饲料中添加不同核苷酸对大黄鱼生长、血液指标及血清酶活性的影响

实验以对照组饲料和分别添加0.1%的5’-尿苷一磷酸二钠(UMP)、5’-腺苷一磷酸二钠(AMP)、5’-胞苷一磷酸二钠(CMP)、5’-鸟苷一磷酸二钠(GMP)、5’-肌苷一磷酸二钠(IMP)和以上5种核苷酸(1:1:1:1:1)混合物(Mix)的实验饲料(粗蛋白:45.0%;粗脂肪:10.0%)喂养大黄鱼(平均初始质量为(5.57±0.01)g)64d,研究饲料中不同核苷酸的添加对大黄鱼生长性能、血液常规指标和血清酶活性的影响.实验结果表明,不同核苷酸的添加对大黄鱼的生长性能、饲料效率、体成分及血液常规指标基本无显著性影响(P0.05).但肌苷酸组和核苷酸混合物组血清中葡萄糖含量要显著高于其他各组(P0.05),鸟苷酸组胆固醇和甘油三酯含量要显著高于其他各组(P0.05).血清酶活性数据表明,腺苷酸和鸟苷酸组的谷丙转氨酶和谷草转氨酶活性要显著高于其他各组(P0.05).腺苷酸、鸟苷酸、肌苷酸和核苷酸混合物组的溶菌酶活性显著高于其他各组(P0.05),而超氧化物歧化酶活性在各处理组间无显著性差异(P0.05).总体而言,饲料中不同核苷酸的添加对大黄鱼生长和血液常规基本无显著性影响,而肌苷酸和核苷酸混合物的添加能够提高血清中葡萄糖含量,促进饲料中糖源的吸收;腺苷酸、鸟苷酸、肌苷酸和核苷酸混合物对大黄鱼的非特异性免疫能力的改善有一定作用.     

基于Shark-Hartmann理论的波前探测技术研究

精确的波前探测是反射镜面型检测及光束波前畸变测量的重要依据,论文根据Shark-Hartmann理论对波前探测技术进行了模拟和实验研究。将平行光经过球面透镜/柱面透镜后形成的球面波/柱面波作为探测波前。实验采用商用的微透镜阵列和CCD搭建Shark-Hartmann传感器,利用实际光束作为参考光,避免了参考光的不准直性对实验的影响。模拟计算结果表明平均曲率误差为13.423 mm,实验结果实现了对球面/柱面/倾斜波的探测及复原。     

Gemini型表面活性剂疏水链中肉桂酸基团的光致二聚反应

采用紫外光谱、 红外光谱和质谱研究了Gemini型表面活性剂N,N'-二对丁氧基肉桂酰胺基胱氨酸钠(SDBCC)溶液的光化学反应过程和产物, 分析了SDBCC浓度对分子疏水链中肉桂酸基团光化学反应产物分布和光致二聚产率的影响. 结果表明, 在不同浓度下, SDBCC分子疏水链中的肉桂酸基团的光化学反应过程均以光致二聚反应为主, 且为分子内光致二聚产物. 但聚集体形成前后在光照过程中肉桂酸基团的光致二聚反应产率随SDBCC浓度的变化趋势不同, 聚集体形成前光致二聚反应产率随浓度的增加而增大, 聚集体形成后光致二聚反应产率随浓度的增大而减小. 综合光化学反应过程、 拓扑条件和聚集体结构进一步分析了胶束和囊泡的存在对SDBCC分子疏水链中肉桂酸基团光致二聚反应的影响.     

采用改进PI迟滞模型的压电微夹钳前馈控制

为减小压电微定位平台的迟滞误差, 设计前馈控制器对其进行控制. 首先在使所建平台迟滞模型精度达到要求并使各阈值点精度相同的情况下, 对平台迟滞模型的阈值进行优化, 得到满足模型精度要求的最小算子数, 进而建立了平台的PI(Prandtl-Ishilinskii)迟滞模型通过对所建迟滞模型求逆, 设计出平台的前馈控制器; 最后在所设计的前馈控制作用下, 使平台达到5μm理想阶跃值的响应时间为0.01s稳态误差中线的变化范围为0.40~0.50μm 当期望平台输出最大值为17μm变幅值三角波位移时, 实测位移相对于理想位移的误差中线变动范围为1.15~ -0.05μm. 所设计前馈控制器可有效减小压电微定位平台的迟滞误差.     

