基于2-苯基-4-喹啉酸及双咪唑类配体的钴(Ⅱ)配合物的合成、表征、磁性和电化学性质

利用2-苯基-4-喹啉酸、苯-1, 4-双(咪唑基-1-甲基)和乙酸钴在二甲基甲酰胺和水的混合溶剂中反应, 得到配合物[Co(pqba)₂(biyb)](1) (Hpqba=2-苯基-4-喹啉酸, biyb=苯-1, 4-双(咪唑基-1-甲基))。采用元素分析、红外光谱、X单晶衍射结构分析、热重分析等方法对配合物进行了表征和结构测定。配合物1属单斜晶系, C2/c空间群。配合物1中的Biyb配体采用双齿桥链模式连接金属钴离子首先形成一维“之”字链, 通过π…π堆积作用, 进一步拓展为二维超分子结构。循环伏安法测试结果说明配合物1的电解过程为准可逆过程。磁化率测量表明, 配合物1具有反铁磁性质。     

机动车尾气净化催化剂金属载体涂层的研究

采用Fe-Cr-Al-Y金属载体为研究对象,用氧化-磷化和溶胶-凝胶技术在金属载体表面形成活性γ-Al2O3涂层,实验确定了合适的磷化温度和磷化时间、溶胶中γ-Al2O3浓度和升温机制,结果证明预先在载体表面涂覆一层氧化-磷化膜,有助于提高活性组分与金属载体的结合力,可以获得高结合强度且活性组分均匀分布的涂层.     

溶胶-凝胶法制备金属基γ-Al2O3活性涂层的研究

用磷化和溶胶-凝胶技术在Fe-Cr-Al-Y合金材料表面制备活性γ-Al2O3涂层, 实验确定了合适的磷化温度、磷化时间和涂覆溶胶中Al2O3浓度; 分析了涂覆溶胶中添加剂ST(自制)含量及涂覆次数对活性涂层与基体结合力的影响. 结果证明 预先在载体表面形成一层磷化膜以及添加含量不超过0.03%的无机组分ST均可以获得高结合强度且活性组分均匀分布的涂层.     

以Na2S2O4为还原剂光度法测定废水中硝基苯

对废水中硝基苯的分光光度测定法进行了改进。提出在碱性介质中,以连二亚硫酸钠(Na2S2O4)为还原剂将硝基苯还原为苯胺,经重氮化后与N (1 萘基) 乙二胺盐酸盐偶合生成紫红色化合物,其最大吸收波长为552nm,测定范围为0～2.4mg/L,摩尔吸光系数为3.36×104L·mol-1·cm-1。     

一种用于大容量逆流色谱制备的立式多层螺旋管行星式离心机

Owing to no complications caused by solid supports, such as adsorptive sample loss and deactivation, tailing of solute peaks, and contamination, countercurrent chromatography (CCC) has been an area of intense research since the first introduction of CCC in 1970,[1] and various apparatus and broad applications have been advanced[2,3]. For these developments, the type-J synchronous planet centrifuge has received considerable attention, which relies not only on its relatively simple mechanic design, but also on its high partition efficiency and short elution time caused by mixing and settling for the efficient chromatographic separations. In the past, however, almost all of type-J centrifuges rotated slowly were disposed horizontally due to the original design and some experiments that gravis plays an important role at a low rotary speed as similar to type-V rotating multilayer helical tube in unit gravity[4-9]. In fact,we discovered that the upright apparatus holds more retention of stationary phase than the horiziontal aparatus when large standard tubings were used as mutilayer coil column and the aparatus was operated under same contions. We report here a new coil planet centrifuge with four upright cylindrical columns for large scale countercurrent chromatographic preparation. The design principle and apparatus of UCCC is as samilar to type-J multilayer coil planet centrifuge. Four uptight cylindrical column holders are symmetrically arranged around the centrifuge axis as similar to the type-J HSCCC with three horizontal multilayer coils connected in series[8] . A series of experiments indicat that upright CCC has many advantages over the horizontal CCC when using a large-bore tube as multilayer coil column for large scale countercurrent chromatographic separation.Upright CCC provide a versatile countercurrent chromatographic method for large-scale preparation from very crude sample. It has good preparative capacity and flexible suitability to various sample and two-phase system.The present apparatus not only can be operated at a high speed as similar as commonly used HSCCC for the system having short settling time and but also can be run at a low speed for the system having relative long settling time. Because of automatical control and seal-free flow through device, the uptight CCC apparatus may be readily scaled up to industrial preparation.     

