Fibonacci序列的差分序列对应实数的有理逼近（英文）

基于Fibonacci序列的构造,我们给出Fibonacci实数的无理指数的新证明.另外,我们得到Fibonacci序列的差分序列所对应实数的无理指数.     

Prediction of a monolayer spin-spiral semiconductor:CoO with a honeycomb lattice

The recent successful fabrication of two-dimensional(2D) Co O with nanometer-thickness motivates us to investigate monolayer Co O due to possible magnetic properties induced by Co atoms. Here, we employ first-principles calculations to show that monolayer Co O is a 2D spin-spiral semiconductor with a honeycomb lattice. The calculated phonon dispersion reveals the monolayer’s dynamical stability. Monolayer Co O exhibits a type-I spin-spiral magnetic ground state. The spinspiral state and the dire...     

不同形状的钨酸钡纳米粒子的合成

不同形状的钨酸钡纳米粒子的合成;微乳液;钨酸钡;纳米粒子;十二胺;十一烯酸     

UV LASER INITIATED STEREOSELECTIVE HOMOGENEOUS CATALYSIS POLYMERIZATION OF PHENYLACETYLENE

In this paper, the stereoselective homogeneous catalysis polymerization of phenylacetylene by using two kinds of catalysts W(CO)_5CH_3I and W(CO)_4I_2 produced from UV laser photolysis of W (CO)_6 in CH_3I, I_2—C_6H_6 and CHI_3—C_6H_6 respectively was studied. The effects of laser energy, laser irradiation time and lifetime of catalyst on the polymerization of phenylacetylene were discussed. The photoproducts of W (CO)_6 in CH_3I, I2—C_6H_6 and CHI_3—C_6I_6 were determined by IR spectra. The structures of polyphenylacetylene obtained by W (CO)_5CH_3I and W (CO)_4I_2 catalysts were characterized by IR spectra and ~1H NMR spectra.     

羧基丁苯-纳米氧化硅复合粉末增韧聚苯乙烯的研究

用直接分散聚合法制备了羧基丁苯-纳米氧化硅杂化胶乳,经喷雾干燥得到的羧基丁苯-纳米氧化硅复合粉末通过本体-悬浮聚合和熔融共混法制备了高抗冲聚苯乙烯.结果表明,本体/悬浮聚合法中预聚转化率的控制与复合粉末的加入量有关,当加入的复合粉末的质量分数为0.05时,冲击强度可提高5倍,也高于熔融共混法所制备的改性聚苯乙烯.本体/悬浮聚合法制备的改性聚苯乙烯的热分解温度（Td）高于熔融共混法改性的,且Td随复合粉末加入量的增加而提高,但改性聚苯乙烯的刚性有一定程度的降低,而对材料的玻璃化转变温度影响不大.     

Interaction of light filaments in air

This paper analytically investigates the interaction of light filaments generated by a femtosecond laser beam in air. It obtains the Hamiltonian of a total laser field and interaction force between two filaments with different phase shifts and crossing angles. The property of the interaction force, which leads the attraction or repulsion of filaments, is basically dependent on the phase shift between filaments. The crossing angle between two filaments can only determine the magnitude of the interaction force, but does not change the property of the force.     

赤潮光谱特征及其形成机制

采用海面以上光谱测量方法 (Above water method),利用美国FieldSpec® Dual VNIR光谱仪测量了丹麦细柱藻、中肋骨条藻、海洋褐胞藻等三种浮游植物赤潮以及红色中缢虫这一原生动物赤潮的离水辐射光谱数据。强调赤潮与正常海水的光谱差异在于687～728 nm波段的特征反射峰,指出了浮游植物赤潮与原生动物赤潮间的显著光谱差异,并认为可据此进行某些赤潮种类的遥感识别。给出了浮游植物赤潮光谱反射峰、吸收峰成因;红色中缢虫这一原生动物引起的水色异常,与其体内的共生藻类及浮游植物色素碎屑有关;其摄食偏好、与藻类的共生特性研究以及藻类常温下的荧光发射特性研究,将有助于加深对于红色中缢虫赤潮光谱成因的认识。     

飞秒激光脉冲的高效率放大研究

介绍了采用多通放大的飞秒脉冲掺钛蓝宝石激光放大系统,分析讨论了提高放大效率及缩短脉冲宽度的技术方法。在仅用能量２９０ｍＪ的倍频Ｎｄ：ＹＡＧ激光泵浦下,得到了输出峰值功率大于１．４ＴＷ、脉宽２５ｆｓ、重复频率１０Ｈｚ的超短超强激光脉冲。     

铁磁性设备补偿磁场的数学模型及其应用

研究用永磁体对铁磁性设备进行磁场补偿的问题,建立了补偿磁场的数学模型.将设备划分成若干个小长方体后,基于磁矩量法建立了数学模型,并对补偿磁场进行拟合.在计算模型中的耦合系数矩阵时,用多个点的平均值作为耦合系数的有效值,提高了计算结果的可靠性和稳定性.并且,针对永磁体距离设备很近时,设备呈现出的非线性磁化特性,通过优化方法求解各个单元的等效磁化率,这种方法不需要知道铁磁材料的磁化曲线和设备结构,便于计算和实际应用.最后,通过实验设计与数值计算,得到了永磁体对设备进行补偿的磁场分布,模型计算结果与实际测量数据误差11%以内,这说明该模型能够满足工业要求,具有实际应用价值.     

飞秒激光等离子体中成丝现象的研究

采用光学阴影法和散射光成像,对飞秒激光等离子体中的局域密度涨落进行了,在实验中观察到了成丝不稳定性现象,从理论上对有质动力引起的局域密度涨落进行了分析,分析表明,这种成丝不稳定性主要是由有质动力造成的。