu-O(2)P(OR)(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), 2,4,4-trimethyl-1,5,9-triazacyclododec-1-ene; R=Me (1), Bu (2), Ph (3), Ph-4-NO(2) (4); [12]aneN(3)=Me(4)[12]aneN(3), 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene; R=Me (5), Bu (6), Ph (7), Ph-4-NO(2) (8)] were prepared by hydrolysis of the phosphate triester with the hydroxo complex [[Ni([12]aneN(3))(mu-OH)](2)](PF(6))(2) or by acid-base reaction of the dialkyl or diaryl phosphoric acid and the above hydroxo complex. The acid-base reaction was also used to synthesise the phosphinate-bridged complexes [[Ni([12]aneN(3))(mu-O(2)PR(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), R=Me (9), Ph (10); [12]aneN(3)=Me(4)[12]aneN(3), R=Me (11), Ph (12)]. The molecular structures of complexes 2, 3 and 12 were established by single crystal X-ray diffraction studies. The eight-membered rings defined by the nickel atoms and the bridging ligands show distorted twist-boat, chair and boat-boat conformations in 2, 3 and 12, respectively. The experimental susceptibility data for compounds 2, 3 and 12 were fitted by least-squares methods to the analytical expression given by Ginsberg. The best fit was obtained with values of J=-0.11 cm(-1), D=-9.5 cm(-1) and g=2.20 for 2; J=-0.97 cm(-1), D=-9.3 cm(-1) and g=2.21 for 3; and J=-0.14 cm(-1), D=-11.9 cm(-1) and g=2.195 for 12. The magnetic-exchange pathways must involve the phosphate/phosphinate bridges, because these favour antiferromagnetic interactions. The observation of a higher exchange parameter for compound 3 is a consequence of a favourable disposition of the O-P-O bridges. The kinetics for the hydrolysis of TNP (tris(4-nitrophenyl)phosphate) with the dinuclear nickel(II) hydroxo complex [[Ni(Me(3)[12]aneN(3))(mu-OH)](2)](PF(6))(2) was studied by UV-visible spectroscopy. The proposed mechanism for TNP-promoted hydrolysis can be described as one-substrate/two-product, and can be fitted to a Michaelis-Menten equation.     

Synthesis and Crystal Structure of a New Copper(II) Complex with 4-Cyanobenzoic Acid

1 INTRODUCTION Exploration on the syntheses and properties of car- boxylate complexes, especially aromatic carboxylate complexes, has always been a fascinating and chal- lenging research field for decades either in coor- dination chemistry or in functional materials[1, 2]. Cy- anobenzoic acid (Hcba) possessing two functional coordination groups should display structural diver- sities on the formation of complexes[3～15]. In particu- lar, the copper(II) carboxylate complexes bearing spe- …     

Synthesis and Crystal Structure of a 1-D Chain Zinc（Ⅱ） Coordinated Polymer with N-p-Tolysulfonyl-glutamine

A novel coordination polymer {[Zn(ts-gln)(bipy)]3H2O}n (ts-glnH2=N-p-toly-sulfonyl-glutamine,bipy=2,2-bipyridine) has been prepared and structurally characterized by X-ray diffraction method. It crystallizes in orthorhombic,space group P212121 with a=8.2622(5),b=16.6244(10),c=18.2807(10) ,V=2510.9(3) 3,C22H28N4O8SZn,Mr=573.91,Z=4,Dc= 1.518 g/cm3,μ(MoKa)=1.115 mm-1,F(000)=1192,the final R=0.0262 and wR=0.0662 for 5691 independent reflections with Rint=0.0240. The zinc(Ⅱ) atom is coordinated by N(3) and N(4) atoms of a bipy molecule,two carboxylate O(1) and O(2A) and amino N(1) atoms of ts-gln ligands,resulting in a square-pyramidal geometry. The title complex consists of an infinite zigzag chain of zinc(Ⅱ) ions linked by the carboxylate of N-p-tolysulfonyl-glutamine.     

Adiabatic squeezing of molecular wave packets by laser pulses

Strong pulse sequences can be used to control the position and width of the molecular wave packet. In this paper we propose a new scheme to maximally compress the wave packet in a quasistatic way by freezing it at a peculiar adiabatic potential shaped by two laser pulses. The dynamic principles of the scheme and the characteristic effect of the different control parameters are presented and analyzed. We use two different molecular models, electronic potentials modeled by harmonic oscillators, with the same force constants, and the Na(2) dimer, to show the typical yield that can be obtained in compressing the initial (minimum width) molecular wave function.     

Morphological and structural characteristics of diazo dyes at the air-water interface: in situ Brewster angle microscopy and polarized UV/vis analysis

A morphological analysis is presented for Langmuir films of the diazo dyes Sudan 4 (S4), Sudan 3 (S3), and Sudan red (SR), using Brewster angle microscopy. Stable nonmonomolecular structures are formed at the air-water interface denoted as a plateau in the pressure-area isotherms. Monolayer domains are evident by the contrastless image even before the pressure onset, which grow in size until it reached a condensed monolayer. This behavior resembles that of Langmuir films from simple aromatic fatty acids. Films from all the azo dyes display similar features, according to the surface potential isotherms and in situ polarized UV/vis spectroscopy except for the larger area per molecule occupied by S4 and SR. This is attributed to the presence of CH(3) groups that cause steric hindrance modifying the organization of diazo dye molecules at the air-water interface. UV/vis polarized absorption spectroscopy showed preferential orientation of S4 and S3 on the water surface, while SR molecules lie isotropically. For these three diazo dyes, film absorption was negligible at very large areas per molecule, becoming nonzero only at a critical area coinciding with the onset of surface potential. The critical area is ascribed to the formation of a H-bonded network between water molecules and diazo dye headgroups.     

Exo-metal coordination by a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 dimer in [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (2-NC5H4 = 2-pyridyl, C5H5N = pyridine)

The in situ reaction of the phosphazane dimer [CIP(mu-N-2-NC5H4)]2 (2) with CuCl in the presence of CsH5N/H2O gives the title complex [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (1), containing a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 ligand which is isoelectronic with species of the type [(P(mu-NR))2NR]2.     

Steric control in the oligomerisation of phosphazane dimers; towards new phosphorus-nitrogen macrocycles

The reaction of [ClP(mu-NtBu)]2 (1) with H2O (1 : 2 equivalents) in the presence of excess Et3N gives the new chain compound [(mu-O)[P(mu-NtBu)2P(H)=O]2] (3), consisting of two P2N2 rings linked by a mu-O atom and terminating in P(V)(H)=O groups. A similar chain species is obtained from the reaction of the lithiate of [(tBuNH)P(mu-NtBu)2P(H)=O] (5) with [ClP(mu-NtBu)2P(NHtBu)] (2), the product being [(mu-O)[P(mu-NtBu)2P(NHtBu)]2] (6). Compounds 3 and 6 are the first examples of O-bridged chain phosphazanes and potential precursors to new phosphorus-nitrogen macrocycles. The syntheses and X-ray structures of 3, 5 and 6 are reported.