Determination of triclosan in foodstuffs

A reverse-phase high-performance liquid chromatographic (RP-HPLC) method coupled with an ultraviolet detector was developed to determine triclosan which had migrated into foodstuffs from packaging materials. The method includes extraction with hexane, followed by evaporation to dryness and residue re-dissolution in ACN 90%. Chromatographic separation was performed with a Kromasil 100 C18 column (15 cm x 0.4 cm ID, 5 microm particle size) at 30 degrees C and using ACN and water as mobile phases. Regarding recoveries, good results (higher than 83% and lower than 112%) were obtained for the three representative food matrixes selected (orange juice, chicken breast meat, and Gouda cheese).     

(+)- and (-)-2-aminocyclobutane-1-carboxylic acids and their incorporation into highly rigid beta-peptides: stereoselective synthesis and a structural study

[Chemical reaction: See text] Several derivatives of (+)- and (-)-2-aminocyclobutane-1-carboxylic acid, 1, have been prepared through enantiodivergent synthetic sequences. The stereoselective synthesis of free amino acid (+)-1 has been achieved, and this product has been fully characterized for the first time. Stereocontrolled alternative synthetic methodologies have been developed for the preparation of bis(cyclobutane) beta-dipeptides in high yields. Among them, enantio and diastereomers have been synthesized. beta,beta- and beta,delta-Dimers resulting from the coupling of a cyclobutane residue and a linear amino acid have also been prepared. The ability of the cyclobutane ring as a structure-promoting unit both in the monomers and in the dimers has been manifested. The NMR structural study and DFT theoretical calculations evidence the formation of strong intramolecular hydrogen bonds giving rise to cis-fused [4.2.0]octane structural units that confer high rigidity on these molecules both in solution and in the gas phase. The contribution of a cis-trans conformational equilibrium derived from the rotation around the carbamate N-C(O) bond has also been observed, the trans form being the major conformer. In the solid state, this equilibrium does not exist, and moreover, intermolecular hydrogen bonds are present.     

Highly stereoselective synthesis, structure, and application of (E)-9-[2-(silyl)ethenyl]-9H-carbazoles

(E)-N-(Silyl)vinylcarbazole has been easily prepared via a new catalytic route, silylative coupling (SC) of vinylcarbazole with vinyltrisubstituted silanes catalyzed by [RuH(Cl)(CO)(PCy3)2]. X-ray structures of two silylvinylcarbazoles as first N-vinylcarbazole derivatives have been resolved. The Pd-catalyzed Hiyama coupling reaction (also as the tandem reaction with SC) of synthesized (E)-N-(triethoxysilyl)vinylcarbazole with iodobenzene has been performed to afford (E)-N-(phenylvinyl)carbazole with high yield and stereoselectivity.     

Synthesis and biological evaluation of spongistatin/altohyrtin analogues: E-ring dehydration and C46 side-chain truncation

Simplified analogues of the potent antimitotic marine macrolide spongistatin 1/altohyrtin A were synthesised and evaluated as growth inhibitory agents against a range of human tumour cell lines, including Taxol-resistant strains, revealing that E-ring dehydration leads to enhanced cytotoxicity at the low picomolar level while truncation of the side-chain at C46 results in a drastic decrease in activity.     

Detection of soil pollution by hydrocarbons using headspace-mass spectrometry and identification of compounds by headspace-fast gas chromatography-mass spectrometry

The direct coupling of a headspace sampler with a mass spectrometer is proposed as a screening tool for the rapid detection of soil pollution by hydrocarbons from petroleum and derivatives. The samples are subjected to the headspace generation process, with no prior treatment, and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of the sample analysed. Suitable treatment of the signal by chemometric techniques allows unequivocal characterisation of the different types of sample. The use of fast gas chromatography with a mass spectrometer detector coupled to the headspace sampler allows identification of the major hydrocarbons present in the mineral and organic polluted samples, interpretation of the results obtained, and demonstrates the analytical potential of headspace-mass spectrometry coupling.     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

Tetrabutylammonium bromide/thenoyltri-fluoroacetone/mibk extraction for aas determination of cobalt, nickel, and manganese in copper ores and concentrates

An extraction-AAS method of determination of Co, Ni, and Mn in metallurgical copper materials containing considerable amounts ofCu, Fe, Pb, Zn, and Al has been developed. Good selectivity of group separation of Co, Ni, and Mn has been achieved by (a) the use of tetrabutylammonium bromide to improve extractability of HTTA complexes by ion-pair formation, and (b) the masking of major elements with sodium thiosulphate and sulphosalicylic acid. The extracts are stable for at least 3 weeks.     

Spectroscopic investigation of the adsorption and oxidation of thiourea on polycrystalline Au and Au(111) in acidic media

In the present paper, a systematic electrochemical investigation on thiourea (TU) electrooxidation was developed on polycrystalline and (111) single-crystal gold electrodes in 0.1 M perchloric acid. The combination of cyclic voltammetry with in situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry techniques have allowed the nature of the species formed during the electroadsorption and electrooxidation of TU to be established. FTIRS experiments were performed in D2O to clean up the region of the H2O bending around 1600 cm(-1). It was concluded that TU adsorbs tilted on the surface in the 0.05-0.40 VRHE potential range. A dual-path reaction mechanism was evidenced in the oxidation process. The first pathway takes place from adsorbed TU at E > 0.40 VRHE and implies the formation of [Au(I)-(TU)2]+, which is oxidized to NH2CN and S0 at E > 0.80 VRHE. In a following oxidation step at E > 1.20 V, N2, CO2, and HSO4-/SO4(2-) were produced. The second parallel reaction occurs from TU in solution at E > 0.50 VRHE to form (TU)2(2+). All these species were characterized from the spectroscopic experiments. Similar results were obtained for both surfaces.     

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.     

Amperometric multidetection with composite enzyme electrodes

The use of composite biosensors for multianalyte detection strategies is discussed. Graphite–Teflon rigid composite biosensors offer the possibility of coimmobilization of several enzymes by simple physical inclusion in the bulk of the electrode matrix with no covalent linkages. A novel trienzyme graphite–Teflon–glucose oxidase (GOD)–alcohol oxidase (AOD)–peroxidase (HRP)–ferrocene bisosensor yielded amperometric steady-state currents similar to those obtained with graphite–Teflon–GOD–HRP–ferrocene and graphite–Teflon–AOD–HRP–ferrocene electrodes for the same concentration of glucose and ethanol, respectively. The performance of the trienzyme biosensor for multianalyte detection was evaluated with the simultaneous determination of glucose and ethanol after separation by HPLC, in samples of sweet wine. The simultaneous analysis of several analytes in the same sample should imply that, with an adequate dilution, the concentration levels of the analytes can be included within the ranges of linearity of the corresponding calibration plots. The use of two composite biosensors in a parallel configuration, so that different analytes can be simultaneously detected with no need of chromatographic separation, is also discussed. The usefulness of this approach was evaluated by the simultaneous analysis of glucose and ethanol in sweet wine, and of glucose and lactic acid in red wine.