热屏结构对泡生法蓝宝石单晶炉功率影响研究

蓝宝石晶体因优异的综合性能被广泛用于航空航天等高性能要求领域.泡生法是目前生产大直径蓝宝石单晶的主要方法,热场对生产工艺、产品质量和单晶炉功率具有重要影响;并将影响生产成本.本文对氧化锆及钼金属组合式热屏中氧化锆材料内置、外置及材料不同组合方式对泡生法蓝宝石单晶炉功率的影响进行研究,得到合理的热场结构;并与实际生产结果进行验证.结果表明:相比于传统的15层钼保温结构,加入氧化锆保温层会明显降低单晶炉能耗,其中氧化锆内置的热场结构对单晶炉能耗降低影响更为明显;随着氧化锆层由0增加至15层,单晶炉能耗显著降低,相比传统15层钼保温结构,15层氧化锆保温结构炉体功率降低了38;.     

力平衡法测量大气压强

依据力平衡法原理,重新构思、设计了测量大气压强的实验方案及装置,力学传感器的使用,提高了大气压强测量中的关键物理量的测量精度;采用最小二乘法,实现了大气压强的巧妙测量.     

Synchronization of the fractional-order generalized augmented L u¨system and its circuit implementation

In this paper, the synchronization of the fractional-order generalized augmented Lu¨ system is investigated. Based on the predictor–corrector method, we obtain phase portraits, bifurcation diagrams, Lyapunov exponent spectra, and Poincare′maps of the fractional-order system and find that a four-wing chaotic attractor exists in the system when the system parameters change within certain ranges. Further, by varying the system parameters, rich dynamical behaviors occur in the2.7-order system. According to the stability theory of a fractional-order linear system, and adopting the linearization by feedback method, we have designed a nonlinear feedback controller in our theoretical analysis to implement the synchronization of the drive system with the response system. In addition, the synchronization is also shown by an electronic circuit implementation for the 2.7-order system. The obtained experiment results accord with the theoretical analyses,which further demonstrate the feasibility and effectiveness of the proposed synchronization scheme.     

Finite-time sliding mode synchronization of chaotic systems

A new finite-time sliding mode control approach is presented for synchronizing two different topological structure chaotic systems. With the help of the Lyapunov method, the convergence property of the proposed control strategy is discussed in a rigorous manner. Furthermore, it is mathematically proved that our control strategy has a faster convergence speed than the conventional finite-time sliding mode control scheme. In addition, the proposed control strategy can ensure the finite-time synchronization between the master and the slave chaotic systems under internal uncertainties and external disturbances. Simulation results are provided to show the speediness and robustness of the proposed scheme. It is worth noticing that the proposed control scheme is applicable for secure communications.     

空间用GaN功率器件单粒子烧毁效应激光定量模拟技术研究

利用飞秒脉冲激光对氮化镓(GaN)功率器件进行单粒子烧毁效应定量评估技术研究,针对器件结构建立脉冲激光有效能量传输模型,理论计算了激光有效能量与重离子线性能量传输(LET)的等效关系并开展了试验验证.考虑器件材料反射率与吸收系数对激光的影响,针对介质层界面间的激光多次反射进行参数修正,减小有源区有效能量计算误差.选择一款氮化镓高电子迁移率晶体管(GaN HEMT)与一款肖特基势垒二极管(SBD)功率器件作为典型案例,分别开展飞秒脉冲激光正面与背部辐照试验,计算诱发单粒子烧毁的有效能量,并得到不同入射激光波长的烧毁等效LET阈值,对比了模型理论计算值与实际测量值.同时,研究结果对材料参数未知的GaN功率器件,提供了正面与背部辐照模型的激光试验波长选择参考.该工作将为激光定量评估空间用GaN等宽禁带半导体器件的单粒子烧毁效应机理研究及加固设计与验证提供技术支撑.     

High-sensitivity Bloch surface wave sensor with Fano resonance in grating-coupled multilayer structures

A new type of device consisting of a lithium niobate film coupled with a distributed Bragg reflector (DBR) was theoretically proposed to explore and release Bloch surface waves for applications in sensing and detection. The film and grating made of lithium niobate (LiNbO₃) were placed on both sides of the DBR and a concentrated electromagnetic field was formed at the film layer. By adjusting the spatial incidence angle of the incident light, two detection and analysis modes were obtained, including surface diffraction detection and guided Bloch detection. Surface diffraction detection was used to detect the gas molecule concentrations, while guided Bloch detection was applied for the concentration detection of biomolecule-modulated biological solutions. According to the drift of the Fano curve, the average sensor sensitivities from the analysis of the two modes were 1560 °/RIU and 1161 °/RIU, and the maximum detection sensitivity reached 2320 °/RIU and 2200 °/RIU, respectively. This study revealed the potential application of LiNbO₃ as a tunable material when combined with DBR to construct a new type of biosensor, which offered broad application prospects in Bloch surface wave biosensors.