硅烷化对NH3选择性催化还原NOx催化剂CuCe/BEA水热稳定性的促进作用

采用硅烷化改性NH₃选择性催化还原NO_x催化剂CuCe/BEA,以提高催化剂的水热稳定性。X射线衍射、扫描电子显微镜和²⁷Al核磁共振谱图等研究证实,硅烷化改性明显抑制BEA分子筛骨架中Si-O-Al键的水解,保持其结构完整,从而有效提高水热处理后CuCe/BEA的催化活性。氨气-程序升温脱附和原位漫反射傅里叶变换红外光谱研究结果表明,硅烷化改性的催化剂由于保持更完整的骨架结构能够形成更多的酸性位点。此外,氢气-程序升温还原和X射线光电子能谱测试表明,硅烷化改性有利于提高活性铜物种的分散性。因此,相比于CuCe/BEA催化剂,硅烷化改性的CuCeSi/BEA催化剂具有更多的酸性位点和高度分散的Cu物种,共同促进了催化剂的水热稳定性。     

R基团搜索技术用于硼酸三肽蛋白酶体抑制剂的分子设计

本文采用Topomer CoMFA对44个Tyropeptin硼酸三肽类蛋白酶体抑制剂进行三维定量构效关系(3D-QSAR)分析。所得最优模型的拟合、交互验证、及外部验证的复相关系数分别为0.983、0.651、0.963。采用Topomer search对ZINC数据库进行R基团的虚拟筛选,得到具有特定活性贡献的R基团,以活性最高的分子为模板过滤,得到7个R1和5个R2基团。并以此设计得到活性优于模板分子的20个新化合物。结果表明,所建立的Topomer CoMFA模型具有良好的稳定性和预测能力,基于R集团的Topomer search技术可以有效筛选,并为设计出新的蛋白酶体抑制剂提供理论依据。     

后疫情时代微信融入无机化学实验教学的初探

针对后疫情时代的教学需要和地方高校的信息化教学资源的不足,通过创建微信公众号和微信群,初步探索了微信融入无机化学实验教学的新模式。课前通过公众号的推文引导学生进行有目标的预习,养成自主学习和独立思考的习惯。课堂中,先通过微信群进行预习测试,并基于测试反馈调整需要重点讨论的实验要点,再通过微信群共享师生在实验过程中对实验操作、实验现象和实验结果拍摄的照片或视频,充分激发学生兴趣,提升学生的能力。课后结合拍摄的错误操作的照片撰写公众号推文,进行实验反馈,帮助学生形成反思的习惯。     

质子交换膜燃料电池铂基催化剂研究进展北大核心CSCD

燃料电池是一种将化学能直接转化为电能的能量转换装置,具有能量密度高、利用率高、清洁安静等优点。在不同类型的燃料电池中,质子交换膜燃料电池(PEMFC)不仅能量密度高,而且具有在近常温条件下工作的特点,因此受到广泛关注。目前,商业化PEMFC仍采用铂基纳米材料作为催化剂,其中缺乏低成本、高效的阴极催化剂是限制PEMFC性能提升和成本降低的关键因素之一。本文综述PEMFC催化剂的结构可控制备及其对阴极氧还原反应和膜电极性能的影响,阐述调控催化剂结构提高PEMFC性能的方法,特别是提高贵金属催化剂的利用率,降低膜电极中贵金属用量的研究进展。     

一种高灵敏、多响应的Zn-MOF荧光传感器对Fe3+、2，4，6-三硝基苯酚和奥硝唑的检测

在水热条件下基于H₄bta(1,2,3,5-苯四酸)和bpy(4,4''-联吡啶)配体设计、合成了一个锌的金属有机骨架(Zn-MOF){[Zn₂(bta)(bpy)(H₂O)₂]·H₂O}_n(1),并用元素分析、红外光谱、X射线单晶衍射等对其进行了结构表征。MOF 1为三维网状结构。完全去质子化的(bta)^4-配体采用了μ₆-η¹-η²-η²-η¹螯合桥联配位方式。有意思的是,MOF 1是一种高灵敏度、选择性好、多响应的荧光传感器,可用于Fe³⁺、2,4,6-三硝基苯酚和奥硝唑的快速检测。此外还研究了1的热稳定性。