乙醇羰化反应负载型催化剂的研究

本文由七种负载型催化剂中选出两种比较好的乙醇羰化催化剂,研究了影响反应转化率和选择性的因素,考察了活性组份的价态和载体的酸性。此外,还对催化剂进行了能量色散X射线分析。从其结果看,谱图上只有活性中心铑的谱峰而没有氯的谱峰,说明铑是以离子形式进入载体,而不是以化合物形式被吸附于载体上。     

GC/MS 法测定超临界 CO2 萃取茼蒿籽油

利用GC/MS分析了超临界CO2萃取茼蒿籽油的成分组成,共检出32种成分。茼蒿籽油主要由亚油酸（含量68.32%)、棕榈酸（10.80%)、油酸(6.39%)和长碳链脂肪酸组成;茼蒿籽油还含甾类（4.76%)和丰富的维生素E（3.9mg/g);研究了茼蒿籽油的理化特征。     

猪肝脏和肌肉组织中β-兴奋剂克伦特罗的高效液相色谱电喷雾质谱分析研究

建立了猪肉和肝组织中克伦特罗的高效液相色谱电喷雾质谱(HPLC—ESI／MS)分析方法。在最佳色谱条件下克伦特罗的保留时间为16min,样品空白无干扰。定量分析的线性范围为2—100mg／L;最低检出限为0．75mg／L;方法回收率为95％-98％;RSD小于2．0％。利用ESI／MS／MS对β-兴奋剂克伦特罗进行了质谱解析,选择特征离子峰m／z277、259和203作为准确定性的依据。对实际生物样品猪瘦肉和肝进行检测结果表明,当样品中克伦特罗残留含量较高时,可以利用紫外检测数据对其进行准确定量。当残留含量低于最低检出限时,可以根据HPLC／ESI／MS结果中有无特征峰出现,给出较准确的定性结果。     

Non-contact angle measurement based on parallel multiplex laser feedback interferometry

We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle variation of the target. Due to its ultrahigh sensitivity to the feedback light, PLFI realizes the direct non-contact measurement of non- cooperative targets. Experimental results show that PLFI has an accuracy of 8＂ within a range of 1400＂. The yaw of a guide is also measured and the experimental results agree with those of the dual-frequency laser interferometer Agilent 5529A.     

Generation and Modulation of Phase Difference of Output Intensities in a Feedback Nd:YAG Laser with an Extracavity Waveplate Rotated

External anisotropic feedback effects on the phase difference behaviour of output intensities in a microchip Nd：YAG laser are presented. By rotating a quarter wave plate placed in the external cavity, the angle between laser initial polarization direction and o-axis of the wave plate is tuned from -45°to 45°, which results in variable extra-cavity birefringence along two orthogonal detection directions. With only one optical path and one wave plate, laser intensities of the two orthogonal directions, both modulated by the external cavity length, are output with a tunable phase difference, which can be continuously changed from zero to twice as large as that of the waveplate. Experimental results as well as a theoretical analysis based on Fabry-Perot cavity equivalent model and the refractive index ellipsoid, are presented. The potential applications of this phenomenon are also discussed.     

SiC纤维增强Ti17合金复合材料轴向残余应力的拉曼光谱和X射线衍射法对比研究

准确测量和分析SiC纤维增强Ti合金复合材料(SiC_f/Ti)中残余应力状态对优化复合材料的成型工艺和理解其失效模式具有重要意义,但其残余应力的实验测量和分析仍是一个挑战.石墨C涂层作为SiC纤维与Ti17基体合金之间必需的扩散障涂层,承载了由纤维与基体之间热不匹配引入的残余应力.本文采用显微拉曼光谱法对比测量纤维表面C涂层在复合材料中和去掉基体无应力态下G峰的峰位,通过石墨C涂层应力态下峰位移动计算出SiCf/C/Ti17复合材料中SiC纤维受到～705.0 MPa的残余压应力.采用X射线衍射方法测量了不同方向上该复合材料中基体钛合金的晶面间距以获取其空间应变,根据三轴应力模型分析了复合材料中基体钛合金沿轴向方向的残余应力为～701.3 MPa的张应力,并通过线性弹性理论转化为SiC纤维的残余压应力为～759.4 MPa.两种测试方法都确定了SiC纤维在成型过程中受到残余压应力,且获得的应力值较为接近,都可以用于对SiC_f/Ti复合材料的残余应力测量.     

高效液相色谱法同时测定染发剂中11种氨基苯酚

建立了高效液相色谱测定直接型与氧化型染发剂中11种氨基苯酚含量的分析方法。样品在亚硫酸氢钠的保护下用甲醇提取,高速冷冻离心净化;采用Agilent Zorbax SB C18色谱柱分离,流动相为5 mmol/L庚烷磺酸钠-40 mmol/L pH 2.8磷酸盐缓冲液和乙腈,梯度洗脱,11种氨基苯酚分别于230、270和400 nm下检测。11种氨基苯酚在0.05～500 mg/L线性范围内相关系数不小于0.9992,4-氨基-3-硝基苯酚、2-氨基-5-硝基苯酚、3-硝基-4-(2-羟乙基)氨基苯酚的方法定量限为5 mg/kg,其他8种氨基苯酚包括对氨基苯酚、对甲氨基苯酚、间氨基苯酚、邻氨基苯酚、5-氨基-2-甲基苯酚、4-氨基-3-甲基苯酚、2-甲基-5-(2-羟乙基)氨基苯酚和2-氨基-4-硝基苯酚定量限为20 mg/kg,方法回收率为88.5%～109.5%,相对标准偏差为2.2%～8.3%。测定了多种市售染发剂,结果表明该方法操作简单、测定结果准确,可用于直接型与氧化型染发剂中11种氨基苯酚的测定。     

超支化聚(酰胺-酯)的端基光致变色改性研究

采用丁二酸酐、三羟甲基氨基甲烷为主要原料,先在冰水浴条件下合成AB3型单体,然后进行熔融缩聚制得超支化聚(酰胺-酯)(HBP),最后用4-(4′-二甲氨基苯基偶氮)苯甲酸对HBP的末端羟基进行功能化改性,得到了一种具有光致变色和酸碱变色性的HBP;用紫外光谱对改性超支化聚(酰胺-酯)的变色性进行了研究。结果表明：随紫外光照时间延长紫外吸收强度增加;随pH值增大紫外吸收波长向短波方向移动。     

Intensity tuning characteristics of double-mode He--Ne laser with optical feedback

This paper investigates the intensity tuning characteristics of a double longitudinal modes He--Ne laser subjected to optical feedback. The intensity undulations of the total light and the two modes are observed for different external cavity length. Two modulations of the internal cavity length are performed. One is only for the internal cavity length being modulated and the other is for both the internal and the external cavity length being modulated. The undulation frequency of the total light is found to be determined by the ratio of external cavity length to internal cavity length in both modulations. When the external cavity length is integral times of the internal cavity length, the fringe frequency of the total light could be seven or even more times of that in conventional optical feedback. A simple theoretical analysis is presented, which is in good agreement with the experimental results. The potential use of the experimental results is also discussed.